Kullanılmış Damatomacchine Forum satın al (21.380)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Uygunluk
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Makine üreticisi
- Üretici Z'den A'ya
- Makine üreticisi
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Uygunluk
- Uygunluk
Açık artırma
Biter
d
h
min
s
Açık artırma bitmiş

2.392 km
İsviçre tipi torna tezgahı
CitizenB 16 E6
Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2023, Fonksiyonellik: tamamen fonksiyonel, torna boyu: 135 mm, maksimum mil hızı: 8.000 dev/dak, Çubuk çapı (maks.): 16 mm, karşı milin maksimum devir hızı: 6.000 dev/dak, takım magazinindeki yuva sayısı: 16, The machine is offered with an Iemca Elite 112/32 bar feeder!
TECHNICAL DETAILS
Machining
Main spindle max. bar diameter: 16 mm
Max. machining length without regripping: 135 mm
Main spindle max. drilling diameter: 6 mm
Main spindle max. thread diameter: M6
Sub spindle max. bar diameter: 16 mm
Sub spindle max. drilling diameter: 5 mm
Sub spindle max. thread diameter: M3
Spindles
Main spindle speed: 200–8,000 rpm
Hfjdoxlffyjpfx Ad Ren
Sub spindle speed: 200–6,000 rpm
C-axis indexing (main spindle): 1°
Rapid Traverse
Rapid traverse X, Y: 21 m/min
Rapid traverse Z1, Z2: 15 m/min
Tooling
Driven tool speed: 200–4,500 rpm
Max. number of tool stations: 16
Tool holder size: 10 × 10 mm
MACHINE DETAILS
Drive Power
Main spindle: 3.7 / 2.2 kW
Sub spindle: 1.0 kW
Driven tools: 0.5 kW
Coolant pump: 0.25 kW
Central lubrication pump: 3 W
Electrical Connection
Operating voltage: 200 V
Frequency: 50 Hz
Phases: 3
Main transformer input voltage: 400 V
Main transformer output voltage: 200 V
Connected load: 5.2 kVA
Pneumatic Connection
Compressed air connection: min. 5 bar
Compressed air consumption: 44 NL/min
Machine Data
Dimensions: 1,590 × 837 × 1,761 mm
Spindle height (floor to spindle center): approx. 1,000 mm
Machine weight: 1,150 kg
Control
Control type: Fanuc 0i-TD CNC control
Smallest input increment: 0.001 mm
Smallest output increment: 0.001 mm (Z) / 0.0005 mm (X)
Input options: incremental and absolute
Interface: RS232
Spindle synchronization: main and sub spindle
EQUIPMENT
Work area lighting
Workpiece ejector and part removal device
Coolant tank and central lubrication
Door interlock
Parts catcher and workpiece container
5 turning tool holders 10 × 10 mm
Coolant system with movable jet arms
Power clamping system for main and pick-off spindle
Açık artırma
Biter
d
h
min
s
Açık artırma bitmiş

2.420 km
Lazer kesme makinesi
TrumpfTruLaser Cell 8030
Durumu: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2013, çalışma saatleri: 94.936 h, kontrolör üreticisi: Siemens SINUMERIK 80 D, X ekseni hareket mesafesi: 3.000 mm, Y ekseni hareket mesafesi: 1.300 mm, Z ekseni hareket mesafesi: 600 mm, X ekseni ilerleme hızı: 100 m/dak, TECHNICAL DETAILS
Working Area
X axis: 3,000 mm
Y axis: 1,300 mm
Z axis: 600 mm
B axis: ±135°
C axis: n × 360°
Speeds
X / Y / Z axis: 100 m/min
B / C axis: 540 °/s
Acceleration
Simultaneous: 17.3 m/s²
X / Y / Z axis: 10 m/s²
B / C axis: 200 | 100 rad/s²
Maximum Positioning Accuracy
Linear axes X / Y / Z: 0.03 mm
Rotary axes B / C: 0.005°
Maximum Positioning Deviation
Linear axes X / Y / Z: 0.08 mm
Rotary axes B / C: 0.015°
MACHINE DETAILS
Laser type: Solid-state laser TruDisk 3001
Hfjdpfxsxlctzj Ad Rjn
Laser power: 3,000 W
Cutting gas: Nitrogen
Control: Siemens SINUMERIK 80 D
Operating Hours
"Laser On" hours: 94,936 h
Total operating hours: 99,293 h
EQUIPMENT
Magnetic coupling
Dynamic cutting optics with f = 150 mm
FocusLine
FastLine Cell
ObserveLine
Rotary changer D = 4,000 mm including rear protection
Scrap conveyor belt
4× configurable control interfaces
Valve terminal for 8 pneumatic clamps per side
2× loading status lights for rotary changer
Extended compressed air supply on device panel including vacuum ejectors
Cutting gas compressed air
Renishaw measuring probe
Measuring head (without probe)
Measuring data processing
3× horizontal fixture interfaces
Extraction piping
Protective cabin for rotary changer including safety device, 1 window and column for operator panel
Status beacon at the top & bottom
Video monitoring with camera
Monitor mount
Special installation
Chiller unit KLH
Açık artırma
Biter
d
h
min
s
Açık artırma bitmiş

3.062 km
Kenar bantlama makinesi
HOMAGKAL 210 AMBITION 2264
Durumu: mükemmel (kullanılmış), Üretim yılı: 2010, Fonksiyonellik: tamamen fonksiyonel, iş parçası yüksekliği (maks.): 60 mm, kenar kalınlığı (maks.): 20 mm, iş parçası genişliği (maks.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation!
TECHNICAL DETAILS
Glued edge thickness: max. 20 mm
Maximum gluing height: 60 mm
Maximum roll material thickness: 3 mm
Piece width: min. 60 mm
Maximum feed speed: up to 25 m/min
Feed: continuous
Electric height adjustment: available
Pressure: top belt pressure
Preheating zone: available
Granulate glue system: with prefabricated container
Glue pot: interchangeable/variable
Spraying device: available
Pre-milling unit: available
Trimming unit: with 2 motors
Milling stations: flush/radial/chamfered, 1 available
Corner copying unit: with 2 motors
Edge scraper: profile and planer
Polishing unit: available
Strip magazine: available
Units: synchronized units with NC axis/axes
Machine version: left side
Quick-change units: available
Hfodpoxg Ix Sjfx Ad Ron
MACHINE DETAILS
Remote control: PowerControl PC 22
Weight: 5,000 kg
Machine length: 7,845 mm
Standards: CE regulations
EQUIPMENT
- Special equipment: with nesting
- new chains
- HOMAG feed device with 2 rollers
- HOMAG A 20 glue application unit
- HOMAG HL 84
- HOMAG FK 11
- HOMAG PN 10 profile scraper
- HOMAG FA 11 finishing unit

Şimdi bilgi alın
+44 20 806 810 84
+44 20 806 810 84
Şimdi ilan ver
*ilan başına/ay
Açık artırma
Biter
d
h
min
s
Açık artırma bitmiş

