Kullanılmış Häcker Maschinen Gmbh Filterpresse Typ 01.120 satın al (71.308)

Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, We offer an as-new HÄCKER chamber filter press Type 01.120 with a new control cabinet. Electrohydraulics with double-acting cylinder. Equipped with new filter plates, which can be configured according to application requirements. Including the following additional equipment: - Automatic plate shifting device with automatic shaking mechanism - Light curtains on both sides - Automatic filtrate drip plates Technical data: Condition: Demonstration unit, unused Plate size: 1,200 x 1,200 mm Number of chambers: optional, depending on plate pack and application Cake thickness: optional, depending on plate pack and application Capacity: 2,650 litres Filter area: 175 m² Operating pressure: 10 bar Drive power: 2.2 kW Open discharge via filtrate corner, equipped with filtrate trough. We can also offer a HÄCKER piston pump to match this filter press. Nljdpfx Aeyhn H Tokneb For further details and technical queries, please feel free to contact us at the provided telephone number or email address at any time.

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, We offer a factory-refurbished HÄCKER chamber filter press type 01.080 with automatic control. Electrohydraulics with single-acting cylinder Raised design for placing tipping containers underneath Control of the feed pump with automatic 'press full' detection. Technical data: Condition: used, factory-refurbished Plate size: 800x800mm Nlsdpfx Ajyhnyasknob Number of chambers: 40 Cake thickness: 25mm Capacity: 500L Filter area: 44m² Feed pressure: 10 bar Open discharge via filtrate corner, with filtrate channel, drip tray possible. We can also offer a used HÄCKER piston pump to match this filter press. For further details and technical inquiries, please do not hesitate to contact us at the provided phone number or email address.

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, We offer a factory-refurbished HÄCKER chamber filter press, model 01.080. Electrohydraulic system with single-acting cylinder Raised design to allow placement of tipping containers underneath Technical data: Nsdpfxoyhnwlo Aknslb Condition: used, factory-refurbished Plate size: 800x800 mm Number of chambers: 40 Cake thickness: 25 mm Capacity: 500 liters Filter area: 44 m² Operating pressure: 10 bar Open discharge via filtrate corner, with filtrate trough and drip plates. We can also offer a used HÄCKER piston pump suitable for this filter press. For further details and technical questions, please contact us at the provided phone number or email address at any time.

Koşul: yeni gibi (kullanılmış), Üretim yılı: 2019, çalışma saatleri: 39 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: MZ-7321/19 / 11024, toplam yükseklik: 2.198 mm, toplam genişlik: 1.648 mm, toplam uzunluk: 3.500 mm, toplam ağırlık: 3.500 kg, rotor çapı: 400 mm, rotor genişliği: 850 mm, giriş akımı türü: Klima, giriş voltajı: 400 V, dönüş hızı (maks.): 100 dev/dak, güç: 30 kW (40,79 bg), Yeni gibi tek şaftlı kırıcı / parçalama tesisi, hafif kullanım izleriyle. Sadece test amaçlı kullanılmıştır. Rotor mili, düz zırhlı olarak donatılmıştır. Rotor bıçakları için 34 x 34 mm kartuş teknolojisi. E-motor 30 kW, toplam kurulu güç 37 kW, hidrolik güç 3,75 kW, 400 V, 3 fazlı. Yedek parça olarak ayrıca yeni rotor ve stator bıçakları mevcut. Almanca kullanım kılavuzu dahil. Üç parçalı ve ayarlanabilir stator bıçakları. Hazne kapatılabilir, delikli sac 40 mm. Makine çalışır durumda gösterilebilir. Satış sonrası garanti yoktur. Fabrikadan ücretsiz yükleme - Raesfeld. Talep üzerine detaylı fotoğraflar temin edilebilir. Ön satış hakkı saklıdır. Fiyatlar net fiyattır. Nljdpfx Aoy E S S Ajknob

