Kullanılmış Kraussmaffei Km 900 – 8100 Gx satın al (14.295)

Koşul: mükemmel (kullanılmış), Üretim yılı: 2015, Krauss Maffei Injection Moulding Machine KM 900 – 8100 GX Year of manufacture: 2015 General description: Hydraulic-mechanical, two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. The machine is equipped with a PV-type (proportional valve) injection unit adjustment system. Control is via a modern MC6 system, based on an industrial computer with real-time Ethernet technology. The control panel features an integrated 19-inch touchscreen with a colour display, LED backlighting, and full process visualisation using ProcessDesigner. Plasticising unit: Complete unit for thermoplastics processing Wear-resistant (abrasion-proof) version Screw diameter: 105 mm Shut-off valve and open nozzle Technical specifications: Clamping unit: Clamping force: 9,000 kN Mould opening force (pressure pads): 630 kN Platen dimensions (W x H): 1,660 x 1,530 mm Tie bar clearance: 1,180 x 1,000 mm Maximum mould opening stroke: 1,600 mm Mould height (min – max): 500 – 1,100 mm Maximum opening stroke: 2,100 mm Ejector stroke: 300 mm Ejector force (forward / retract): 140 / 70 kN Injection unit: Screw diameter: 105 mm L/D ratio: 23.0 Injection pressure: 1,778 bar Shot volume: 4,546 cm³ Shot weight (for PS): 3,228 g Injection rate: 805 cm³/s Screw speed (standard): 150 rpm Nozzle contact force: 166 kN Electrical & hydraulic equipment: Pump motor power: 120 kW Heater power: 59 kW Number of heating zones (barrel): 7 Dry cycle time / stroke (Euromap 6): 3.3 s / 826 mm Dry cycle time / stroke (KM standard): 2.9 s / 590 mm Oil tank capacity: 1,450 l Hnodpfxowyxbgj Alcel Dimensions & weight: Net weight (with control cabinet): 40 tons Machine dimensions (L x W x H): 10.72 x 3.03 x 2.51 m

Koşul: yeni, Üretim yılı: 2025, Injection Moulding Machine – Krauss Maffei KM 651-6100 GX Year of manufacture: 2025 Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen. PV – injection unit control. MC6 control system based on an industrial computer featuring real-time Ethernet technology, equipped with an integrated 21.5” operator panel with colour touchscreen. Plasticising unit Complete plasticising unit for thermoplastics, screw diameter 95 mm, with non-return valve and open nozzle Nozzle radius: 25 mm Nozzle bore: 9 mm Technical data (standard version) Clamping unit Clamping force: 6500 kN Opening force: 455 kN Platen dimensions (H x V): 1660 x 1530 mm Tie bar spacing (H x V): 1200 x 1020 mm Opening stroke: 1450 mm Mould height (min.–max.): 450 – 1000 mm Daylight: 1900 mm Ejector stroke: 300 mm Ejector force front/rear: 140 / 70 kN Injection unit Screw diameter: 95 mm L/D ratio: 23.0 Injection pressure: 1795 bar Injection volume: 3367 cm³ Shot weight (PS): 2391 g Hodpfx Aexdd U Djlconl Injection speed: 110 mm/s Injection rate: 780 cm³/s Screw speed (standard): 147 rpm Plasticising throughput (at standard screw speed): 102 g/s Nozzle contact force: 166 kN Electro-hydraulic system Pump motor power: 97 kW Installed heater capacity: 54 kW Number of barrel heating zones: 7 Dry cycle time to Euromap 6: 3.3 s / 840 mm Dry cycle time to KM standard: 2.9 s / 600 mm Oil tank capacity: 1435 L Linear Robot – Krauss-Maffei LRX 250 Payload < 25 kg (gripper + drives + parts) Part deposit on non-operator side Axes: X axis (from mould): 900 mm, servo motor Y axis (vertical, telescopic, with motor brake): 1000/1000 mm, servo motor Z axis (crosswise): 2500 mm, servo motor Dimensions and weight Net weight (with control cabinet): 38.5 t Machine dimensions (L x W x H): 10.19 x 3.03 x 2.51 m

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2005, çalışma saatleri: 60.000 h, Fonksiyonellik: tamamen fonksiyonel, sıkıştırma kuvveti: 9.500 kN, vida çapı: 105 mm, kolonlar arası açıklık: 1.400 mm, silindir hacmi: 4.546 cm³, enjeksiyon basıncı: 1.778 bar, enjeksiyon ağırlığı: 4.137 g, Kilit kuvveti 950 kN Maks. kalıp açma kuvveti 665 kN Hareketli plaka açma kuvveti 112 kN Hareketli plaka kapama kuvveti 117 kN Sıkıştırma plakası (y x d) 1960 x 1710 mm Açıklık (y x d) 1400 x 1150 mm Kalıp açma yolu 1800 mm Kalıp montaj yüksekliği min./maks. 600/1200 mm Açma genişliği: 2400 mm Enjeksiyon ünitesi: Vidalı çap 105 mm Ls/D oranı 23 Enjeksiyon basıncı 1778 bar Vuruş hacmi 4546 ccm Atış ağırlığı (PS) 4137 gr. Enjeksiyon akışı 805 ccm/sn Vida devri 126 1/dak. Plastikleştirme debisi 147 g/sn Meme ünitesi kuvveti 166 kN Elektrohidrolik donanım: Pompa motoru nominal gücü 110 kW Kurulu ısıtma gücü 59 kW Silindir ısıtıcısı kontrol bölgeleri 7 Yağ kapasitesi 1500 lt Ölçüler ve ağırlıklar: Hnodpfx Alox Hz I Njcjl Alan ihtiyacı yaklaşık 12,00 x 3,50 x 3,00 m Toplam ağırlık 67000 kg Maks. kalıp ağırlığı 20300 kg