2.326 km
CNC torna freze merkezi
Mori SeikiZT 1500 Y
Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2005, çalışma saatleri: 5.000 h, Fonksiyonellik: tamamen fonksiyonel, torna boyu: 750 mm, arabada tur dönme çapı: 250 mm, X ekseni hareket mesafesi: 140 mm, Y ekseni hareket mesafesi: 40 mm, Z ekseni hareket mesafesi: 410 mm, TECHNICAL DETAILS
X-axis travel: 140 mm
Y-axis travel: +/- 40 mm
Z-axis travel (1+2): 450 / 410 mm
Turning length: 750 mm
Turning diameter over cross-slide: 250 mm
Turning diameter: 190 mm
Distance between centers: 750 mm
Max. bar diameter: 52 mm
Spindle speed (max.): 4,000 rpm
Spindle bore: 91 mm
Hedpfexgglkox Ad Rofn
Spindle bearing diameter: 95 mm
Main spindle speed range: 60 - 6,000 rpm
Drive power - main spindle: 22 / 18.5 kW
Max. torque: 198 Nm
Counter-spindle travel B: 525 mm
Feeds
Feed rate X (1+2): 18,000 mm/min
Feed rate Y: 6,000 mm/min
Feed rate Z (1+2): 24,000 mm/min
Feed rate B: 24,000 mm/min
Number of turrets: 2
Number of tool stations: 2 x 16 positions
Shank height for square tool: 20 mm
Drill shank diameter: 25 mm
Turret indexing time: 0.2 s
Tool holder: VDI 30
Speed range - driven tool stations (max.): 6,000 rpm
Drive power - driven tool stations: 5.5 / 3.7 / 2.2 kW
Rapid traverse X (1+2): 18 m/min
Rapid traverse Y: 6 m/min
Rapid traverse Z (1+2): 24 m/min
Rapid traverse B: 24 m/min
Rapid traverse C: 400 rpm
MACHINE DETAILS
Control: MSX 501
Dimensions & Weight
Dimensions: 6,500 x 3,000 x 2,500 mm
Machine weight: approx. 5.1 t
Total power requirement: 73.9 kVA
Operating hours: 5,000 h
EQUIPMENT
LNS bar feeder
Açık artırma
Biter
d
h
min
s
Açık artırma bitmiş

1.630 km
Hidrolik baskı
HYDRAPHPSZb-160
Durumu: işlem için hazır (kullanılmış), Üretim yılı: 1991, çalışma saatleri: 20.242 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 6538, presleme kuvveti: 163 t, toplam ağırlık: 25.000 kg, geri çekme kuvveti: 22 t, strok boyu: 500 mm, tahrik tipi: hidrolik, TECHNICAL DETAILS
Ram
Press force: 1,600 kN
Return force: 220 kN
Stroke: 500 mm
Drive power: 37 kW
Drawing Device
Drawing force: 400 kN
Stroke: 100 mm
Ejector in Ram
Ejector force: 50 kN
Stroke: 50 mm
MACHINE DETAILS
Weight: 25,000 kg
Electrical Data
Pump unit ram + drawing cushion
Rated power: 37 kW
Rated current: 72/66 A
Voltage: 660/380 V
Frequency: 50 Hz
Protection class: IP 54
Pump unit control circuit + ejector
Rated power: 7.5/15.5 kW
Rated current: 15.5/26.5 A
Voltage: 660/380 V
Frequency: 50 Hz
Protection class: IP 54
Cooling-filter circuit
Rated power: 2.2 kW
Rated current: 5 A
Voltage: 380/220 V
Frequency: 50 Hz
Protection class: IP 54
Oil cooler
Hjdexgt Tzepfx Ad Rsfn
Rated power: 0.37 kW
Rated current: 1.2 A
Voltage: 380/220 V
Frequency: 50 Hz
Protection class: IP 54
Tool clamping
Rated power: 0.55 kW
Rated current: 2.6 A
Voltage: 380/220 V
Frequency: 50 Hz
Protection class: IP 54
Stop spindle
Rated power: 0.75 kW
Rated current: 2.3 A
Voltage: 380/220 V
Frequency: 50 Hz
Protection class: IP 54
Oil circulation lubrication
Rated power: 0.3 kW
Rated current: 1.3 A
Voltage: 380/220 V
Frequency: 50 Hz
Protection class: IP 54
Operating hours: 20,242 h
EQUIPMENT
Decoiler (year of manufacture: 1999)
Straightening machine (year of manufacture: 1999)
Feeder unit (year of manufacture: 2004)
Tool breakage monitoring system
Note: A prior inspection of the machine is strongly recommended by the seller, as the press cannot be removed from the hall in its installed condition. The seller can possibly recommend a specialist company for relocating the machine.
Daha fazla ikinci el makine keşfedin
Açık artırma
Biter
d
h
min
s
Açık artırma bitmiş

3.244 km
Lazer kesme makinesi
BystronicByStar Fiber 3015
Durumu: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2023, çalışma saatleri: 1.990 h, lazer gücü: 12.000 W, maks. sac kalınlığı çelik: 30 mm, X ekseni hareket mesafesi: 3.100 mm, Y ekseni hareket mesafesi: 1.580 mm, Z ekseni hareket mesafesi: 100 mm, Bystronic ByStar Fiber 3015 Dynamic Edition F12000 from year of manufacture 2023 with only 1,990 cutting hours!
Original price of the machine was approximately GBP 767,000!
TECHNICAL DETAILS
Travel distances
X-axis travel: 3,100 mm
Y-axis travel: 1,580 mm
Z-axis travel: 100 mm
Maximum cuttable sheet thicknesses
Steel: 30 mm
Stainless steel: 30 mm
Aluminum: 30 mm
Brass: 15 mm
Copper: 12 mm
Positioning speed
Maximum positioning speed parallel to X/Y axis: 120 m/min
Maximum simultaneous positioning speed: 170 m/min
Positioning accuracy
Bilateral repeatability of axis positioning R: 0.025 mm
Average bilateral positional deviation of an axis M: 0.05 mm
Edge detection accuracy: ± 0.5 mm
Workpiece weight
Maximum workpiece weight: 1,100 kg
Maximum workpiece weight on both shuttle tables: 1,850 kg
Changing time
Shuttle table change time: 25 s
MACHINE DETAILS
Dimensions & weight
Dimensions (L x W x H): 12,150 x 6,000 x 3,200 mm
Machine weight: 11,000 kg
Laser source
Laser source: Fiber 12000
Power: 12,000 W
Adjustment range: 1,200–12,000 W
Wavelength: fiber
Consumption
Hedexlcz Ejpfx Ad Rjfn
Total power consumption (incl. exhaust, cooler): 27 kW
Operating hours
Cutting hours: 1,990 h
On-time hours: 13,428 h
EQUIPMENT
Detection Eye
BeamShaper
NCT & KerfScan
2nd high-pressure cutting gas channel
Preparation for N2 generator
Dust extraction system for internal installation
Electrical cabinet position: top (mezzanine structure not included)
Note: The machine has already been dismantled, stored, and is no longer connected to power.
Açık artırma
Biter
d
h
min
s
Açık artırma bitmiş

