Kullanılmış Yapı Çitleri satın al (8.445)

Durumu: kullanılmış, New: Yes Usable Material: Bitumen Unladen weight: 18,000 kg Fully automatic polymer modification plant TECHNICAL SPECIFICATIONS Grinding and homogenizing of polymer (SBS, APP, KRATON, etc.) and bitumen. Feed: bitumen-polymer premix Flow rate: max. 15 t/h Density: 1.1 g/cm³ Viscosity: max. 20,000 mPa s (cP) Temperature: 190 °C. Solid material: Machine inlet: max. 3–6 mm Machine outlet: max. 0.2 mm MOTOR 130 kW Speed 3,000 min-1 Voltage 400 V, 50 Hz, 3 phases Start method Y / Δ 2. VERTICAL MIXING TANK Frame: - Manufactured as a vertical rectangular profile. - Built to dimensions with a capacity of 11 m³. - The tank body is made from 5 mm St37-grade steel plate. - The bitumen fill pipe consists of 3" DN80, PN16, DIN2633 1 unit; the discharge pipe consists of 3" DN150, PN16, DIN2633 and 3" DN80, PN16, DIN2633 2 units. - The inspection cover measures 500 x 500 mm. b) Heating - Heated externally with diathermic hot oil. - Leak test conducted at not less than 6 bar. Cgjdpfx Agsx D Df Nemsp c) Insulation - 100 mm rapid wire mesh rock wool in compliance with Turkish Standards Institute (TSE). - External surface is made of stainless steel sheet, custom produced to tank dimensions. d) Mixing system - 2 x 7.5 kW agitator motors, 60 rpm - Chain-driven - Sealed at the drive unit for leak tightness - Bearings by SKF or FAG - Fixed blades mounted on the tank interior walls to enhance dispersion and achieve a homogeneous mixture e) Temperature indicators are digital and analogue with two outputs each. f) Integrated connection paddles, ladders, and platform included. 3. BITUMEN PUMPS - 2 ½ XLA type with oil heating - Pump capacity: 25 t/h bitumen pumps - Coupled with a 7.5 kW, 400 rpm gearmotor 4. SBS FEED UNIT (POLYMER MODIFIED GRANULES) a) Feed hopper - Slot width of 500 x 500 mm - Manufactured from 4 mm plate - Mounted with granule feed, 30 m³/h capacity, in the feed helix - Frame with 5 mm wall thickness, pipe diameter 220 mm - Leak tightness at the drive end - Bearings by SKF or FAG - 5.5 kW, 80 rpm gear motor with coupling drive 5. PIPEWORK AND EQUIPMENT a) Pipes - Steel pipes according to DIN 171175 (DN200, DN150, DN100, DN80, DN65, DN25) - Mill line built with 3" internal pipe and 4" outer jacket pipe - Jacket pipes welded to TSE standards - Bypass pipes at appropriate locations in 1" diameter b) Compensators - DN 50, DN 80, PN 16, for 400°C c) 3-way and 2-way heated valves - Conforms to TSE standards - Pneumatic control - For operation under high pressure (16 bar) and temperature (230°C) d) Hot oil valves - KLINGER or THERMO brand piston hot oil valves used - Dimensions: DN 25 PN16, DN65 PN16, DN50 PN16, etc.

Durumu: kullanılmış, New: Yes Color: Silver Usable Material: Bitumen Unladen Weight: 9,500 kg Cargo Space Capacity: 50,000 l BITUMEN TANK (50 TONS) • The tank capacity must be 50 tons. • The tanks must be manufactured in accordance with TSE practices and Highway Commission standards. • The tank must be equipped with a thermal oil heating system. • Seamless coil pipe system for heating • Bitumen temperature up to mixing temperature • The fuel tank must include a level and temperature indicator, suction nozzle, filler opening, and ventilation system, inspection hatch, and drain. • Support legs must be provided under the tank, and its surface must be insulated with 50 mm rock wool and covered with 0.80 mm galvanized sheet metal. 1. THERMAL OIL GENERATOR Codpfx Aox D Dbkjgmogp • The generator capacity must be 2,000,000 kcal/h. • The system must be designed for diesel fuel operation. • The generator must include a 1,500 l filling tank. • The generator must be horizontal, equipped with a seamless steel-drawn hot oil pipe, double-walled and of circulation type. • The generator body must be insulated with 100 mm rock wool and covered with aluminum sheet metal. • The generator system must be manufactured to production standards and must include a compensating tank, degasser, oil filter, valves and a fully automatic ignition-controlled burner, control panel, pump, and necessary safety equipment. • The coil consists of at least 30 m² of seamless steel tubing. • The generator must be equipped with an integrated warning system to protect the entire system against hazardous situations caused by hot oil level or low heat transfer oil. • The burner system must be automatically activated depending on the set operating temperature of the heat transfer oil. • The system must be supplied as a complete package.