Koşul: ikinci el, Rotating Device Gunter Seibold Rotating Device for HTS Coils – Infinitely variable drive control (Type S05082) Description: Professional rotating device for mounting and rotating HTS coils with winding core. Designed for the even distribution of two-component resin during the curing process. Ideal for development, laboratory, or production environments with high temperature superconductor (HTS) coils. The winding form is electrically heated, with direct energy supply into the mold (not included). The machine stands out due to its precise control, user-friendly operation, and service-oriented design. Technical Specifications Robust Machine Frame: Welded square tube construction with adjustment screws and floor anchors Drive: - Three-phase planetary gear motor (11 kW, 400 V, 50 Hz, 3-phase) - Infinitely variable speed adjustment (0.2 – 100 rpm) - Soft start & stop via frequency inverter (4-quadrant controller) - Electromagnetic spring-applied brake (safe stopping in case of power failure) - Reversible rotation direction (left/right) Control Panel: 5.7" touch panel for adjustment of speed, direction, ramp profiles, time, or number of revolutions Emergency stop button, ergonomically integrated Nlodpfx Aexwmkueknsb 2 programmable analog inputs Electrical & Control Cabinet: Control integrated into the machine frame 400 V / 230 V supply, 24 V DC control voltage Circuit breakers, RCD protection 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with air-conditioning unit Complete grounding and static discharge of the main shaft Workplace lamp: swiveling and height adjustable Feature / Value Max. coil diameter: 1,500 mm Coil passage: 1,700 mm Center height above floor: 1,100 mm Max. load on faceplate: 500 kg Faceplate Ø 600 mm, 4 T-slots (DIN 650) Speed range: 0.2 – 100 rpm (stepless) Torque: 775 – 539 Nm Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Connected load: 11 kW Connection current: 32 A Color scheme (according to RAL) Base machine: blue (RAL 5010) Moving parts: yellow (RAL 1021) Control panel / control cabinet: light grey (RAL 7035 / 5010) Weight: approx. 1800–2000 kg Condition: used Scope of delivery: (see picture) (Specifications and data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Üretim yılı: 1979, Koşul: ikinci el, Makine (ek): Şıra soğutucu Kapasite: 150 hl/h Basınç: 6 bar Maksimum sıcaklık: 100 °C Uzunluk: 2550 mm Genişlik: 900 mm Yükseklik: 2000 mm Nedpfx Aovcqtzeknjlb Malzeme: paslanmaz çelik Temel yapı: çerçeve üzerinde Ekipman: 2 aşamalı, bağlantı genişlikleri: DN65 (şıra, su) ve DN80 (buzlu su) Yardımcı Ekipmanlar: Şıra havalandırma, karıştırma pompası, basınç yükseltme pompası (su), Ağırlık: 1080 kg

Koşul: yeni, Üretim yılı: 2025, çalışma saatleri: 30 h, Panel benders (also known as swivel bending machines or folding machines for sheet metal) are used in numerous industries where precise, automated bending of sheet metal parts is required. Key application sectors include: 🏭 Metal & Sheet Metal Processing • Contract manufacturers / Sheet metalworking shops • Series and one-off production • Manufacture of enclosures, covers, cassettes, boxes 🚗 Automotive Industry & Suppliers • Structural and body components • Brackets, covers, interior components • Particularly suitable for series production requiring high repeatability ⚡ Electrical Engineering & Electronics • Control cabinet and distribution board manufacturing • Housings for controls, servers, industrial electronics • Frequently used due to numerous 90° bends and complex contours ❄️ Household Appliances & White Goods • Washing machines, refrigerators, ovens • Inner frames, coverings, cladding 🏗️ Construction & Architecture • Façade elements • Roof and wall cladding • Metal panels, cassettes 🚆 Transport & Mobility • Rail vehicles, buses, commercial vehicles • Interior cladding, technical housings 🛠️ Mechanical Engineering & Plant Construction • Machine frames • Protective covers • Control cabinet enclosures Nlodpsyb Hu Nefx Aknjb 🌬️ HVAC / Air Conditioning Technology • Ventilation ducts • Air conditioning unit housings • Air distribution systems 🏥 Medical Technology • Equipment housings • Stainless steel cladding • High requirements for precision and surface finish Why panel benders for these industries? ✔ High degree of automation ✔ Excellent repeatability ✔ Ideal for complex bent parts ✔ Gentle processing of painted or coated sheets ✔ Fast for small to medium batch sizes