Koşul: mükemmel (kullanılmış), Üretim yılı: 2018, Krauss Maffei KM 400-3000 GX Blue Power with Krauss Maffei LRX 250 Robot Year of Manufacture: 2018 Injection Unit: Screw diameter: 80 mm Shot weight: 1,464 g Injection pressure: 1,855 bar Dosage volume: 1,608 cm³ Clamping Unit: Clamping force: 400 t Tie bar distance: 920 x 830 mm Platen size: 1,280 x 1,240 mm Ejector: hydraulic Clamping unit: hydraulic Control System: MC5 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Min./max. mould installation height: 400 / 900 mm Air valve x 4 Hydraulic core pull x 4 Hot runner controller x 36 Self-sealing nozzle x 10 Injection unit hardened – bimetallic Proportional valve on injection unit – precise injection Function for automatic extraction of upper tie bar Machine has been regularly serviced by authorized Krauss Maffei service Robot Krauss Maffei LRX 250 Year of Manufacture: 2018 Hnsdpfey Sl D Esx Alcol High-speed robot 5-axis robot: all 5 axes driven by servo motors (electric): X, Y (telescopic), Z, B (rotation), and C Vacuum Touch control panel Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 22,650 kg Length/Width/Height: 7.58 x 2.73 x 2.32 m All machines offered are started up by our service technicians prior to sale. A video of the technical tests for the selected machine can be provided, or you may participate in live technical tests at our facility in Łódź. Price: On request

Koşul: ikinci el, Üretim yılı: 1998, çalışma saatleri: 98.806 h, sıkıştırma kuvveti: 40.000 kN, vida çapı: 130 mm, enjeksiyon ağırlığı: 8.100 g, toplam uzunluk: 4.900 mm, toplam yükseklik: 4.200 mm, toplam ağırlık: 255.000 kg, 2x KraussMaffei KM 4000-19000 MC – Injection Moulding Machines – Year of Manufacture 1998 For sale are two identical injection moulding machines by KraussMaffei, model KM 4000-19000 MC, featuring the MC3F control unit. These machines are especially suited for the production of large plastic components that require exceptionally high clamping force. The systems are fully equipped and include multiple peripheral devices for material feeding and process management. ## Technical Data * Manufacturer: KraussMaffei * Model: KM 4000-19000 MC * Control system: MC3F * Year of manufacture: 1998 * Machine hours: approx. 98,806 h * Clamping force: 40,000 kN * Max. shot weight: 8,100 g * Screw diameter: 130 mm ## Dimensions & Weight * Machine depth: 4,900 mm * Machine height: 4,200 mm * Machine weight: approx. 255,000 kg ## Equipment * Robot interface: KUKA KRC4 * Sequential injection controller: S.I.S.E. IS-Tech * Temperature control units: GWK * Dosing and mixing system: Motan Colormetric * Belt conveyor ## Machines * Machine No. 14 Hodpfeyt Hy Njx Alconl * Machine No. 15 The machines can be purchased individually or as a package. Viewing by appointment.

Koşul: ikinci el, Üretim yılı: 1998, çalışma saatleri: 99.161 h, sıkıştırma kuvveti: 32.000 kN, vida çapı: 130 mm, enjeksiyon ağırlığı: 8.100 g, toplam uzunluk: 4.900 mm, toplam yükseklik: 4.200 mm, toplam ağırlık: 230.000 kg, A high-performance injection molding machine from German manufacturer KraussMaffei is offered for sale. Hnodpfjyt H Dhex Alcol This is the KM 3200-19000 MC model, specifically designed for the production of large-volume plastic components and industrial-scale manufacturing. The machine provides exceptionally high clamping force and is ideally suited for applications involving technical plastic parts or oversized components. It features a clamping force of 32,000 kN, a screw diameter of 130 mm, and a maximum shot weight of 8,100 g, enabling the efficient production of large parts with significant material requirements. Additionally, the system is equipped with extensive peripheral equipment, including a robot interface for KUKA KRC4, a S.I.S.E. IS’Tech sequential injection controller, GWK temperature control units, and a Motan Colormetric dosing and mixing system. A belt conveyor is also included. Technical Data * Manufacturer: KraussMaffei * Model: KM 3200-19000 MC * Machine No.: IMM MC3F No.12 * Year of manufacture: 1998 * Operating hours: approx. 99,161 h Performance Data * Clamping force: 32,000 kN * Screw diameter: 130 mm * Maximum shot weight: 8,100 g Dimensions & Weight * Machine weight: approx. 230,000 kg * Machine depth: approx. 4,900 mm * Machine height: approx. 4,200 mm This machine offers a robust and established solution for industrial plastic processing and is particularly appealing to manufacturers requiring large-format injection molding capabilities. Additional information, photos, or inspection appointments are available upon request.