Durumu: kullanılmış, New: Yes Color: Silver Usable Material: Bitumen Unladen Weight: 9,500 kg Cargo Space Capacity: 50,000 l BITUMEN TANK (50 TONS) • The tank capacity must be 50 tons. • The tanks must be manufactured in accordance with TSE practices and Highway Commission standards. • The tank must be equipped with a thermal oil heating system. • Seamless coil pipe system for heating • Bitumen temperature up to mixing temperature • The fuel tank must include a level and temperature indicator, suction nozzle, filler opening, and ventilation system, inspection hatch, and drain. Cedox D A R Depfx Agmsgp • Support legs must be provided under the tank, and its surface must be insulated with 50 mm rock wool and covered with 0.80 mm galvanized sheet metal. 1. THERMAL OIL GENERATOR • The generator capacity must be 2,000,000 kcal/h. • The system must be designed for diesel fuel operation. • The generator must include a 1,500 l filling tank. • The generator must be horizontal, equipped with a seamless steel-drawn hot oil pipe, double-walled and of circulation type. • The generator body must be insulated with 100 mm rock wool and covered with aluminum sheet metal. • The generator system must be manufactured to production standards and must include a compensating tank, degasser, oil filter, valves and a fully automatic ignition-controlled burner, control panel, pump, and necessary safety equipment. • The coil consists of at least 30 m² of seamless steel tubing. • The generator must be equipped with an integrated warning system to protect the entire system against hazardous situations caused by hot oil level or low heat transfer oil. • The burner system must be automatically activated depending on the set operating temperature of the heat transfer oil. • The system must be supplied as a complete package.

Durumu: kullanılmış, New: Yes Usable Material: Bitumen Unladen Weight: 16,000 kg Fully automatic bitumen emulsion system 1. COLLOID MILL (10 m³/hour) 1 2. FOAM TANK (5 m³) 1 3. BITUMEN FEED PUMP 1 4. FOAM GENERATION SYSTEM 1 5. PIPEWORK AND FITTINGS 1 6. CONTROL PANEL 1 7. CHASSIS 1 FOAM TANK (1 unit) - Frame - Box section profile - Capacity: 5 m³ - The tank body is made from 3 mm AISI 304 stainless steel plate - All welds are performed using appropriate stainless steel TIG welding b) Heating - 2-inch stainless steel pipe - Oil inlet and outlet pipes are 1 inch, DN50, PN16, DIN 2633 - Pressure test is performed at 6 bar c) Mixing system - 3 kW, 60 rpm agitator motor - Drive is by chain and sprocket - Sealing is achieved with packings - Bearings are SKF or FAG - Fixed baffles on the outer walls are installed to improve dispersion and ensure a homogeneous structure d) Temperature indicators are both digital and analogue, with two outputs provided - The bitumen pump capacity is max. 8 m³/h - Fitted with a 7.5 kW, 400 rpm gear motor - The bitumen meter is designed for a capacity of 10 m³/h a) Pipes Csdpex D A Rkjfx Agmogp - Manufactured from steel pipes in accordance with DIN 171175 (DN200, DN150, DN100, DN80, DN65, DN25) - The mill line consists of 1.5-inch inner pipe and 2-inch outer jacket pipe - Jacket pipes are welded to TSE standards - Bypass pipes are made at suitable locations in 0.5-inch diameter b) Expansion joints - DN 50, DN 80, PN 16, rated for 200°C c) 3-way and 2-way valves with heating - Compliant with TSE standards - Designed for operation under high pressure (16 bar) and temperature (230°C) d) Hot oil valves - Hot oil valves by KLINGER or THERMO, heat-resistant - DN25 PN16, DN65 PN16, DN50 PN16 e) Filter - Features an inner container made with 3 mm wire, designed for easy and frequent cleaning - - The panel is assembled in accordance with IC standard