Koşul: yeni, Üretim yılı: 2025, Fonksiyonellik: tamamen fonksiyonel, çalışma saatleri: 30 h, ✅ 1. Metal processing companies with medium to high production volumes Nljdpfoyb I Azjx Aknob 🔹 Series production / repeat parts If you are manufacturing many identical or similar components, automation is worthwhile because it reduces unit costs and ensures consistent quality. 🔹 High output > 1,000 parts/month The higher the output, the quicker the investment pays off through productivity gains. ✅ 2. Companies facing skilled labor shortages or high workloads 🔹 Difficulty finding or retaining skilled personnel A robot can partially replace qualified operators and maintain production capacity. 🔹 Night shifts / 24/5 production Robots can work longer and without fatigue → increased output without additional personnel. ✅ 3. Operations with complex bending processes or high quality requirements 🔹 Tight tolerances / minimizing small errors A robot ensures consistent repeatability. 🔹 Complex downstream processes (e.g. handling, deburring, stacking) An integrated robot can take over tasks otherwise performed manually. ✅ 4. Manufacturers facing tight deadlines or cost pressure 🔹 Short lead times required Automation shortens throughput times. 🔹 Cost pressure due to competition Longer machine utilization and lower unit costs enhance competitiveness. ✅ 5. Companies that focus on future viability 🔹 Industry 4.0 / digitalization An automated press brake can often be integrated more efficiently into IT/MES systems. 🔹 Scalable production If you plan to grow in the future, you have a flexible foundation.

Koşul: yeni, Üretim yılı: 2026, Fonksiyonellik: tamamen fonksiyonel, Donanım: CE işareti, Giriş seviyesi Panel Bükme Merkezi Nedpfey H Huhex Aknjlb Detaylı bilgi ve size özel bir teklif için lütfen bize talebinizi gönderin. Talebinizi en kısa sürede değerlendirecek ve sizinle iletişime geçeceğiz.

Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Redüktörlü yavaş çalışan öğütücü Kesme genişliği - 250 mm Nodpfxsyf I Tbe Aknjlb Motor gücü - 3 kW Rotor hızı: 100 d/dk Rotor bıçak sayısı - 20 adet Stator bıçak sayısı - 2 adet 8 adet mevcut, durumu kusursuz Kapasite 50 kg/saat'e kadar Fiyat: adet başına 1350 EUR

Koşul: yenilenmiş (kullanılmış), Üretim yılı: 2011, Fonksiyonellik: tamamen fonksiyonel, The subject of this offer is a compact bun dividing and rounding machine, Mini Rex Futura, which is distinguished by high efficiency and a wide weight range while maintaining excellent dough processing quality. MACHINE DESCRIPTION Nedpfx Akey Angqjnslb Bun Divider-Rounder Mini Rex Futura, year 2011 Manual dough loading into the hopper 2-row operation Manual product collection from the discharge conveyor Capacity: 33 cycles/min; 3,960 pieces/hour Weight range: L: 25g – 75g; H: 70g – 140g Control panel Dough types: wheat, wholemeal, yeast, donuts Single-person operation Machine dimensions (H x L x W): 1800 x 1770 x 650 mm Availability: Expected refurbishment completion date: end of May this year. Sample photo of a similar machine after a complete overhaul in Cream Serwis. Contact us for a price quote and further details.

Koşul: yenilenmiş (kullanılmış), Üretim yılı: 2009, Fonksiyonellik: tamamen fonksiyonel, The subject of this offer is a used G2000 bread roll production line with a Mini Rex Futura divider-rounder from 2009. Designed for the production of: • marked round rolls • unmarked elongated rolls • cut rolls • rolled rolls • kaiser rolls • hot dog rolls • Poznań rolls Product description: • Fully automatic and compact bread roll production line • Based on the rotary Mini Rex Futura divider-rounder manufactured in 2009 • 2-row operation • Manual collection of finished products from the discharge conveyor • Marking station with easily interchangeable tools; set includes: kaiser and Corinthian head • Integrated elongating and flattening unit • Weight range: - for marked rolls: 25g to 75g dough piece – capacity: 1,800 pcs/h to 2,640 pcs/h - for unmarked rolls: 80g to 125g dough piece – capacity: 1,800 pcs/h to 3,960 pcs/h • Proofing time: approx. 6 minutes at 2,000 pcs/h output • Dough types: wheat, graham, yeast dough, donuts Nledpfjy And Nex Aknob • Single-operator operation The machine is currently undergoing a general overhaul, which should be completed by mid-June 2026. The photos show a similar bread roll line after general overhaul at Cream Serwis. If you are interested in the price and would like to receive more photos, please contact us.

Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, slow-speed shredder Cutting width – 150 mm Motor power – 2.2 kW Rotor speed 200 rpm Number of rotor knives – 9 units Number of stator knives – 2 units Nledeyf I N Aspfx Aknjb 6 units available, condition excellent Throughput up to 25 kg/h Price 1000 EUR per unit

Koşul: yeni, Üretim yılı: 2025, Kapasite 1020 x 2,5 mm (ST37) Üst kirişin ayak kenetlenmesi ile teslimi Üst kirişteki yüksek bölümler Bükme ve alt kiriş de bölümlere ayrılmıştır RAL 7016 boya İmalatı AB hemen teslim fabrika teslimi Talep üzerine navlun maliyetleri Nljdpfx Aksfifbbonsb

Koşul: yeni, Üretim yılı: 2025, Kapasite 2020 x 2 mm (ST37) Üst kolun elle kaldıraç kolu sol + sağ Üst kirişte eğimli segmentler Sürekli bükülme ve alt kiriş rayları RAL 7016 boya İmalat AB teslimi fabrikada teslim edilebilir Teslim maliyetleri talep üzerine Nsdofifa Aspfx Aknelb

Koşul: yeni, Üretim yılı: 2025, Aşağıdaki kapasitelerde mevcuttur: 1100 x 4 / 1100 x 5 / 1100 x 6 mm 1370 x 4 / 1370 x 5 / 1370 x 6 mm 1600 x 4 / 1600 x 5 / 1600 x 6 mm 2100 x 4 2600 x 4 mm 3100 x 4 mm Standart versiyon: -Bilyalı vidalı 750 mm NC kontrollü arka stop -Kesme sayacı dahil NC kontrolör -tek kesim, sürekli kesim ve kademeli mod değişimi -acil durdurmalı hareketli ayak pedalı -T ile sol tarafta açılı durdurma -palet -tabla uzatma -tablada bilyalı makaralar -önden manuel kesim aralığı ayarı -Kesim hattının aydınlatması -Tamamen çelik bıçak, 2 kenarlı -Cilalı sacları korumak için sert kauçuk şeritli sac tutma cihazı -Hafif Güvenlik ızgarası (CE) yerine makinenin arkasında perde (CE) -Katlanabilir ön güvenlik ızgarası (CE) -Makinenin ön tarafında optik fonksiyon göstergesi -CE uygunluğu -2 yıl tam garanti -3 yıl motor ve dişli Opsiyonel aksesuarlar: -Derece ölçeği ve mm bölmeli ayarlanabilir açı durdurma -Pnömatik sac tutucu -ELGO 9521 NC kontrolör - önden tabaka çıkartma, pnömatik sac destek sistemi dahil önden sac çıkartma (NC kontrolör FUJI dokunmatik ekranlı (göndericiye geri dönüş) ile tüm kesme uzunluğu boyunca isteğe bağlı olarak öne veya arkaya sac çıkartma) - eğim durdurmalı masa uzatma ve T-yuvaları -VA- Çelikler için özel bıçak - müşteri isteğine göre özel renk Nledpfx Asgu N E Dsknjb

Koşul: iyi (kullanılmış), Yatay bant zımpara makinesi Çalışma yüksekliği: 950 mm Yükseklik: 1300 mm Genişlik: 700 mm Derinlik: 1000 mm Ağırlık yaklaşık 80 kg (net) Nlsdpfxoxdb D Ae Aknjb

Koşul: ikinci el, To ensure the long-term performance, precision, and operational safety of your sheet metal processing machines, it is essential to carry out regular maintenance, repair, and inspection tasks in accordance with manufacturer specifications and legal requirements. Our qualified service technicians perform these tasks professionally and reliably. This includes: • Maintenance work to ensure trouble-free operation (cleaning, lubrication, inspection, and replacement of wear parts) • Repairs in the event of malfunctions or failures, including diagnostics, restoration, and adjustment Nlodpfx Aksygk Epsnsb • Inspections according to DGUV Regulation 3 and the Machinery Directive to verify safety and performance Upon completion of the work, you will receive comprehensive documentation of all measures carried out, including test reports and recommendations for any potential follow-up actions. We are happy to provide you with a tailored quotation or schedule a maintenance appointment according to your operational requirements.