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 1999, çalışma saatleri: 57.830 h, Fonksiyonellik: tamamen fonksiyonel, sıkıştırma kuvveti: 3.000 kN, vida çapı: 70 mm, silindir hacmi: 1.047 cm³, Kilit kuvveti: 3000 kN Maks. kalıp açma kuvveti: 160 kN Hareketli plaka açma kuvveti: 86 kN Hareketli plaka kapama kuvveti: 68 kN Bağlama plakası (y x d): 995 x 1050 mm Açıklık mesafesi (y x d): 630 x 630 mm Kalıp açma yolu: 820 mm Kalıp montaj yüksekliği min.: 330 mm Açılma mesafesi: 1150 mm İtici kursu: 200 mm İtici kuvveti ileri/geri: 58 kN Enjeksiyon ünitesi: Vida çapı: 70 mm Ls/D oranı: 20 Enjeksiyon basıncı: 1778 bar Hacim: 1047 ccm Atış ağırlığı (PS): 953 g Enjeksiyon akışı: 400 ccm/s Vida devir sayısı: 218 1/dak Plastikleştirme debisi: 75 g/s Memede baskı kuvveti: 82 kN Elektrohidrolik donanım: Pompa motoru nominal gücü: 55 kW Kurulu ısıtma gücü: 30 kW Silindir ısıtma kontrol bölgeleri: 6 Yağ dolumu: 720 lt Boyutlar ve ağırlıklar: Alan ihtiyacı yaklaşık: 6,20 x 2,20 x 2,40 m Toplam ağırlık: 12500 kg Maks. kalıp ağırlığı: 3430 kg Hedpfoy Nk Tajx Alcenl Aksesuarlar: - Salınım elemanları Ek donanımlar: - 1 x hava valfi - 2 x çekirdek çekici - Euromap 12’ye göre robot arabirimi

Koşul: ikinci el, Üretim yılı: 2004, çalışma saatleri: 76.000 h, toplam yükseklik: 2.480 mm, toplam genişlik: 2.330 mm, toplam uzunluk: 9.830 mm, vida çapı: 70 mm, sıkıştırma kuvveti: 4.200 kN, silindir hacmi: 1.047 cm³, Kilit kuvveti: 4200 kN Kolon ölçüsü (y x d): 800 x 800 mm Plaka boyutu (y x d): 1270 x 1200 mm Minimum kalıp montaj yüksekliği: 380 mm Maksimum plaka aralığı: 1400 mm Açılma mesafesi: 1020 mm Vida çapı: 70 mm Vuruş hacmi: 1047 ccm Enjeksiyon basıncı: 1778 bar 2. Agrega 55, ø 22 Enjeksiyon basıncı: 1674 bar Hacim: 30 cm³ Plastikleştirme ünitesi 1 ile 2 arası mesafe: 300 mm (Huckepack düzeni / Z-konumu) Donanım Ekran dili Almanca 6x hidrolik çekirdek çekici Makine otomasyon olmadan Makine hammadde hunisi olmadan Dengeleme elemanları 16x kalıp ısıtıcısı Çift bileşenli enjeksiyon makinesi Makine boyutları UxGxY: 9,83m x 2,33m x 2,48m Hnjdpfx Ajyv E Ewolcel Toplam ağırlık: 23.090 kg

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2005, çalışma saatleri: 59.000 h, sıkıştırma kuvveti: 4.200 kN, vida çapı: 60 mm, silindir hacmi: 769 cm³, enjeksiyon basıncı: 2.200 bar, toplam uzunluk: 6.830 mm, toplam genişlik: 2.330 mm, toplam yükseklik: 2.480 mm, toplam ağırlık: 23.090 kg, Kapanma kuvveti: 4200 kN Gövde ölçüsü h x v: 800 x 800 mm Plaka boyutu h x v: 1270 x 1200 mm Minimum kalıp yüksekliği: 580 mm Maksimum plaka aralığı: 1300 mm Açılma yolu: 720 mm Vida çapı: 60 mm Enjeksiyon hacmi: 769 ccm Enjeksiyon basıncı: 2200 bar Donanım Ekran dili: Almanca Hodpfeyv E Dajx Alcsnl Hidrolik çekirdek çekme: 4x Makine, manipülatorsuz Makine, malzeme haznesiz Dengeleme elemanları Kalıp ısıtıcı 12x Makine boyutları U x G x Y: 6,83 m x 2,33 m x 2,48 m Toplam ağırlık: 23.090 kg

Koşul: mükemmel (kullanılmış), Üretim yılı: 2021, çalışma saatleri: 6.000 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 61033935, sıkıştırma kuvveti: 4.500 kN, Donanım: dokümantasyon / kılavuz, Krauss Maffei LRX 250 Robotu Hsdpow Dcppefx Alconl Detaylı teknik özellikler ekli dosyada.