2.685 km
CNC işleme merkezi
MorbidelliM 100
Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2019, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: AA100001570, Z ekseni hareket mesafesi: 180 mm, masa genişliği: 1.620 mm, masa uzunluğu: 5.510 mm, hızlı travers X ekseni: 56 m/dak, hızlı tablası Y ekseni: 56 m/dak, TECHNICAL DETAILS
Working table dimensions (L x W): 5,510 x 1,620 mm
Z-axis travel: 180 mm
Maximum vectorial rapid traverse speed (X/Y axis): 56 m/min
Spindle rotation speed: 4,000 rpm
Tool changer positions: 44
Connection diameter: 250 mm
MACHINE DETAILS
Dimensions & Weight
Dimensions: 9,700 x 5,020 x 2,650 mm (LxWxH)
Net weight: 5,000 kg
Spindle drive power: 5.5 kW
Air consumption: 4,430 m³/h
Air velocity: 25 m/s
Voltage: 400 V / 50 Hz
EQUIPMENT
PRO-Speed safety system
TEPCAD operator panel with touchscreen color display
Linear tool changer TBR14
Linear tool changer FAST14
Air blower on electrospindle
Protective grid for XY axes
Vacuum pump 150/300 m³/h
5-axis unit 'JQX' version 13.5 kW
Fixed base: 145 x 145 H=75 mm
Rotating gondola: 145 x 55 H=75 mm
Clamp for 8 rails TV FLEX / TV FLEXDRIVE / TV FLEXMATIC
MULTIGRIP 90 round clamp (H83) for TV FLEX / TV FLEXMATIC
Maestro connect 1 year (including gateway kit plug & play)
Hsdpjxmgr Rjfx Ad Refn
SCM DIGITAL SOLUTIONS: MAESTRO CONNECT
MAESTRO ACTIVE software for the human-machine interface (HMI)
Maestro software for CNC programming
Hardware dongle for Maestro CNC
Advanced Maestro 3D module
Additional key for Maestro CNC (USB port)
Windows 10 embedded 64-bit operating system
Console with integrated PC eye-M PRO
Açık artırma
Biter
d
h
min
s
Açık artırma bitmiş

2.509 km
Multispindle
GildemeisterGM 42-6
Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2007, çalışma saatleri: 57.860 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 4903-0261, Submitting a bid obligates you to collect the item by the deadline of 15/11/2025!
The following machines are also being sold exclusively via auction from the same location:
Gildemeister GM 42-6, year 2005: Listing ID A20302860
Gildemeister GM 42-6, year 2004: Listing ID A20303020
Gildemeister GM 42-6, year 2011: Listing ID A20303110
Gildemeister GM 42-6, year 2007: Listing ID A20303190
Gildemeister GM 42-6, year 2005: Listing ID A20303220
TECHNICAL DETAILS
Maximum turning diameter: 42 mm
Main spindle speed: 500–2,700 rpm
Number of spindles: 6
Number of side slides (cross slides): 4
Number of tool spindles: 6
Number of tool positions: 12
Max. bar diameter for round stock: 42 mm
Max. bar across flats for hexagonal stock: 36 mm
Max. bar size for square stock: 29 mm
Max. bar stroke at one station: 130 mm
Max. bar stroke at two stations: 260 mm
Max. stroke, radial slide: 52 mm
Adjustment, radial slide, forward/backward: ±20 mm
Max. stroke, axial slide: 72 mm
Max. rapid traverse speed: 9.6 m/min
Max. tool spindle stroke: 120 mm
Adjustment, forward/backward: 10 mm
Hfjdpfx Adoxnxqbo Rsn
MACHINE DETAILS
Dimensions & Weight
Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm
Dimensions (L × W × H, with bar loader): 6,035 × 1,680 × 2,050 mm
Weight: 9,800 kg
Weight with bar loader: 10,000 kg
Main drive motor
Rated power, main motor: 22 kW
Main motor speed: 1,455 rpm
Coolant tank capacity: 750 L
Operating hours: 57,860 h
EQUIPMENT
Bar feeder (length: approx. 3,000 mm)
Work tables
Additional accessories
Açık artırma
Biter
d
h
min
s
Açık artırma bitmiş

2.579 km
Mobil parçalama tesisi
DoppstadtInventhor 6
Durumu: mükemmel (kullanılmış), Üretim yılı: 2023, çalışma saatleri: 119 h, Fonksiyonellik: tamamen fonksiyonel, konveyör bant uzunluğu: 7.000 mm, konveyör bant hızı: 50 mm/s, konveyör bant genişliği: 1.000 mm, dolum açıklığı genişliği: 3.374 mm, Doppstadt Inventhor 6 with only 119 operating hours!
TECHNICAL DETAILS
Shredding System:
Type: Size L
Number of Roller Teeth: 20
Feed Hopper:
Loading Height: 3,650 mm
Feed Width: 3,374 mm
Discharge Conveyor (Rear Belt):
Width: 1,000 mm
Length: 7,000 mm
Discharge Height: 4,209 mm
Conveying Speed: 1.25 – 3.0 m/s
MACHINE DETAILS
Transport Dimensions (L x W x H): 9,141 mm x 2,540 mm x 3,604 mm
Permissible Total Weight: 25,000 kg
Hedsxln Rlepfx Ad Rsfn
Drive:
Engine Type: Diesel-hydraulic
Make: MTU 6R1000
Rated Power: 260 kW (353 hp)
Emission Standard: STAGE V
Fuel Tank Capacity: 500 l
Operating Hours: 119 h
EQUIPMENT
Base Package Inventhor Type 6
Load-sensing system
Longitudinal Conveyor (Belt Length: 2,900 mm, Belt Width: 800 mm)
Centrally Positioned Lubricating Strips
24V Electric Control System
Complete Radio Remote Control
Large Side GRP Service Doors
Service-Friendly Engine Compartment
LED Lighting Kit (Engine Compartment and Rear)
Hydraulically Reversible Fan
Three-Sided Loading Protection
Folding Hopper
Fire Extinguisher
Maintenance Ladder
Toolbox
Acoustic Start-Up Warning
Doppstadt Telematic System
Size L Limiter
Additional Hydraulic Connection 35 – 80 l/min
Hydrostatic Drive
Hopper Extension 350 mm, Dual-Sided Watering
Overbelt Magnet Neodymium
Mounting Frame for Overbelt Magnet 7 m
Açık artırma
Biter
d
h
min
s
Açık artırma bitmiş