Üretim yılı: 2016, Durumu: yeni gibi (sergi parçası), 3D çit panelleri için manuel PVC toz boya hattı (ASLA KULLANILMADI) Kaplama türü - elektrostatik PVC kaplama hattı yarı otomatiktir. 2-3 işçiye ihtiyaç vardır. Fırın kapasitesi - 10 adet 3D çit paneli ... pişirme süresi yaklaşık 15 dakika (IGP üreticisinin rengiyle). Tabii ki pişirme süresi renk kalitesine ve rengin kimyasal bileşimine bağlıdır. Hat modüler bir sistem üzerine kurulmuştur, bu da fabrikadaki boş alan olanaklarına göre çeşitli şekillerde kurulabileceği anlamına gelir. Hat bileşenlerinin boyutları - 1. Polimerizasyon fırını - 2.500 x 3.500; Yükseklik - 3.200 mm 2. Boyama kabini (2 adet) - 3.000 x 2.000; Yükseklik - 3.200 mm Cgjdpfsil Agnjx Agmsp 3. Yıkama haznesi - 2.200 x 3.500; Yükseklik - 3.200 mm 4. Banyo - 2.500 x 2.500 - Yükseklik - 900 mm artı iki yeni Gamma tabancası.

Üretim yılı: 2016, Durumu: yeni gibi (sergi parçası), 3D çit panelleri için manuel PVC toz boya hattı (ASLA KULLANILMADI) Kaplama türü - elektrostatik PVC kaplama hattı yarı otomatiktir. 2-3 işçiye ihtiyaç vardır. Fırın kapasitesi - 10 adet 3D çit paneli ... pişirme süresi yaklaşık 15 dakika (IGP üreticisinin rengiyle). Tabii ki pişirme süresi renk kalitesine ve rengin kimyasal bileşimine bağlıdır. Hat modüler bir sistem üzerine kurulmuştur, bu da fabrikadaki boş alan olanaklarına göre çeşitli şekillerde kurulabileceği anlamına gelir. Hat bileşenlerinin boyutları - 1. Polimerizasyon fırını - 2.500 x 3.500; Yükseklik - 3.200 mm 2. Boyama kabini (2 adet) - 3.000 x 2.000; Yükseklik - 3.200 mm 3. Yıkama haznesi - 2.200 x 3.500; Yükseklik - 3.200 mm 4. Banyo - 2.500 x 2.500 - Yükseklik - 900 mm Cgedeiryd Uepfx Agmop artı iki yeni Gamma tabancası.

Durumu: kullanılmış, Üretim yılı: 2014, 3D çit panelleri üretim hattı PRATTO Eurofence ve "V" şekilli çit dahil olmak üzere yüksek kaliteli tel örgü 3D çit panelleri üretmek için tasarlanmış yüksek performanslı örgü kaynak hattı. Tel örgülerin hassas bir şekilde şekillendirilmesini sağlayan bükme ünitesi ile donatılmıştır Ağ genişliği: 2500 mm, En dıştaki iki hat teli arasındaki mesafe: 2500 mm Hat teli çap aralığı: 4 ila 6 mm Cjdpfx Agetmw Nromogp Çapraz tel çapı aralığı: 4 ila 8 mm Maksimum hat teli sayısı: 42 Tek çapraz telli hazne beslemeli Çapraz tel aralıkları: 50 - 500 kademesiz programlanabilir Hat teli aralığı: 50 mm, 50 mm'lik adımlarla programlanabilir Tel bobinlerinden hat telleri Toplam güç Kw: 1250 Gerilim: 400v-3-50

Üretim yılı: 2022, Durumu: yeni, Açı: 0° - 90° Cgodsi Ezr Nopfx Agmop maksimum kesme uzunluğu: 1370 mm