Koşul: mükemmel (kullanılmış), Üretim yılı: 2007, Krauss Maffei KM 250-1900 C1 Injection Moulding Machine Year of manufacture: 2007 ✅ General information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of manufacture: 2007 Clamping system: fully hydraulic Control unit: MC4 with color monitor, control panel, and floppy disk drive 🔹 Clamping unit Clamping force: 2500 kN Opening force: 160 kN Platen traverse force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1050 mm Tie bar spacing: 630 x 630 mm Mould opening stroke: 820 mm Mould installation height: 330 mm Maximum daylight: 1150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN Hnodexak Ucepfx Alcol 🔹 Injection unit Screw diameter: 70 mm Injection pressure: 1778 bar Shot volume: 1047 cm³ Shot weight (PS): 953 g Screw speed: 218/306 rpm Injection rate: 400 cm³/s Throughput (PS): 75 g/s (standard), 105 g/s (increased speed) 🔹 Electro-hydraulic equipment Pump motor power: 55 kW Barrel heaters: 30 kW (6 zones) Dry cycles per Euromap: 1400 1/h Oil tank capacity: 720 l 🔹 Dimensions and weight Net weight (incl. control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Koşul: mükemmel (kullanılmış), Üretim yılı: 2007, INJECTION MOULDING MACHINE KRAUSS MAFFEI KM 300-1900 C1 Year of manufacture: 2007 Included: Wittmann W 731 robot General description We offer a used injection moulding machine from the renowned brand Krauss Maffei, model KM 300-1900 C1, equipped with a Wittmann W 731 robot. The machine features a fully hydraulic clamping system and a modern MC4 control system with a colour monitor, integrated operator panel, and floppy disk station. Plasticizing unit Complete plasticizing system designed for thermoplastics, featuring wear-resistant protection, equipped with a 60 mm diameter screw, non-return valve, and open nozzle. Technical data Clamping unit Clamping force: 3000 kN Mould opening force: 160 kN Movable platen force: – Opening: 86 kN – Closing: 68 kN Hnodpfxow Du Hte Alcel Platen dimensions (height x width): 995 x 1050 mm Tie bar spacing: 630 x 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Platen opening stroke: 1150 mm Ejector stroke: 200 mm Ejector force: 58 / 28 kN Injection unit Screw diameter: 60 mm Injection pressure: 2420 bar Shot volume: 769 cm³ Shot weight (PS): 700 g Screw speed (standard/option): 218 / 306 rpm Injection rate: 294 cm³/s Throughput: – Standard speed: 55 g/s – Increased speed: 78 g/s Electro-hydraulic system Pump motor power: 55 kW Heater power: 30 kW Number of barrel heating zones: 6 Dry cycles (Euromap): 1350 cycles/h Oil tank capacity: 720 l Dimensions and weight Net weight incl. control cabinet: 14.2 t Overall dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Koşul: mükemmel (kullanılmış), Üretim yılı: 2007, Krauss Maffei KM 250 – 1900 C1 Injection Moulding Machine Year of manufacture: 2007 Control system: MC4 Operating hours only – 8,900! Clamping unit: Clamping force: 2,500 kN Max. mould opening force: 160 kN Moving platen force – opening: 86 kN Moving platen force – closing: 68 kN Mould platen dimensions (H × L): 995 × 1,050 mm Tie bar clearance (H × W): 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1,150 mm Ejector stroke (hydraulic): 200 mm Ejector force (forward/back): 58 / 28 kN Injection unit: Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight (PS): 953 g Injection rate: 400 cm³/s Screw speed (standard/option): 218 / 306 rpm Max. plasticizing rate: 75 g/s Nozzle contact force: 110 kN Electro-hydraulic equipment: Pump motor power: 55 kW Installed heating power: 30 kW Hnsdpfxsw A N Hfs Alcel Number of barrel heating zones: 6 Oil tank capacity: 720 l Dimensions and weight: Machine dimensions (L × W × H): approx. 6.21 × 2.04 × 2.39 m Total weight: 14,500 kg Max. mould weight: 3,430 kg Accessories and additional equipment: Oil tank Anti-vibration pads 3 × core pullers 8 × hot runner control zones 2 × air valves Robot interface according to Euromap 67 Additional information: The machine is located in Poland Ready for collection Loading, transport, installation and commissioning can be arranged.

Koşul: yeni, Üretim yılı: 2023, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 61036721, sıkıştırma kuvveti: 6.500 kN, vida çapı: 70 mm, kolonlar arası açıklık: 1.110 mm, silindir hacmi: 1.078 cm³, enjeksiyon basıncı: 1.877 bar, enjeksiyon ağırlığı: 981 g, açılma hareketi: 3.200 mm, plaka yüksekliği: 1.540 mm, çekiş tipi: Hydraulisch, açık açıklık: 3.200 mm, alet ağırlığı: 2.200.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. The sophisticated GuideX sliding shoe absorbs forces optimally and increases tool life. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly and retains its value. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT color display with multi-touch functions CLAMPING UNIT - Clamping force: 6,500 kN - Maximum mold opening force: 455 kN - Clear width (h x v): 1,110 x 960 mm - Mounting platen (h x v): 1,540 x 1,440 mm - Mold installation height, min. - max.: 1,550 mm (without center platen) - Opening stroke: 3,200 mm - Maximum mold opening distance: 1,650 mm - Max. mold weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter/type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2,420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection flow rate: 396 cm³/s - Screw drive/speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter/type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1,877 bar - Shot volume: 1,078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection flow rate: 539 cm³/s - Screw drive/speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz / 3 phases with neutral conductor WEIGHT AND DIMENSIONS - Net weight: 43.5 t - Length x width x height: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing Hnodpow U N Ixsfx Alcol - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: single (BWAP), single (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: double (BWAP), double (FWAP) - Mold heating: 96-fold (3.5 kW) - Euromap interface for handling: E18 - Euromap interfaces (central computer): E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with rotary unit, servo-driven - Vertical center platen - Parallel clamping and opening process during injection with bar parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface signal interface for connecting an RPM system - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for “1-K dummy operation” - Interface for connecting a CoMo-Kistler Injection Basic System with good/reject part separation The machine is located at our plant in Parsdorf and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.