2.582 km
Dikey işleme merkezi
MazakVariaxis 500-5X
Durumu: incelemesiz (kullanılmış), Üretim yılı: 2004, Fonksiyonellik: denenmemiş, X ekseni hareket mesafesi: 510 mm, Y ekseni hareket mesafesi: 510 mm, Z ekseni hareket mesafesi: 460 mm, iş parçası çapı (maks.): 500 mm, dönüş hızı (maks.): 12.000 dev/dak, No reserve price – guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Travel ranges
X-axis: 510 mm
Y-axis: 510 mm
Z-axis: 460 mm
Workpiece dimensions
Maximum diameter: 500 mm
Maximum height: 405 mm
Table
Number of tables: 1
Table diameter: 500 mm
Table width: 400 mm
Maximum load capacity per table: 300 kg
Number of T-slots: 5
T-slot width: 80 mm
Reference slot: 50 mm
Table height: 800 mm
Distance spindle nose – table, max.: 650 mm
Distance spindle nose – table, min.: 190 mm
Distance spindle nose – table center, max.: 600 mm
Distance spindle nose – table center, min.: 140 mm
Speeds
Rapid traverse X-axis (max.): 50 m/min
Rapid traverse Y-axis (max.): 50 m/min
Rapid traverse Z-axis (max.): 50 m/min
Feed rate X-axis (max.): 50 m/min
Feed rate Y-axis (max.): 50 m/min
Feed rate Z-axis (max.): 50 m/min
Spindle
Maximum speed: 12,000 rpm
Minimum speed: 35 rpm
Spindle motor (15 min): 22 kW
Spindle motor (continuous operation): 15.0 kW
Maximum tool diameter with adjacent tool: 80 mm
Maximum tool diameter without adjacent tool: 125 mm
Maximum tool length: 300 mm
Tool change time (C/C): 4.5 s
MACHINE DETAILS
Electrical supply
Power (30 min): 66.6 kVA
Hfodpoxldrxofx Ad Ren
Power (continuous operation): 49.9 kVA
Compressed air supply
Pressure: 500 kPa
Flow rate: 200 l/min
Cooling system
Total tank volume: 300 l
Dimensions & weight
Dimensions (L x W x H): 3,015 x 2,805 x 2,964 mm
Weight: 7,600 kg
EQUIPMENT
Operator door interlock with switch
Full enclosure
Top cover
Transformer for Europe (CE)
Ballscrew cooling (X, Y, Z)
Automatic tool setter & Mazatrol PC-FUSION CNC 640M 5X control
Additional variables (600)
Mazak Tornado tapping-drilling Mazatrol
Mazak Tornado tapping-drilling (EIA)
Intersection calculation between 2 lines
Zero-point offset
Inverse command execution
G37 automatic tool length measurement
Sequence comparison function
RS-232C interface
High-speed software Mazacc 2D
Additional coordinate system (G54.1)
Thread cutting function
Machining navigation – prediction
Machining navigation – monitoring
Machining navigation – results
PCMCIA interface (2 slots)
IC memory card interface
Complete coolant system
Lighting
Manuals
Note: The machine has not been used for 2 years but was operating reliably prior to that. Pallets are included in the sale and delivery. Tools and tool holders are not included in the sale and delivery.
Açık artırma
Biter
d
h
min
s
Açık artırma bitmiş

3.030 km
3D yazıcı
MarkforgedMetal X + Sinter- und Wascheinheit
Durumu: yeni gibi (sergi parçası), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 523afbb3, Üretim yılı: 2019, iş parçası ağırlığı (maks.): 10 kg, iş parçası uzunluğu (maks.): 250 mm, iş parçası genişliği (maks.): 183 mm, iş parçası yüksekliği (maks.): 150 mm, No reserve price – guaranteed sale to the highest bidder!
By placing a bid, you commit to timely collection by 20/12/2025!
This auction is for a complete solution consisting of printer, washing unit, and sintering unit! The machine is a demonstration unit and has seen very little use.
TECHNICAL DETAILS
Hfsdpfxexnp Hae Ad Ren
Printing process: Atomic Diffusion Additive Manufacturing (ADAM)
Build volume: 300 x 220 x 180 mm
Layer thickness: 50 µm - 200 µm
Max. part size: 250 x 183 x 150 mm
Max. part weight: 10 kg
Sintering capacity: 3,020 cm³
Sintered area: 348 cm²
Sintering time: 26 hours
Max. temperature: 1,300 °C
Washing capacity: 18,356 cm³
Washing volume: 356 x 254 x 203 mm
Basket: Stainless steel wash basket
Fluid: Opteon SF79, Opteon SF80, Tergo Metal Cleaning Fluid
MACHINE DETAILS
Printer dimensions
Dimensions: 575 x 467 x 1,120 mm
Weight: 75 kg
Washing unit dimensions
Dimensions: 609 x 685 x 1,067 mm
Weight: 136 kg
Sintering unit dimensions
Dimensions: 1,270 x 510 x 720 mm
Weight: 136 kg
Input voltage: 240 V
Input current: 6 A
Input frequency: 60 Hz
FEATURES
Dual-nozzle print system
Heated print chamber
Vacuum-sealed print bed (new vacuum pump and vacuum silencer installed 2022)
Automatic bed leveling
Açık artırma
Biter
d
h
min
s
Açık artırma bitmiş

2.271 km
Paletli ekskavatör
SanySY 265C
Durumu: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2018, koparma kuvveti: 187 kN, zincir genişliği: 600 mm, Donanım: gripper hidrolik sistemi, hidrolik çekiç, TECHNICAL DETAILS
Boom: 5,900 mm
Stick: 2,950 mm
Engine power: 144 kW
Bucket breakout force: 187 kN
Stick tear-out force: 130 kN
Steel track width: 600 mm
Hfsdpfx Asxmgnlsd Ron
MACHINE DETAILS
Fuel type: Diesel
Engine: Cummins, Stage IV
Engine output: approx. 194 hp
Torque: 809 Nm
Displacement: 6,700 cc
Dimensions & Weight
Dimensions (L x H x W): 10,290 x 3,225 x 2,990 mm
Operating weight: 27,500 kg
Operating hours: approx. 1,600 h
EQUIPMENT
Grab hydraulics
Hammer hydraulics
Load sensing hydraulics
Cabin with ROPS
Air conditioning
Safety certification (UVV)
Additional work lights
Proportional auxiliary control circuit for grab/hammer on joystick 1
Non-proportional auxiliary control circuit for GRL on joystick 2
Safety load holding valves for stick and boom with overload indicator
Double-acting quick coupler hydraulic circuit
Swing brake
2 travel speeds
Travel alarm and rotating beacon
Emergency engine stop switch
3x LED work lights on roof (2x front, 1x rear)
1x LED work light on boom
1x LED work light on toolbox
12V socket
Document compartment
Radio with speaker
Automatic climate control
Tiltable front window
8x auxiliary circuit flow rates adjustable via on-board computer with multifunction monitor
Floor mat
Cup holder
Air-suspended fabric seat with seat heating
Refueling pump
küçük ilan