Koşul: ikinci el, Üretim yılı: 2012, Heating Element Welding Machine with Infrared Technology (Upper & Lower Section) – Year of Manufacture 2012 For sale is a robust and reliable heating element machine featuring infrared emitters, equipped with both upper and lower sections. The system has previously been used for welding two housing halves and is ideally suited for thermoplastic materials or similar applications. Manufactured by MTV, the machine is technically well-designed and intended for continuous industrial operation. A comprehensive German-language operating manual is included. Technical Data Nedpfexyibzex Aknelb Machine Dimensions - Width: approx. 2,325 mm - Depth: approx. 1,350 mm - Height: approx. 2,130 mm - Weight: approx. 800 kg Electrical Connection Data - Operating voltage: 400 V AC - Control voltage: 24 V DC - Protection: 16 A - Frequency: 50 Hz - Supply line: 5 × 2.5 mm² Pneumatics - Operating pressure: min. 6 bar – max. 8 bar (constant) Description / Condition - Year of manufacture: 2012 - Location: Thuringia - Application: Thermal welding of plastic components - Previous use: Welding two housing halves - Design with infrared heating elements for efficient and uniform heating - Very robust industrial-grade construction - Good overall condition _____ Our general terms and conditions (GTC) apply; furthermore, the seller assumes no liability for typographical or data transmission errors. The visual condition of the items offered corresponds to their age and the images shown. The technology and wear of the items offered are consistent with their age. Used machines are sold exclusively to commercial customers and without warranty.

Üretim yılı: 1990, Koşul: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Supply voltage: 380V, connected load: 7.5 kVA, specific power requirement: 2 kW/m². Global UV weathering tests with a global spectrum [similar to xenon arc], but using fluorescent lamps. Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature stability: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% RH Nedpfx Asytr Sweknjlb Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles combining UV exposure, temperature control, and optional humidity or condensation phases realistically simulate environmental stress and enable reproducible testing. Dismantling by purchaser.

Koşul: mükemmel (kullanılmış), Üretim yılı: 2020, Fonksiyonellik: tamamen fonksiyonel, Manufacturer: Speidel Tank- und Behälterbau Year of Manufacture: 2020 Technical Data: Usable capacity: approx. 1,250 liters Material: Stainless steel 1.4404 / AISI 316L Design: insulated (with thermal jacket / insulation jacket) Internal surface: suitable for food and pharmaceutical applications Operating pressure: atmospheric (storage tank) Temperature range: suitable for temperature-controlled media Connections: hygienic clamp fittings Manhole: present Bottom: conical (for complete discharge) Feet: height adjustable Application: This tank is ideally suited for the storage of pharmaceutical, cosmetic, or food-grade liquids. The tank was used as a CIP vessel in a pharmaceutical facility and operated under hygienic conditions. Typical applications include: - Interim storage of bulk goods - CIP buffer tank - Storage of alcohol, cleaning or disinfectant solutions - Integration into filling line processes Construction: - High-quality stainless steel design (316L) - Insulated vessel for temperature-controlled processes Nsdjy I Skwopfx Aknjlb - Hygienic design with clamp connections - Conical bottom for complete residue discharge - Industrial-grade build by German manufacturer Speidel Condition: - Very good condition - Used, well-maintained - Immediately available FAT / Documentation: - Operating manual available - Manufacturer documentation available Scope of delivery / Documentation: - Complete stainless steel tank - Insulation jacket - Documentation / operating manual - Nameplate available Special features: - Made in Germany quality (Speidel) - Suitable for pharmaceutical, cosmetic, and food applications - Ideal as a CIP buffer or holding tank - Compact design with high quality

Üretim yılı: 2025, Koşul: yeni gibi (sergi parçası), Fonksiyonellik: tamamen fonksiyonel, Connection: 3.55 kW / 230 V / 50 Hz Nodpsxiwc Ssfx Aknslb External dimensions WxDxH: 945 x 830 x 1025 mm External dimensions WxDxH (open): 945 x 830 x 1640 mm Weight: 60 kg Basket diameter: 600 mm Usable height: 380 mm Pump pressure: 2.2 bar Spray rate: 4,200 l/h Load capacity: 100 kg The soiled items to be cleaned are placed in the rotating wash basket, and the lid is closed. After setting the desired wash temperature and time, the device is switched on and the washing solution in the tank is heated. Within the closed unit, the basket rotates at a constant speed around its own axis. The pump units draw the washing solution from the wash tank and deliver it through 6 stainless steel spray arms equipped with overlapping flat jet nozzles. The items are intensively sprayed from all sides with hot solution while the basket rotates evenly, driven by the jet nozzles. After the cleaning process is complete, the unit switches off automatically. Advantages 1 horizontally mounted pump Output: 70 L/min 3 three-dimensional stainless steel spray arms Sturdy stainless steel construction Additional small parts cleaning basket made of stainless steel (Ø 170 mm) Rotating stainless steel wash basket, water jet driven Steam extraction Stainless steel perforated sheet with filter inlets above the wash tank Low water level protection