Koşul: mükemmel (kullanılmış), Üretim yılı: 2016, sıkıştırma kuvveti: 13.000 kN, Sıkıştırma kuvveti: 1300 t Vidalı mil çapı: 105 mm Kılavuzlar arası mesafe V: 1270 mm Kılavuzlar arası mesafe H: 1570 mm Vuruş hacmi: 4546 cm³ Tip: Yatay Tahrik: Hidrolik KM1300 - 8100 MX Üretim yılı: 2016 KM1300MX Kapatma kuvveti (ton): 1300 Piston kolu aralığı: 1570 x 1270 mm Kalıp yüksekliği min/maks: 700/1400 mm Plaka ölçüleri: 2210 x 1910 mm Açma strok: 2350 mm Maks. açılma mesafesi: 3050 mm Enjeksiyon ünitesi tipi 8100 MX Vidalı mil çapı: 105 mm Maks. enjeksiyon hacmi: 4546 cm³ Öz. enjeksiyon basıncı: 1778 bar Hodpfxjy Emure Alcsnl Merkezleme halkası ölçüsü: 315 mm Hidrolik çekirdekler: 4 + 4 Kalıp için ısıtıcı sayısı: 32 Soğutma devreleri: 8+8 Elektriksel kaskadlar: 12 Soğutma: 12 + 12 Hidrolik sıcak yolluk: 1x EUROMAP 6

Koşul: mükemmel (kullanılmış), Üretim yılı: 2013, Donanım: dokümantasyon / kılavuz, Machine KraussMaffei KM650-4300 GX Clamping force (kN): 6500 Tie bar spacing (h x v) mm: 1110 x 960 Mold opening stroke (mm): 1450 Minimum mold height (mm): 450 Maximum mold height (mm): 1000 Ejector stroke (mm): 250 Screw diameter (mm): 90 (for mixing HPS-M) L/D ratio: 20 Injection pressure (bar): 1839 Shot volume (cm³): 2290 Control version: MC5 Display language: German Condition: Tested, operational Equipment: - Anti-vibration leveling pads - BluePower – Servo pump drive for reduced energy consumption - Wear-resistant softener, optional extra - BluePower – Complete insulation of the plasticising cylinder for reduced energy consumption - 2x pneumatic valves on the moving platen for blow function - 2x pneumatic valves on the fixed platen for blow function - Pneumatic cascade control, 4-fold for hot runner system - Hydraulic cascade control, 4-fold for hot runner system - Conveyor belt control - Mechanical robot interface according to EUROMAP 18 - Hydraulically actuated ejector plate including threaded holes and through holes in the moving platen for ejector pins - Hydraulic core pull system, 2-fold on moving platen - Hydraulic core pull system, 2-fold on fixed platen - Pneumatic core pull system, 1-fold on moving platen - Pneumatic core pull system, 1-fold on fixed platen - Pressure relief for hydraulic core pulls - Pressure relief for hydraulic cascade valves - 20 hot runner control circuits - Socket combination (3 sockets, single-phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) - Volt-free contact for 'plasticising' signal at HAN 3A socket - Changeover to holding pressure depending on mold cavity pressure (Kistler) - Quality statistics - Chip card reader - Diagram display and analysis package with 10 diagrams - Trend chart - PV control - Production data interface consisting of 5 volt-free contacts in the control cabinet - 3 freely programmable inputs and outputs in the control cabinet KraussMaffei Linear Robot LRX 350: - Fully integrated control - Horizontal stroke: 4000 mm - Vertical stroke (telescopic): 2000 mm Hjdey Apdqjpfx Alcenl - Demoulding stroke: 1200 mm - Maximum payload: 35 kg

Koşul: ikinci el, Üretim yılı: 2005, Injection moulding machine Manufacturer: Krauss Maffei Model: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mould opening force: 220 kN Moving platen force: open: 105 kN close: 95 kN Mounting plate (H x V): 1,060 x 1,095 mm Clear distance (H x V): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould installation height: 380 mm Opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/back: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Heating zones, cylinder: 6 Dry cycle time: 1,550 1/h Oil capacity: 720 liters Dimensions and weights: Net weight with control cabinet: approx. 16.0 t L/W/H: 6,510 x 2,040 x 2,380 mm Max. mould weight: 4,780 kg Injection unit: Capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight for PS: 953 g Injection flow rate: 527 cm³/s Screw speed standard / option: rpm 285/349 Screw speed standard or stage 1: 95 PS Screw speed option or stage 2: 117 PS Nozzle contact force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated operator panel with TFT color display and 3.5-inch floppy disk drive for data backup Plasticising: 1 complete thermoplastic plasticising unit in wear-resistant design, screw diameter 70 mm with backflow valve and open nozzle Hnjdexu Uvaepfx Alcel Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm

Koşul: ikinci el, Üretim yılı: 2023, çalışma saatleri: 22 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 61035145, sıkıştırma kuvveti: 1.200 kN, vida çapı: 35 mm, silindir hacmi: 393 cm³, enjeksiyon basıncı: 2.429 bar, enjeksiyon ağırlığı: 140 g, kalıp yüksekliği (min.): 200 mm, ejektör kuvveti: 33.000 N, ejektör stroku: 120 mm, açılma hareketi: 950 mm, montaj yüksekliği: 450 mm, toplam uzunluk: 5.650 mm, toplam genişlik: 1.820 mm, toplam yükseklik: 1.950 mm, toplam ağırlık: 6.700 kg, ısıtma kapasitesi: 15,5 kW (21,07 bg), çekiş tipi: Vollelektrisch, açık açıklık: 570 mm, alet ağırlığı: 600.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer, KraussMaffei, we offer you our inspected and flexible stock machines: The precisionMolding base injection moulding machine provides the perfect entry-level solution for all-electric injection moulding to enable fast and innovative responses to market demands. It combines high performance, ease of use, and short delivery times. The machine can be used in a wide range of applications, e.g. in the packaging industry, electrical and electronics industry, medical technology, and the automotive sector. Your benefits: – Optimized price-performance ratio for a broad spectrum of applications – High energy efficiency thanks to the all-electric machine concept – Realization of demanding delivery times with our base machine concept and a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, year 2013) CONTROL SYSTEM • MC P1 with 15" TFT color display and multi-touch functionality CLAMPING UNIT • Clamping force: 1200 kN • Max. mold opening force: 180 kN • Daylight (h x v): 520 x 470 mm • Mounting platen (h x v): 690 x 640 mm • Mold installation height min. - max.: 180 - 450 mm • Opening stroke: 850 mm • Max. mold opening travel: 450 mm • Ejector drive: electric • Ejector stroke: 120 mm • Ejector force fwd/back: 27 / 33 kN • Ejector speed fwd/back: 300 / 300 mm/s • Max. mold weight: 850 kg Hnodpfx Aley Rmwdscjl INJECTION UNIT • Screw diameter / type: 35 mm / standard • Effective L/D ratio: 22.9 • Injection pressure: 2429 bar • Stroke volume: 154 cm³ • Shot weight at max. stroke for PS: 140 g • Injection speed: 200 mm/s • Injection flow: 192 cm³/s • Screw drive / speed: 374 rpm • Plasticizing output (standard screw): 18.9 g/s • Nozzle contact force: 34 kN ELECTRICAL PARAMETERS • Connected load: 22.7 kW • Installed heating capacity: 11.5 kW • Power supply: 200 V / 50 Hz, 3 phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: 6.7 t • Length x Width x Height: 5.18 x 1.76 x 1.90 m ADDITIONAL EQUIPMENT • Low-wear plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • 1-fold air valve (BWAP) • 1-fold pneum. hot runner closure control • 4-fold electrical interface for pneum. cascade • Euromap interface handling: E18 + E67 • Euromap interface (central computer): E67, E77 • 4-fold water manifold • Electrical pre-wiring for hydraulic auxiliary unit • Automatic central lubrication • Adaptive Process Control (APC) • Injection compression moulding circuit • Graphical analysis package • Injection unit swing device The machine is located at our plant in Parsdorf and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.

Koşul: ikinci el, Üretim yılı: 2006, çalışma saatleri: 1.609 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 61008195, sıkıştırma kuvveti: 800 kN, vida çapı: 40 mm, kolonlar arası açıklık: 420 mm, silindir hacmi: 201 cm³, enjeksiyon basıncı: 2.500 bar, enjeksiyon ağırlığı: 183 g, kalıp yüksekliği (min.): 400 mm, ejektör kuvveti: 22.600 N, ejektör stroku: 150 mm, açılma hareketi: 750 mm, toplam uzunluk: 3.960 mm, toplam genişlik: 1.480 mm, toplam yükseklik: 2.020 mm, toplam ağırlık: 3.550 kg, ısıtma kapasitesi: 10,9 kW (14,82 bg), çekiş tipi: Hadraulisch, açık açıklık: 470 mm, alet ağırlığı: 1.000.000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The fully hydraulic CX series provides a particularly compact, efficient, and flexible two-platen machine. The very compact two-platen design with a cantilevered clamp offers generous space for peripheral equipment and optimal accessibility. An efficient and intelligent energy management system with BluePower servo drive further provides a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G01 (Order 38648713) CONTROL SYSTEM - MC 6 with TFT color display and multi-touch functionality CLAMPING UNIT - Clamping force: 800 kN - Maximum die opening force: 55 kN - Clearance between tie bars (h x v): 470 x 420 mm - Mounting platen (h x v): 670 x 670 mm - Mould height min. - max.: [on request] - Maximum opening stroke: 750 mm - Maximum mould opening path: 500 mm - Ejector drive: hydraulic - Ejector stroke: 150 mm - Ejector force forward/back: 23 / 10 kN - Ejector speed forward/back: 760 / 800 mm/s - Maximum mould weight: 1000 kg INJECTION UNIT - Screw diameter / type: 40 mm / standard (customization possible) - Effective L/D ratio: 20 - Injection pressure: 1860 bar - Shot volume: 201 cm³ - Shot weight at max. stroke for PS: 183 g - Injection speed: 100 mm/s - Injection flow: 126 cm³/s - Screw drive / speed: 295 rpm - Plasticizing rate (standard): 12.3 g/s - Nozzle contact force: 50 kN ELECTRICAL PARAMETERS - Connected load: 15.0 kW - Installed heating capacity: 10.9 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral WEIGHT AND DIMENSIONS - Net weight with control cabinet: 3.55 t - Length x Width x Height: 3.96 x 1.48 x 2.02 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for the plasticizing cylinder - Open nozzle - One additional temperature control zone for nozzle heating - Air valve single (BWAP) - Pneumatic control for hot runner shut-off, single - Hydraulic core pull, single (BWAP) - Euromap interfaces for handling: E18, E63 - Euromap interface (central computer): E67, E77 - Adaptive Process Control (APC) - Injection-compression molding function - Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. Hnsdoy Rlmwspfx Alcol We look forward to your inquiry.

Koşul: ikinci el, Üretim yılı: 1999, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 44731, sıkıştırma kuvveti: 500 kN, vida çapı: 25 mm, kolonlar arası açıklık: 320 mm, enjeksiyon ağırlığı: 47 g, kalıp yüksekliği (min.): 200 mm, açılma hareketi: 550 mm, toplam uzunluk: 4.000 mm, toplam genişlik: 1.163 mm, toplam yükseklik: 1.787 mm, toplam ağırlık: 2.300 kg, giriş frekansı: 50 Hz, giriş voltajı: 400 V, giriş akımı: 58 A, Lütfen teklifin durumu ve içeriğini resimlerden ve videodan inceleyiniz. Tesis şu anda demonte durumdadır. Burada sunulan cihaz/sistem test edilmiş, tamamen çalışır durumda ve kullanıma hazırdır. Satış fiyatı KDV dahildir. Düzenli bir fatura alacaksınız. Hjdex Srggspfx Alcjnl Yabancı müşteriler için geçerli bir vergi numarası ile net fatura da düzenlenebilir. Ara satış hakkı saklıdır. Web sitemizi ziyaret edin ve diğer tekliflerimize de göz atın. Belirtilen şirket isimleri ve ticari markalar, sahiplerinin mülkiyetindedir ve yalnızca ürünlerin tanımlanması ve açıklanmasına hizmet etmektedir. Teknik verilerdeki sapmalar ve ürün açıklamasındaki hatalar mümkündür ve bunlarda değişiklik yapma hakkı saklıdır.