263 km
Asfalt karıştırma tesisi
PolygonmachPBA-160 batch type stationary asphalt plant
Ara
Durumu: yeni, Unladen weight: 120,000 kg
Cargo compartment volume: 160,000 l
STANDARD CONDITIONS
The plant is designed for the production of 160 t/h of road mix with a finished product at an initial moisture content of 4% and 160°C under the following standard conditions:
• Aggregate temperature at dryer inlet: 10°C.
• Sea level altitude
• Average density of the feed aggregates: 1,650 kg/m³
• Heavy fuel oil No. 6 calorific value ≥ 9,200 kCal/kg
• Heavy fuel oil No. 4 calorific value ≥ 9,700 kCal/kg
• Calorific value for diesel oil ≥ 10,200 kCal/kg
• Natural gas calorific value ≥ 7,600 kCal/kg
• Temperature rise of hot aggregates: 160 K
• Residual moisture content in mix: 0.3%
• Max. aggregate size: 40 mm
• Material pass-through sieve 3 mm: 35%
• Material is non-porous and non-hygroscopic with regular shape
• Production tolerance rate as per environmental and parameter conditions: ±4%
COLD AGGREGATE BUNKERS
• Four cold aggregate hoppers made of 5 mm St 37-grade steel plate are required, each approximately 20 m³ in size and manufactured separately.
• The hoppers must be fitted with 800 mm upper extensions made from 6 mm steel to prevent overflow of material.
• Discharge of material from the hoppers must be achieved with a moving feeder assembly.
• Material flow from each hopper must be optionally frequency-controlled (speed-controlled) and adjustable via the computer screen.
• The discharge rate of each hopper can be set via manual gate levers, which must be available on every hopper.
• A warning system must be present if the aggregate in the hopper runs out, with a warning sign displayed on the operator screen.
• A vibrator motor, controlled from the operator screen, must be installed to facilitate material flow and prevent blockages in hoppers containing fine materials.
• A conveyor belt system must be installed beneath each hopper to ensure safe material transfer.
• Each hopper must be equipped with modular grids made from 10x50 plates with a 10 mm bar diameter.
• Silo loading width must be 3000x2400 mm.
• An emergency pull-cord shutdown system must be in place.
• Possible malfunctions of the belts must be displayed on the operator screen.
Hsdpfx Aow Hzk Dsd Rsfn
2. SUB-HOPPER COLD AGGREGATE COLLECTOR BELT
• The horizontal belt must transfer material taken separately from each hopper in a controlled fashion to the inclined dryer feed belt, and be capable of supplying material to a plant with a capacity of 160 t/h.
• The rubber belt must be 10 mm thick, 800 mm wide, 4-ply EP 125-grade fabric.
• The belt's start/stop operation must be controllable via the operator screen. To empty hoppers at season’s end, the belt must be capable of reverse operation independently of the other units.
• The horizontal conveyor frame must be constructed from structural steel, ensuring smooth operation and including a belt tensioning system.
• The belt must be equipped with a stripping system at both ends.
• The drive drum must be rubber-coated and have a 1-degree angle.
• For emergencies...
Açık artırma
Biter
d
h
min
s
Açık artırma bitmiş

2.509 km
Multispindle
GildemeisterGM 42-6
Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2005, çalışma saatleri: 68.410 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 4903-0234, milling sayısı: 6, maksimum mil hızı: 2.700 dev/dak, Çubuk çapı (maks.): 42 mm, torna çapı: 42 mm, Donanım: bar besleyici, The submission of a bid obligates the successful bidder to collect the machine(s) by the specified deadline of 15.11.2025!
The following machines are also being sold exclusively by auction from the same location:
Gildemeister GM 42-6, year 2005: Listing ID A20302860
Gildemeister GM 42-6, year 2004: Listing ID A20303020
Gildemeister GM 42-6, year 2011: Listing ID A20303110
Gildemeister GM 42-6, year 2007: Listing ID A20303190
Gildemeister GM 42-6, year 2007: Listing ID A20303265
TECHNICAL DETAILS
Maximum turning diameter: 42 mm
Main spindle speed: 500–2,700 rpm
Number of spindles: 6
Number of side slides (cross slides): 4
Number of tool spindles: 6
Number of tool positions: 12
Max. bar diameter for round material: 42 mm
Max. bar width across flats for hexagonal material: 36 mm
Max. bar side length for square material: 29 mm
Max. bar stroke in one station: 130 mm
Max. bar stroke in two stations: 260 mm
Max. radial slide stroke: 52 mm
Radial slide adjustment, forward/backward: ±20 mm
Max. axial slide stroke: 72 mm
Max. rapid traverse speed: 9.6 m/min
Max. tool spindle stroke: 120 mm
Adjustment, forward/backward: 10 mm
MACHINE DETAILS
Dimensions & Weight
Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm
Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm
Hfsdoxnxnyjpfx Ad Rsn
Weight: 9,800 kg
Weight with bar feeder: 10,000 kg
Main drive
Rated power of main drive: 22 kW
Main drive speed: 1,455 rpm
Coolant tank volume: 750 L
Operating hours: 68,410 h
EQUIPMENT
Bar magazine (length: approx. 3,000 mm)
Work tables
Additional accessories
küçük ilan

251 km
Ağır hizmet kova
Caterpillar950 Heavy Duty Bucket
Ara
Durumu: yeni, Üretim yılı: 2023, CAT950 Heavy Duty Bucket
Hfedpfjqa Daxjx Ad Rjn
For detailed information and quote, please contact us
küçük ilan

266 km
Balya presi (tarım)
KOMSİLAJ MAKİNAKM X1000-1200+60 BALER WRAPPER COMB.
Ara
Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2023, çalışma saatleri: 160 h, balya yüksekliği: 1.200 mm, balya uzunluğu: 1.200 mm, balyanın ağırlığı: 1.200 kg, balya genişliği: 1.200 mm, azami hız: 80 km/s, renk: mavi, boş ağırlık: 14.500 kg, yükleme alanı hacmi: 1,4 m³, ilk tescil: 02/2024, toplam yükseklik: 4.000 mm, toplam uzunluk: 14.000 mm, toplam genişlik: 3.500 mm, makine/araç numarası: 1132, Donanım: aydınlatma, ek farlar, 2023 KOMSILAJ KM X1000-1200+60 Combined Baler and Wrapper Machine
-Fully automatic system
-Free installation and professional technical support
-Ready for immediate shipment
🔧 Key Technical Specifications
Fully automatic control: Maximum efficiency with minimal labor
Production speed: 1 bale per minute
Bale dimensions: 1200 x 1200 mm
Maximum bale weight: Up to 1200 kg (depending on material density)
Special cast bearing housings: High durability and long service life
Hydraulic film wrapping system
Hydraulic net or film wrapping system(dual system): Flexibility for different product types
Shock-absorbed conveyor system: Reduces tension and prevents chain breakage
Automatic chain lubrication system
Automatic grease lubrication system
Smart touchscreen with advanced software
4 onboard cameras – live monitoring via the control panel
Machine Background:
Hfodjwlhztepfx Ad Ren
The machine was originally purchased for a short-term sugar factory contract. After approx. 6,000 bales were produced, the project ended and no further use was made.
The owner is a contractor, not a farmer, and is now offering the machine for sale in excellent condition.
🌍 Komsilaj Quality – 40 Years of Experience
Manufacturer: Komsilaj – A leading agricultural machinery company from Türkiye with 40 years of experience
KOMSILAJ machines are in operation in more than 60 countries around the world — from Japan to Ecuador.
Branches in Germany and Algeria
Authorized dealers in Brazil, India,Pakistan,Iraq and İran.
Suitable for packaging over 20 types of agricultural products and various types of industrial waste
As both a producer and active operator, KOMSILAJ continuously improves its machines based on real field use and customer feedback.
All machines are CE/İSO/TSE certified, reliable, and built for intensive professional use.
küçük ilan