Üretim yılı: 2000, Durumu: kullanılmış, Durum: çok iyi Cjdpfx Aoknyhzjgmjgp

Durumu: yeni gibi (kullanılmış), Üretim yılı: 2015, I am selling an automatic CNC processing center for BLOCK-HOUSE production, Hundegger K2i, year of manufacture 2011. Almost as new – year of manufacture 2015. - Under-table crosscut saw with saw blade diameter from 750 mm to 800 mm, 360° rotation, servo-hydraulic tilt 0–65° - Universal 5-axis unit with circular cutter, end mill, and end mill, milling head diameter 350 mm x 100 mm end mill - Combination holder for at least 5 tools with horizontal drilling device up to 2.5–3.0 kW power, maximum drilling diameter 24 mm, minimum drilling length 460 mm, minimum processing depth 300 mm - Positioning and clamping of the workpiece using gripping arms. While the workpiece is measured and transported to the desired position, the gripping arms hold the workpiece as close as possible to the tool for stabilization. Cgsdpfxoxtxkxo Agmjp - The processed material can be rotated automatically. - Tolerance +/- 2 mm at a length of 13 m - Fully automatic wood feed with feed roller conveyor, feed and sliding transverse conveyor Equipment and options included: - K2i: Under-table tilting crosscut saw - K2i: Universal milling unit – 4-axis (UF4) - K2i: Combination support for vertically operating tools - K2i: Drilling unit (2.2 kW) – vertical drilling direction - K2i: Combination support for horizontally operating tools - K2i: Drilling unit (2.2 kW) – horizontal drilling direction - K2i: Marking tool (rear or operator side) - K2i: Fully automatic hydraulic rotation of elements - K2i: Transport and positioning system "two-hand operation" - K2i: Electronic connection - K2i: Roller conveyor for removal of wooden elements with pusher - K2i: 5-arm storage table - K2i: Safety device - K2i: High-quality machine surface - K2i: Extension of the K2i frame to 13.56 m - K2i: 5-axis universal milling unit – UF5 (upgrade to 4 axes) - K2i: Remote maintenance (incl. portable video camera) - K2i: Dovetail milling machine (with rotating knives) 60x28x16.5 Ideal for timber construction! Available immediately.

Durumu: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Yapılandırılmış ambalajların üretimi için makineler. Bir adet H-142 model 1986 yapımı 900x1400 mm boyutlarında vargel pres + Paket Proje üretimi, yılı bilinmeyen ancak 2009 yılında satın alınan kutu yapma makinesi - besleme genişliği 1450 mm - yükseklik kanal açma için ek oluk makarası - 350 mm yarık bıçağı + kendinden yapışkanlı bantlar için silikon bant distribütörü ve açma ipi ile donatılmış yapıştırma makinesi - 1400 mm besleme genişliği - 2010 model - sıcak tutkal sistemi. Tüm makineler kullanılmıştır. Çalışır durumdadır ve işlevseldir. Bkz. resimler ve belgeler. Cgjdpfxjyan I Ie Agmop

Durumu: iyi (kullanılmış), Askı, tutucu, destek bloğu, destek ayağı; bantlı konveyör, kayışlı konveyör, taşıma bandı, bantlı taşıyıcı, makaralı konveyör için - Destek bloğu: yükseklik ayarlı, döner - Yükseklik: yaklaşık 620 mm'ye kadar - Genişlik: 540 mm - Ölçüler: fotoğraflara bakınız - Adet: 2 adet mevcut - Fiyat: adet başı Csdpfxoh Eciyj Agmogp - Toplam ölçü: 665/150/H617 mm - Ağırlık: 13,4 kg/adet

Durumu: kullanılmış, Üretim yılı: 2021, makine/araç numarası: 127 0167, ID No.: 1063916, with raised seat; no documentation available! No additional accessories included! Cgjdpfxjyn Niie Agmsp