Koşul: yeni gibi (kullanılmış), Üretim yılı: 2008, çalışma saatleri: 61.300 h, Fonksiyonellik: tamamen fonksiyonel, sıkıştırma kuvveti: 1.200 kN, vida çapı: 35 mm, kolonlar arası açıklık: 470 mm, basınç: 2.429 bar, Here we offer, as a dealer for injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of injection moulding machines for over 25 years. ++++From pharmaceutical cleanroom production++++ Manufacturer: KraussMaffei Machine type: KM 120-380 EX International designation: 380 EX / 120 Machine no.: 61011287 Year of manufacture: 2008 Operating hours: 61,300 h Control system: MC5 Technical Data – Clamping Unit Hnjdsy D Adtspfx Alcjl Clamping force: 1,200 kN Tie bar spacing (H x V): 470 x 470 mm Platen size (H x V): 780 x 735 mm Min. mould height: 200 mm Max. mould height: 450 mm Max. platen daylight: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Movable platen centering diameter: 160 mm Fixed platen centering diameter: 125 mm Max. mould weight: 1,485 kg Technical Data – Injection Unit Screw diameter: 35 mm Shot volume: 156 cc Injection pressure: 2,429 bar Screw length: 23 L/D Screw speed: 289 rpm Plasticizing rate: 27 g/s PS Free injection rate: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions (L x W x H): 6 m x 1.7 m x 2.19 m Total weight: 9,700 kg Equipment Screen language: German Screen language: English +++Extras+++ Automation: Handling device / removal robot included – Handling: LR 100-2300 Conveying technology: roller conveyor included CE marking: available Full maintenance and acceptance history Complete last test report Incl. conveyor belt incl. safety cage Machine with water battery Machine without material hopper Levelling elements EUROMAP 12 interface Electrics Schuko socket 10A CEE socket 16A Voltage: 400 V Frequency: 50 Hz Motor current: 80 A Warranty Warranty up to initial commissioning Loading / Shipping Free loading onto buyer’s truck or free delivery (ex-works, freight at cost) Available from our warehouse in Hanover, Germany.

Koşul: yeni gibi (kullanılmış), Üretim yılı: 2010, çalışma saatleri: 65.850 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 61013689, sıkıştırma kuvveti: 2.500 kN, vida çapı: 50 mm, kolonlar arası açıklık: 630 mm, silindir hacmi: 432 cm³, enjeksiyon basıncı: 2.304 bar, enjeksiyon ağırlığı: 393 g, Donanım: dokümantasyon / kılavuz, Here we offer the following well-maintained used injection moulding machine as part of our injection moulding machine trade. Of course, we are also interested in purchasing well-maintained, currently available used injection moulding machines, model year 2010 or newer. We have been wholesalers of used injection moulding machines for over 25 years. Current Notice – Tax Information and Advantages for Used Machines From July 1, 2025, used machinery can also benefit from a special annual depreciation of 30%. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as you would for a new machine. Keyword: Growth Booster (§ 7, paragraph 2 EStG-E) Currently in stock and tested at our Hanover warehouse: Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control System: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed materials: PE and PP thermoplastics Extras: - 2 x core pullers (movable WAP, fixed WAP) Hjdpfjxqhuujx Alconl - Pneumatic valve 1 on FWAP - Accumulator for increased injection performance - Fast SK change CX Midrange - Ejection of cooled nozzle plugs - Start handling during mould movement - Start-up circuit - Cycle time analysis - External USB keyboard - Graphical analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve for blowing out at BWAP - 12 temperature control zones - Volt-free contact BDE - Process monitoring - Cycle storage - Trend chart – target/actual graph - PV control - Active backpressure control - Single previous owner – German origin Regular maintenance by manufacturer and previous owner Clamping Unit: Clamping force: 2500 kN / 250 tons Tie-bar spacing: 630 x 630 mm Platen size: 995 x 1050 mm Max opening stroke: 820 mm Min mould height: 330 mm Max daylight: 1150 mm Ejector stroke: 200 mm Ejector force: 57 kN max / 26.3 kN return Injection Unit: Screw diameter: 50 mm Injection volume: 432 cm³ Shot weight: 393 g (PS) Injection pressure: 2304 bar Electrical Equipment: Pump: 45 kW Heater: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation, manual, software included. Available immediately from our Hanover warehouse (Germany) or free delivery within Germany against reimbursement of freight costs. The machine is offered tested and operational. The machine is our sole property. The requested machine is available immediately at our Hanover warehouse, offered tested and operational, and can be inspected under power. To inform you about our machines and our company: - We only sell machines purchased from ongoing production, stored at our Hanover warehouse. - All listed machines are inspected and tested before removal. - We do NOT sell insolvency assets and we are NOT intermediaries trading third-party property. - All machines come from successful companies where regular maintenance and servicing are standard. - All machines are available for inspection at our warehouse.