238 km
Rulo Konveyörlü Kumlama Makinesi
CETINGILSK NEW
Ara
Üretim yılı: 2025, Durumu: yeni, Roller Conveyor Shotblasting Machine
Sheet, Profile and Finished Metal Product Blasting Machine: It consists of Cabin, Turbine System, Conveyor System, Recycling System, Filtration System, Control Panel and Platform.
Roller Conveyor Blasting Machines consist of Metal Sheet Shot Blasting Machines, Profile Shot Blasting Machines.
Material is sent to the cabin on specially manufactured roller conveyor. The surface cleaned material is ready for the next process (painting, coating, etc.) at the cabin exit.
Hsdevnrr Aspfx Ad Rofn
It is used in sheet, NPI, NPU, Profile blasting processes.
Ideal for rusting, roughening and cleaning before painting.
The cabin is made of ST-37 sheet metal and blasting zone is supported by manganese wear plates. Hardox sheets has been added to the parts of the leggings that are close to the blasting zone.
The wear plates cladding is screw-in design for future wear-based replacements.
The side wear plate, top wear plate, front and rear wear plates, blades, impeller, control cage, steel shot feeding elbow of the turbines on the machine are made of Ni-Hard cast iron chemical composition.
CODE W x H(mm) TURBINE
SK - 1 1.000 x 500 4 x Ø 300
SK - 2 1.500 x 500 6 x Ø 300
SK - 3 1.500 x 1000 6 x Ø 400
SK - 4 2.000 x 500 8 x Ø 400
SK - 5 2.000 x 1000 8 x Ø 400
SK - 6 2.000 x 1.500 10 x Ø 400
SK - 7 2.500 x 1.000 12 x Ø 400
SK - 8 3.000 x 1000 16 x Ø 400
SK - 9 3.000 x 1.500 16 x Ø 400
SK - 10 4.000 x 2000 22 x Ø 400
Açık artırma
Biter
d
h
min
s
Açık artırma bitmiş

2.271 km
Paletli ekskavatör
SanySY 215C
Durumu: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2019, çalışma saatleri: 1.510 h, Donanım: gripper hidrolik sistemi, hidrolik çekiç, kabin, klima, TECHNICAL DETAILS
Power: 129 kW
Power: 175.39 HP
MACHINE DETAILS
Total weight: 23,500 kg
Operating weight: 23,500 kg
Operating hours: 1,510 h
EQUIPMENT
Grapple hydraulics
Breaker hydraulics
Hydraulics
Cab
Air conditioning
UVV (accident prevention regulations)
Additional work lights
Demolition guards for roof and windshield
Bekamax central lubrication system
New main control valve
Heating
Automatic climate control
Radio with speakers
Adjustable armrests
12 V socket
USB port (music)
Air-suspended seat
Heated seat
Windscreen wiper
Additional hydraulic circuit 1 on joystick
Additional hydraulic circuit 2 on joystick
Tiltable roof window
Integrated cool box
10" touch display
Battery master switch
Travel alarm
Rotating beacon
Camera (rear + right)
Handrails
Lockable hoods
Lockable fuel cap
Safety valves on boom and stick
Double-acting hydraulic circuit for quick coupler including piping
Crusher and shear circuit proportionally operated via joystick including piping
Rotation circuit proportionally operated via joystick including piping
Adjustable oil flow rate for attachments
Adjustable oil pressure for attachments
LED work lights roof front
LED work lights boom
LED work lights platform
LED work lights roof rear
Steel tracks 600 mm
Lashing eyes
Automatic engine speed control
Refueling pump
SCR
DPF
DOC
Swing brake
2 travel speeds
Piping for additional hydraulic circuit 1
Piping for additional hydraulic circuit 2
Hjdpfexmgfwex Ad Rjfn
Main filter
Hydraulic pilot control for joysticks
Refueling pump
küçük ilan

263 km
Asfalt karıştırma tesisi
PolygonmachPBA200 200 tph asphalt plant, enrobage, asfalto
Ara
Durumu: yeni, Unladen weight: 240,000 kg
Cargo area capacity: 3,000,000 l
FULLY AUTOMATIC ASPHALT PLANT
1.1 AGGREGATE BUNKERS (6 x 12 m³) 6 pcs
1.2 Bunker and dosing belts 1+1 feed
1.3 Distributor and dryer mounted on conveyor belt 1 pc
1.4 STATIONARY CHASSIS 1 pc
1.5 ROTARY DRYER UNIT 1 pc
1.6 Dryer drum 1 pc
1.7 Common inlet 1 pc
1.8 Common outlet 1 pc
Hfsdpew Hzbcsfx Ad Ren
1.9 Burner unit (BALTUR) 1 set
1.10 Burner fuel pump 1 pc
1.11 Burner blower 1 pc
1.12 Elevator inlet 1 pc
2.1 MIXER CHASSIS UNIT 1 pc
2.2 Asphalt mixer + hot aggregate elevator 1 pc
2.3 Common weighing hopper 1 pc
2.4 Loading crane and weighing vessel 1 pc
2.5 Screw conveyor for loading 1 pc
2.6 Bitumen weighing vessel 1 pc
2.7 Bitumen pump mixer 1 pc
2.8 Hot silo (50 t) 3 pcs
2.9 Silo for stock filling 25 m³ 2 pcs
2.10 Vibrating screen 1 pc
3 DUST COLLECTION FILTER
3.1 Jet-pulse filter housing 1 set
3.2 Nomex filter bags and cartridges 1 set
3.3 V spiral dust collector and 1+1 bunker set
3.4 Filling silo (25 t) 2 sets
3.5 Set of screw conveyors for loading 2 pcs
3.6 Filter suction fan 1 set
3.7 Set 1 for contaminated gas duct
3.8 Housing group set 1 pc
4 BITUMEN TANK
4.1 Insulated bitumen tank for oil heating, 50 t capacity (one for PMB) with mixer (vertical), 3 sets
4.2 3-way pneumatic lining valve group 2 sets
4.3 Bitumen pump mixer 1 set
4.5 Metering line for the mixer's bitumen balance 1 set
4.6 Bitumen transfer pump 1 set
4.7 Double-walled bitumen pipe installation 1 set
4.8 Bitumen tank for heating oil, 50 t capacity for hot oil 1 set
4.9 Three-way valve group 2 with pneumatic lining set
5 CHASSIS FOR FUEL AND THERMAL OIL GROUPS
5.1 Thermal oil heater, capacity 1,000,000 kcal/h, 1 set
5.2 Oil boiler 1 set
5.3 Feed oil circulation pump 1 set
5.4 Fuel pump 1 set
5.5 Fuel pump 1 set
5.6 Automation compressor for cabin control software 1 set
6 Granulate feeding system (fractional feed with fan drive) 1 set
7. Cold asphalt recycling system (5 m³ hopper, 500x22,000 mm belt conveyor, 800x4,000 mm belt conveyor with weighing system) 1 set
8. Lining (3 mm layer on 50x50 profile sheeting) for aggregate tank and mixer floor 1 set
9. Real-time gas emission measurement and monitoring system (integrated in PLC and plant automation) (available via internet connection) 1 set
10. Dust monitoring PCE-PQC 23US incl. calibration certificate 1 set
Açık artırma
Biter
d
h
min
s
Açık artırma bitmiş