Durumu: yeni, Üretim yılı: 2024, Buchtisch für Hardcover - Casemaker Das Gerät ist fabrikneu und verfügt über eine 12-monatige Garantie. Hergestellt in Europa aus Markenzulieferteilen. Arbeitszyklus: Der Bediener legt das Umschlagmaterial manuell in die Leimstation, in der der Heißleim automatisch aufgetragen wird (Arbeitstemperatur 60–70 °C). Ein mit Leim versehener Umschlagbogen wird vom Bediener manuell auf dem Saugtisch positioniert und anschließend Kartonzuschnitte sowie Rückeneinlage ebenfalls manuell aufgelegt. Der vorbereitete Umschlag wird von Hand in die Maschine eingelegt, welche dann durch das patentierte Bürstensystem die oberen und unteren Kanten des Umschlagmaterials umschlägt und verklebt. Während des Kaschierprozesses wird der Umschlag durch Führungswalzen gepresst. Die Umschläge, die die Einheit verlassen, sind sofort zur Weiterverarbeitung bereit. Cgodpfxsya Iuho Agmop Maschinenausstattung: – Leimgerät zum Auftragen des Leims auf die Oberseite des Bogens – Arbeitstisch mit Saugeinrichtung – Führungsleisten zur Fixierung von Furnier und Kartonagen – Umschlagmodul – Ablagetisch Technische Daten: Max. Format: 840 x 500 mm Min. Format: 100 x 100 mm Leistung: 100–150 Umschläge/Stunde Materialstärke Umschlag: 80–200 g/m² Kartonstärke: 1–4 mm Materialüberstand: 13–20 mm Leimtemperatur: 30–100°C Leimkapazität: 2–3 kg Stufenlose Geschwindigkeitsregelung der Walzen und Bürsten Verarbeitbare Materialien: Gewebe, Kaschiertes Papier, Fotopapier, Kunstleder, PVC, Polyurethan Maschinenabmessungen: 1.500 x 1.000 x 1.000 mm Stromversorgung: 380 V Leistungsaufnahme: 3,7 kW Maschinengewicht: 500 kg

Durumu: işlem için hazır (kullanılmış), boş ağırlık: 340 kg, toplam uzunluk: 1.430 mm, toplam genişlik: 560 mm, toplam yükseklik: 980 mm, Hem yatay hem de dikey çalışabilir. 3 tahrikli silindir, dijital gösterge. Üst silindirin hidrolik stroku: 124 mm. 28 ve 44 mm boru çapları için takım ile birlikte. Okuma: dijital göstergeli. Silindir çapı: 165 mm. Kalıp mili çapı: 40 mm. Dönme hızı: 10 rpm. Motor gücü: 1,85 kW. Cgsdpfsxlli Eox Agmop

Durumu: kullanılmış, Condition: NEW with pneumatic clamping system. The universally applicable assembly station for the production of wall, ceiling, and roof elements in timber frame construction. - Heavy, base construction of the machine frame for a flat working surface. - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder approximately 420 kg / 4,200 N at 10 bar operating pressure. Clamping can be done in two groups, 5 units and 4 units, so that two elements can be clamped/processed simultaneously. - Working surface paneling with wooden boards wherever technically possible. (Optionally, a perforated steel plate is available, as shown in the photo.) - Stop system at the bottom with 9 plug-in bolts and 7 plug-in bolts on the side for precise elements. - Tilting mechanism of the assembly station via 3 hydraulic cylinders for element weights up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also protected and installed under the assembly station. - Operation of the functions is carried out via a control pendant. - At both ends of the station, a compressed air connection and socket outlet are installed, and on the long side of the station, there are 2 sockets and 2 compressed air connections for connecting hand tools. - The stations are built in a modular system, so that they can be expanded, either immediately or at a later date, with a receiver station to create a complete turning station. A turning station can be seen in picture 3. - Further options: assembly table without tilting function, perforated steel plates, other working dimensions on request. Working area: - Maximum element size (W x H): 12,000 x 3,800 mm Cgjdpfxewv Tqbj Agmep - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of clamping cylinders: 320 mm - Stop/plug-in bolt height: 120 mm - Working height: approx. 700 mm - Color: RAL 7035 light grey

Durumu: mükemmel (kullanılmış), Palet üstü çevresi Variofit Tip 65 Euro paletler için Kullanım yüksekliği: 1200 mm Cgjdjylknnspfx Agmep 3 kat istiflenebilir Birden fazla set mevcut

Üretim yılı: 1991, Durumu: iyi (kullanılmış), Takvim ve blok kaynak makinesi Cgedpfx Ageuq Nn Nemep