Koşul: mükemmel (kullanılmış), Üretim yılı: 2014, çalışma saatleri: 47.137 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 61020607, sıkıştırma kuvveti: 1.300 kN, kolonlar arası açıklık: 470 mm, Here we are offering the following well-maintained used injection moulding machine as an injection moulding machinery dealer. Naturally, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been wholesale dealers of used injection moulding machines for over 25 years. Important update – Tax advice and benefit for used machinery: From 01.07.2025, used machines can also benefit from a special depreciation allowance of 30% per year. In addition to the lower price compared to new equipment, you can also claim the same depreciation rates as for new machines. Keyword: Growth booster (§ 7 Abs. 2 EStG-E) Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-colour 2-component machine Control system: MC6 Year of manufacture: 2014 Machine No.: 61020507 Operating hours: 47,137 h Complete maintenance log for the last 7 years / 25,000 operating hours 1st Injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd Injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar distance: 470 x 470 mm Platen size: 745 x 770 mm Max. daylight between platens: 900 mm Min. mould height: 300 mm Ejector stroke: 150 mm / Ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – complete machine specification sheet attached as PDF Nozzle side: Needle shut-off A+C 1x hydraulic core pull 1x pneumatic core pull 1x air blow Ejector side: 1x hydraulic core pull 3x pneumatic core pulls 1x air blow Water circuits: 6 each on nozzle and ejector side Hsdpfjyf Uy Usx Alconl BluePower technology – up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral equipment shown is NOT included in the offer! The machine is available immediately. Free loaded on buyer’s truck or free delivered upon reimbursement of freight costs. For your information regarding the machines we offer and our company: - We only sell machines from our own stock, purchased from ongoing production, directly from our warehouse in Hanover. - All machines offered are checked and tested prior to dismantling. - We do NOT sell insolvency assets and are NOT brokers trading on behalf of third parties. - All machines offered come from successful companies for whom regular maintenance and care are a matter of course. - All machines offered are available for inspection at our warehouse.

Koşul: mükemmel (kullanılmış), Üretim yılı: 2005, Fonksiyonellik: tamamen fonksiyonel, Here we offer a very well-maintained and regularly serviced injection moulding machine. We are also happy to accept well-maintained machines from year 2010 onwards as trade-ins. Please offer us your available machines. Comprehensive servicing by the manufacturer up to present Injection Moulding Machine Krauss Maffei KM65-160 C2 Injection Moulding Machine: Manufacturer / Model: Krauss Maffei KM65-160 C2 Serial No.: 61007063 Year of Manufacture: 2005 Control System: MC4 Comprehensive annual maintenance by the manufacturer Clamping Unit: Clamping Force: 650 kN / 65 tons Tie Bar Distance: 405 x 405 mm Hodpfx Aoh Dp R Eolconl Min. Mould Installation Height: 250 mm Max. Plate Distance: 750 mm Standard Clamping Plates: 610 x 610 mm Ejector Stroke: 150 mm Core Pull: 1x Injection Unit: Injection Unit Size / Cylinder Diameter: 160 / Cylinder Ø25 mm and Cylinder Ø18 mm Max. Shot Weight (Ø25): 47 g/PS Injection Flow: 63 cm³/sec Specific Injection Pressure: max. 2500 bar Handling Interface: Euromap 12 Dosing Interface: Yes Dimensions & Weights: Weight with Control Cabinet: 3.8 t Length: 3,800 mm Width (machine only): 1,050 mm Height: 1,890 mm Oil Capacity: 270 L Location: Hannover / Lower Saxony The machine is in excellent condition and can be inspected under power. Any peripheral equipment shown in the photos is NOT included in the offer! The machine is immediately available from our warehouse. Free loading onto buyer's truck or free delivery subject to freight cost reimbursement. Information about the machines we offer and our company: - We only sell machines acquired from active production directly from our Hannover warehouse. - All machines offered are tested and inspected prior to dismantling. - We do NOT sell insolvency assets and are NOT brokers dealing with third-party property. - All machines offered come from successful companies where regular maintenance and care is a standard practice. - All machines offered can be inspected at our warehouse.

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2011, Fonksiyonellik: tamamen fonksiyonel, sıkıştırma kuvveti: 1.600 kN, vida çapı: 50 mm, silindir hacmi: 393 cm³, Clamping Force: 1600 kN Max. Mold Opening Force: 87 kN Moving Platen Drive Force (Opening): 45 kN Moving Platen Drive Force (Closing): 38 kN Clamping Plate (H x V): 820 x 845 mm Clear Distance (H x V): 520 x 520 mm Mold Opening Stroke: 650 mm Min. Mold Installation Height: 300 mm Max. Opening Width: 950 mm Ejector Stroke: 150 mm Ejector Force (Forward/Return): 23 kN Injection Unit: Screw Diameter: 50 mm L/D Ratio: 20 Injection Pressure: 1892 bar Shot Volume: 393 cc Shot Weight (PS): 358 g Injection Flow: 177 cc/s Screw Speed: 265 rpm Plasticizing Rate: 36.2 g/s Nozzle Contact Force: 50 kN Electrohydraulic Equipment: Rated Pump Motor Power: 22 kW Installed Heating Capacity: 16 kW Cylinder Heater Control Zones: 5 Oil Filling: 489 ltr. Dimensions and Weights: Space Requirement (approx.): 5.50 x 2.00 x 2.20 m Total Weight: 8200 kg Max. Mold Weight: 1862 kg Accessories: - Oscillation Mounts - BluePower - Servo Pump Drive Additional Equipment: - 1 x Air Valve Hedpfjy Nlb Ssx Alcjnl - 8 x Hot Runner Control Zones - 2 x Core Pulls on Moving Side (BWAP) - 2 x Core Pulls on Fixed Side (FWAP) - Robot Interface as per Euromap 67