2.509 km
Multispindle
GildemeisterGM 42-6
Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2007, çalışma saatleri: 55.585 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 4903-0266, milling sayısı: 6, maksimum mil hızı: 2.700 dev/dak, Çubuk çapı (maks.): 42 mm, torna çapı: 42 mm, Donanım: bar besleyici, Submission of a bid obligates the buyer to collect the item on time, no later than 15/11/2025!
The following machines are also being sold exclusively via auction from the same location:
Gildemeister GM 42-6, year 2005: Listing ID A20302860
Gildemeister GM 42-6, year 2004: Listing ID A20303020
Gildemeister GM 42-6, year 2011: Listing ID A20303110
Gildemeister GM 42-6, year 2005: Listing ID A20303220
Gildemeister GM 42-6, year 2007: Listing ID A20303265
TECHNICAL SPECIFICATIONS
Maximum turning diameter: 42 mm
Main spindle speed: 500–2,700 rpm
Number of spindles: 6
Number of side slides (cross slides): 4
Number of tool spindles: 6
Number of tool positions: 12
Maximum bar diameter for round stock: 42 mm
Maximum across flats for hex bar: 36 mm
Maximum bar dimension for square stock: 29 mm
Maximum bar feed in one station: 130 mm
Maximum bar feed in two stations: 260 mm
Maximum radial slide travel: 52 mm
Radial slide adjustment, forward/backward: ±20 mm
Maximum axial slide travel: 72 mm
Maximum rapid traverse speed: 9.6 m/min
Maximum tool spindle travel: 120 mm
Adjustment, forward/backward: 10 mm
MACHINE DETAILS
Dimensions & Weight
Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm
Hfsdjxnxm Aopfx Ad Rjn
Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm
Weight: 9,800 kg
Weight with bar feeder: 10,000 kg
Main Drive Motor
Rated power of main drive: 22 kW
Main drive speed: 1,455 rpm
Coolant tank capacity: 750 L
Operating hours: 55,585 h
EQUIPMENT
Bar magazine (length: approx. 3,000 mm)
Work tables
Additional accessories
küçük ilan

403 km
Dokuma maki̇nesi̇
Shaoyang SXXS Spunbond NonwovenSpunbond Nonwoven Machine
Ara
Durumu: mükemmel (kullanılmış), Üretim yılı: 2021, çalışma saatleri: 4.200 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: SxxS spunbond nonwoven line, Shaoyang Textile Machinery Spunbond nonwoven manufacturing line SxxS , sms , SSmmS, SmmS,
This equipment is suitable for the production of spunbond nonwovens with a variety of colors and different properties using PP chips as main material mixed with master batch, antioxigen, anti-pilling agent and flame retardant.
SxxS
Currently ss (SxxS) only, customer can do sms or ssmms by upgrading parts
Platform is ready for additional beams, they can invest in additional parts to producr smms or ssmms
The line can be configured to ve extended to produce high grade fabrics (add additional beams to producr more protective layers)
Ⅰ. Application
This equipment is suitable for the production of spunbond nonwovens with a variety of colors and different properties using PP chips as main material mixed with master batch, antioxigen, anti-pilling agent and flame retardant.
7 Calender
7.1 Function
Used for bonding formed webs by pressure and heating.
7.2 Technical data
Process speed: 10-130m/min
Working width: 2000mm
NET 1600-1680mm
Type of rollers: engraved upper roller and plain lower roller
8 Winder
8.1 Function
Used for winding the bonded webs on rolls.
8.2 Technical data
Process speed: 10-130m/min
Hedpfxjwhk Hde Ad Rofn
Working width: 2000mm
Max. winding diameter: 1000mm
critical parts are from reifenhauser enka technica . all spinning
some uninstalled platform parts
Güven mührü
Machineseeker tarafından sertifikalandırılmış bayiler

küçük ilan

586 km
OFSET LEVHA BASKI MAKİNASI
MAN RolandR 704 3B LV Direct Drive
Ara
Durumu: iyi (kullanılmış), Üretim yılı: 2014, Direct Drive
Without sheet reversal
APL (Automatic Plate Loader): Fully automatic plate changing system with motorized clamping and tensioning of printing plates
InlineColorPilot IPC (Graphometronic): In-line color measurement and control system
PressPilot control center
IntegrationPilot plus
Non-stop
Antistatic system at feeder (Eltex)
Antistatic system at delivery (Eltex)
Inking unit temperature control by Technotrans (water-cooled)
Automatic blanket washing device with cloth (Elettra)
Automatic ink roller washing device
Impression cylinder washing device (cloth washing system)
Airglide delivery
ROLAND SelectDryer IR/TL: Infrared/Thermo Air end dryer – High Performance
Performance package IPA reduced
Hedpfxexiw Tqj Ad Rsfn
Chambered doctor blade coating system with chambered doctor blade and anilox roller
Powder Max smart: Powder spraying system
QuickChange Air: Job-specific and reproducible air settings for all relevant air consumers via the control center.
QuickChange Clamp: Multifunctional clamping bar for the coating forme cylinder
QuickChange Color Plus: Self-learning algorithm for various ink and paper types for optimal presetting
QuickChange Transferter: Substrate thickness adjustment
Quickstart: Software for machine control optimization after stops
Premium speed: 18,000 iph max.
LCS: Low Coverage Stabilisation software for inking unit setting with very low ink coverage
Air supply: SelectAirStation
küçük ilan