Durumu: kullanılmış, Diş açma makinesi LORCH, SCHMIDT & Co Merkez yüksekliği: 200 mm Merkez mesafesi: 400 mm Mil devir hızı: 56 devir/dak. Ayna çapı: 160 mm Karşı punta kursu: 45 mm Karşı punta konikliği: MK2 Motor gücü: 0,25 HP Şebeke bağlantısı: 380 Volt, 50 Hz - Sağ ve sol dönüş - 3 çeneli torna aynası - Mil tahriki redüktörlü motor ile - Sürekli mil deliği yok - Kolu ile hareket eden karşı punta - Matkap mandreni MAS 1, 1-16 mm Alan ihtiyacı U x G x Y: 1200 x 500 x 420 mm Ağırlık: 80 kg Cgsdpfsxf Uwxsx Agmep İyi durumda

Durumu: mükemmel (kullanılmış), Üretim yılı: 1998, Hofmann HT 200 U frame dowel and slot mortising machine with angle adjustment Special drilling machine for stair and window construction, as well as versatile use due to pneumatic height adjustment. Angled doweling and baluster drilling can be easily achieved thanks to the swiveling drilling unit. Motor switchable for two speeds Motor power: 1.5 / 1.8 kW, 1400 / 2800 rpm Motor starts via practical handle switch Precision chuck with two inserts: 16mm and thread M10 Table size approx. 1100 x 240mm Integrated line laser for precise workpiece positioning Drill unit swivels 65 degrees left and right Pneumatic adjustment of working height allows doweling on two levels without resetting Desired drilling heights can be set for each level via handwheel and digital counter; switching is then done pneumatically from the front Cross adjustment approx. 320mm, stepless or in 12mm increments Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, mountable front and rear of the table Cgjdpfx Aoyfta Tsgmsp 2 pivoting workpiece supports 2 side stops, usable as front supports Mobile base Extraction port 80mm Includes 4 used but good condition drill bits: 9, 12, 16, 19mm Minor paint touch-ups, in very good condition—see original photos. A used swiveling slot mortising machine in this condition is very rarely available. CE mark Instruction manual included Dimensions approx. 1200 x 1200 x 1200mm (LxWxH), weight 310kg. The machine can be demonstrated at our site by appointment. We only offer machines that are ready for demonstration in our warehouse—see 'other offers from this provider.'

Durumu: iyi (kullanılmış), Üretim yılı: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment Specially designed for staircase construction, window manufacturing, and versatile use thanks to pneumatically adjustable working height. Angled dowelling and spindle boring are easily accomplished using the swiveling drilling unit. Motor with pole changing, two speeds Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm Motor start via convenient handle switch Equipped with Röhm 1–20 mm two-jaw chuck Linear laser for precise positioning of the workpiece Drilling unit can be swiveled 65 degrees to the left and right Cgedjxmatnjpfx Agmsp Pneumatic adjustment of working height – dowelling on two levels without retooling Desired drilling heights for each level can be set via digital counter; level switching operated pneumatically from the front Cross adjustment 340 mm, stepless or in 12 mm increments, with indexing rail Pneumatic clamping possible at any position, operated from the front Maximum height adjustment approx. 100 mm above table level Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, 1 clamping column repositionable to the front 2 swiveling workpiece supports Extraction funnel Central stop + 1 side stop Fixed mitre stop Length stop as round bar Assorted drill bits Operating manual CE marking The machine has been partially repainted due to the presence of paint splashes. Pneumatic hoses replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and available in our warehouse. See "other offers from this supplier" for more.

Durumu: iyi (kullanılmış), 37 machine tools • Years of manufacture: 1970–2000 • Well-maintained condition For sale is a comprehensive inventory of machines from a locksmith’s workshop or a metalworking company specialized in custom machine construction. In total, there are over 40 predominantly conventional machine tools, solid industrial quality, well cared for, and fully operational. Many of the machines have been repainted in red/blue as part of company practice, but are otherwise in good original technical condition. The package includes, among others: - CNC vertical machining center Alzmetall BAZ 15 - CNC universal milling machine Wemas WM3 - Universal milling machine Deckel FP3A - Guillotine shear BRZESKA FABRYKA 2000/3 - Mini excavator / multifunction device “BOBCAT” FAI 336 - Two Mössner Rekord band saws (large and small) - Cold circular saw Kaltenbach - Mitre saw with table K180 - Surface grinders ABA and ST 30/50 - Cylindrical grinder MSO - EDM machine AEG-Elotherm Elbomat 400 - Eccentric press Helmerding TP8 - Hydraulic press FMA Pokorny 60080-01-5 - Spindle press 10 t - KNUTH Belt & Disc Sander 102800 - Sandblasting device Tremor S.A. Vevey - Column crane 500 kg - Four welding units TransMIG 400 - Column drilling machine Siegfried Franzen - Jungheinrich 'Ameise' (electric pallet stacker) And numerous other machines, workshop equipment, and accessories. Condition: - Consistently well-maintained workshop equipment - Fully functional - Paintwork partially red/blue reworked by the company - Robust machines from high-quality German and European manufacturing Sale & logistics: Cgsdpexx Tl Isfx Agmsp - Individual purchase possible, collection by the buyer - Preferably as a complete package, immediately available - For full purchase, we can provide transport and loading logistics Inspection by appointment possible. Interested? A complete machine list, technical data, photos, and prices are available on request. If you have any questions or would like to arrange a viewing, please do not hesitate to contact us.