Üretim yılı: 2012, Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 9332067, ROLLER CONVEYOR - CONSTRUCTION BLASTING SYSTEM MANUFACTURER: RUMP TYPE: 20-W 1500-4 Manufacturer: Rump Model: 20W-1500-4 Year of manufacture: 2012 Please refer to the technical drawing for dimensions and operating hours. Includes filter system, sound insulation, control cabinet, complete documentation, etc. EXCELLENT CONDITION This is a fully operational, used machine. Nljdpfx Aey Entioknsb Sale is made without warranty or guarantee. Subject to prior sale and errors.

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2026, Vertical broaching machine VADARI GmbH Type SRM 2027- 60 kN – New machine – BROACHING MACHINES MADE IN GERMANY. - Currently available under special conditions - ==> Information for manufacturing companies or dealers with in-house production: Drawings, rights, spare parts, customer and prospect data, as well as planning and manufacturing documents (including concepts for a variant with 9 tons of pulling force) for the broaching machine can be purchased from us. If interested, please contact us. — Currently available under special conditions — ==> The new machines are custom-built to order. Short lead times for manufacturing and delivery possible. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available for immediate delivery. Cost-effective and extremely robust vertical broaching machine designed for many years of use. Broaching tools (including special broaches for internal splines, etc.) and accessories available on request. Please inquire separately. All broaching tools and tool holders from other manufacturers can be used on our broaching machine! Complete manufacturing and assembly are carried out at our plant in Germany. In addition, we offer spare parts for Wolff and VADARI SRM broaching machines (spindles, spindle nuts, motors, gears, and all other required components – including electrical equipment). Vertical Broaching Machine Type SRM 2027 – NEW MACHINE: The primary application is the production of keyways from 3-28 mm (and beyond), and profiles with similar dimensions. The compact, space-saving machine is suited for successful use in small, medium, and large workshops. The low price justifies acquisition even for small series and one-off jobs. The drive is provided by a multi-speed geared brake motor. The maintenance-free twin-spindle drive ensures smooth operation, a centralized pulling point, and constant cutting force. The open worktable allows large workpieces to be loaded without obstruction. Workpieces generally do not need to be clamped. Stroke is adjusted via limit switches with stroke limitation. For short hubs or workpieces, multiple parts can be stacked. Broaching needles, arbors, and spare parts available on request. Technical Data: Pulling force: 60 kN at 3 m/min, 40 kN at 6 m/min Broaching speed: 3 m/min + 6 m/min (Optionally: stepless speed control from 0 m/min to 6 m/min via extended electronics) Return speed: 6 m/min Stroke: 1050 mm Broaching tool length: 1200 mm Workpiece diameter: unlimited Worktable: 450 x 350 mm Table opening: 140 mm Weight: approx. 510 kg Floor space: 750 x 570 mm Njdjuqbnhopfx Aknolb Total machine height: 1510 mm Drive power: 3.7 / 4.4 kW Electrical equipment: 400 / 230 Volt 50 Hz Control voltage: 230 Volt Operating voltage: 400 Volt 50 Hz Paint finish: Outer RAL 7035/7036/7016, Inner RAL 3000 Safety door: Standard equipment Coolant system: Standard equipment The machine complies with current Machinery Directive and carries the CE marking.

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, Used Holdefleiss bottle filling and capping machine, type 12/3. The machine was set up for 0.5l Euro bottles and 0.33l Long-Neck bottles, including HDE. The machine does not have a pre-evacuation system and is equipped with long-tube filling valves. The filling valves are being newly re-sealed. Both tightness and pressure tests will be performed. Nedpfxsyycudj Aknelb