262 km
H Frame deep d. hydraulic press in stock
KONHİDROLİKPRES FARUK USTAKTP350
Ara
Durumu: yeni, Üretim yılı: 2024, çalışma saatleri: 818 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 350 t, strok boyu: 1.000 mm, garanti süresi: 12 aylar, Teknik Özellikler (Turkish)
Tonaj: 250 barda 350 Ton (yardımcı silindirlerle toplam)
Ana Silindir: Ø395 mm, Rot Ø300 mm, Strok 1000 mm
Yardımcı Silindirler: Ø80 x 100 mm, Rot Ø50 mm, Strok 1000 mm
Pot Silindirleri: Ø180 x 230 mm, Rot Ø115 mm (4 adet)
Motor: 18,5 kW – 25 HP, 1500 d/d, IE3, 380 V
Pompa: 71 cc, 105 litre, değişken debili, güç regülasyonlu pistonlu tip (Tayvan, ithal)
Valf Bloğu: NG-16, 24 DC, P-Q oransallı
Tüm hareketler için hassas seri oransallı; pompa koruma valfi, dekomprasyon basınç boşaltma valfi, koç-pot hattı, basınç transmitterli, yardımcı boğaz koruma valfi, pot-keçe koruma valfi, serbest düşme valfi mevcut.
Elektrik Panosu: Siemens
Ekran: GMT 7” yerli (1 yıl garantili)
Ön Dolum Valfi: NG 160 (Tayvan modeli)
Hızlar:
Aşağı hızlı: 175 mm/sn (P-Q oransal ayarlı)
Yukarı hızlı: 285 mm/sn (P-Q oransal ayarlı)
Yükte hız: 5 – 14,5 mm/sn (P-Q oransal ayarlı)
Ölçüler: Tabla 1200 x 1000 mm, İki tabla arası 1000 mm
Cetvel: Var
Işık Bariyeri: Var
Ağırlık: 15.000 kg ±
Hjdoxf Dzgspfx Ad Rofn
Yağ Deposu: 1300 x 900 x 600 mm, 700 litre
📋 Technical Specifications (English)
Capacity: 350 Tons at 250 bar (including auxiliary cylinders)
Main Cylinder: Ø395 mm, Rod Ø300 mm, Stroke: 1000 mm
Auxiliary Cylinders: Ø80 x 100 mm, Rod Ø50 mm, Stroke: 1000 mm
Cushion Cylinders: Ø180 x 230 mm, Rod Ø115 mm (4 units)
Motor: 18.5 kW – 25 HP, 1500 rpm, IE3, 380 V
Pump: 71 cc, 105 L/min, variable displacement, pressure-compensated piston type (Taiwan, imported)
Valve Block: NG-16, 24 DC, P-Q proportional control
Equipped with precise proportional control for all movements: pump protection valve, decompression relief valve, ram–cushion line, pressure transmitter, auxiliary throat protection valve, cushion-seal protection valve, free fall valve.
Electrical Panel: Siemens
Screen: GMT 7” (domestic, 1-year warranty)
Pre-Fill Valve: NG 160 (Taiwan model)
Speeds:
Down fast speed: 175 mm/s (P-Q proportional adjustable)
Up fast speed: 285 mm/s (P-Q proportional adjustable)
Pressing speed: 5 – 14.5 mm/s (P-Q proportional adjustable)
Dimensions: Table 1200 x 1000 mm, Daylight 1000 mm
Linear Scale: Yes
Light Curtain: Yes
Machine Weight: 15,000 kg ±
Oil Tank: 1300 x 900 x 600 mm, 700 L capacity
Açık artırma
Biter
d
h
min
s
Açık artırma bitmiş

2.509 km
Multispindle
GildemeisterGM 42-6
Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2011, çalışma saatleri: 40.724 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 8018030323B, milling sayısı: 6, maksimum mil hızı: 2.700 dev/dak, Çubuk çapı (maks.): 42 mm, torna çapı: 42 mm, Donanım: bar besleyici, Submitting a bid obligates the buyer to collect the item within the deadline, no later than 15/11/2025!
The following machines are also being sold exclusively via auction from the same location:
Gildemeister GM 42-6, Year 2005: Search ID A20302860
Gildemeister GM 42-6, Year 2004: Search ID A20303020
Gildemeister GM 42-6, Year 2007: Search ID A20303190
Gildemeister GM 42-6, Year 2005: Search ID A20303220
Gildemeister GM 42-6, Year 2007: Search ID A20303265
TECHNICAL DETAILS
Maximum turning diameter: 42 mm
Main spindle speed: 500–2,700 rpm
Number of spindles: 6
Number of cross slides: 4
Number of tool spindles: 6
Number of tool positions: 12
Max. bar diameter for round material: 42 mm
Max. across flats for hexagonal material: 36 mm
Max. side length for square material: 29 mm
Max. bar stroke at one station: 130 mm
Max. bar stroke at two stations: 260 mm
Max. radial slide travel: 52 mm
Radial slide adjustment, forward/backward: ±20 mm
Max. axial slide travel: 72 mm
Max. rapid traverse speed: 9.6 m/min
Max. tool spindle travel: 120 mm
Adjustment, forward/backward: 10 mm
MACHINE DETAILS
Hfsdpfxjxnxkhj Ad Ron
Dimensions & Weight
Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm
Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm
Weight: 9,800 kg
Weight with bar feeder: 10,000 kg
Main motor
Rated power main motor: 22 kW
Main motor speed: 1,455 rpm
Coolant tank capacity: 750 L
Operating hours: 40,724 h
EQUIPMENT
Bar loading magazine (length: approx. 3,000 mm)
Work tables
Additional accessories
Açık artırma
Biter
d
h
min
s
Açık artırma bitmiş

2.509 km
Multispindle
GildemeisterGM 42-6
Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2005, çalışma saatleri: 69.287 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 4903-0238, milling sayısı: 6, maksimum mil hızı: 2.700 dev/dak, Çubuk çapı (maks.): 42 mm, torna çapı: 42 mm, Donanım: bar besleyici, Submitting a bid constitutes an obligation to collect the items within the specified period, no later than 15.11.2025!
The following machines are also being sold exclusively via auction from the same location:
Gildemeister GM 42-6, Year 2004: Search ID A20303020
Gildemeister GM 42-6, Year 2011: Search ID A20303110
Gildemeister GM 42-6, Year 2007: Search ID A20303190
Gildemeister GM 42-6, Year 2005: Search ID A20303220
Gildemeister GM 42-6, Year 2007: Search ID A20303265
TECHNICAL DETAILS
Maximum turning diameter: 42 mm
Main spindle speed: 500–2,700 rpm
Number of spindles: 6
Number of side slides (cross slides): 4
Number of tool spindles: 6
Number of tool positions: 12
Maximum bar diameter for round material: 42 mm
Maximum across-flats for hexagonal material: 36 mm
Maximum dimension for square material: 29 mm
Maximum bar stroke in one station: 130 mm
Maximum bar stroke in two stations: 260 mm
Maximum stroke of radial slide: 52 mm
Radial slide adjustment, fore/aft: ±20 mm
Maximum stroke of axial slide: 72 mm
Maximum rapid traverse speed: 9.6 m/min
Maximum stroke of tool spindles: 120 mm
Adjustment, fore/aft: 10 mm
MACHINE DETAILS
Dimensions & Weight
Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm
Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm
Hodpfjxnxapox Ad Rjfn
Weight: 9,800 kg
Weight with bar feeder: 10,000 kg
Main Motor
Rated power of main motor: 22 kW
Main motor speed: 1,455 rpm
Coolant tank capacity: 750 L
Operating hours: 69,287 h
EQUIPMENT
Bar magazine (length: approx. 3,000 mm)
Work tables
Additional accessories
Sizin için aramayı kolaylaştırıyoruz: "damatomacchine forum"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.
Kullanılmış Damatomacchine Forum (21.380)
Artık Machineseeker genelinde, 200.000’den fazla kullanılmış makineyle arama yapın.En popüler makine adlarını inceleyin:

Şimdi bilgi alın
+44 20 806 810 84
+44 20 806 810 84
Şimdi ilan ver
*ilan başına/ay