Üretim yılı: 2015, Durumu: işlem için hazır (kullanılmış), A wide range of semi-automatic and automatic window manufacturing machines is available. 1) Selecta BSS, year of manufacture: 1994, machine dimensions X/Y/Z: approx. 800mm/500mm/1200mm, weight: approx. 50kg. 2) Urban pneumatic press, year of manufacture: 2011, operating pressure: 0.8MPa, air consumption: 4l/stroke, stroke: 20mm, machine dimensions X/Y/Z: approx. 850mm/850mm/1200mm, weight: approx. 130kg. 3) Hoffmann PU2-VH pneumatic slot milling machine, year of manufacture: 2002, machine dimensions X/Y/Z: approx. 800mm/1200mm/1400mm, weight: approx. 200kg. 5) Selecta FC 106, year of manufacture: 1994, machine dimensions X/Y/Z: approx. 1000mm/800mm/1550mm, weight: approx. 50kg. 6) Batimet FOM wood and aluminum punching machine, year of manufacture: 2004, machine dimensions X/Y/Z: approx. 1000mm/1100mm/1500mm, weight: approx. 60kg. 7) MLA M7 GLF 100, year of manufacture: 2015, power: 1.1kW, operating pressure: 7bar, machine dimensions X/Y/Z: approx. 750mm/850mm/1200mm, weight: approx. 50kg. 8) Machine dimensions X/Y/Z: approx. 400mm/400mm/1250mm, weight: approx. 50kg. 9) Hoffmann MS-35 wood and aluminum mitre saw, year of manufacture: 2003, power: 2x18kW, machine dimensions X/Y/Z: approx. 1200mm/800mm/1500mm, weight: approx. 200kg. An on-site inspection is possible. Machines available for individual sale. Cgodpsucw Tijfx Agmep

Üretim yılı: 2007, Durumu: işlem için hazır (kullanılmış), İnşaat sektörü için kullanılan bir cam ve karbon roving üretim tesisi (takviye filesi) Wilhelm Kneitz mevcuttur. 1) İki adet kombine atkı örme makinesi Karl Mayer DG 6-30 2HS ELS'den oluşan 3D üretim sistemi, üretim yılı: 2007, çalışma genişliği: 2133,6 mm, üretim kapasitesi: yaklaşık 800 m²/8 saat, boyutlar X/Y: yaklaşık 8000 mm/15000 mm, ağırlık: yaklaşık 2600 kg. 2) Bir adet atkı örme makinesi Karl Mayer Cop HS 2-ST HG'den oluşan 2D üretim sistemi, incelik: 1/6 inç, üretim yılı: 2012, çalışma genişliği: 2540 mm, maks. mümkün çalışma genişliği: 3505,2 mm, boyutlar X/Y: yaklaşık 5500 mm/8000 mm, kurulum alanı X/Y: yaklaşık 14000 mm/18000 mm. 3) Numune üretim ünitesi Karl Mayer Malimo 14022/PS-S2, üretim yılı: 1998, incelik: 1/6 inç, opsiyonel incelik: 1/12 inç, maks. çalışma genişliği: 1270 mm, kurulum alanı X/Y: 4000 mm/6000 mm, devir hızı: yaklaşık 800 dev/dak. Dökümantasyon mevcuttur. Yerinde inceleme mümkündür. Cedpfx Aoxpw Tdsgmjgp

Durumu: kullanılmış, Üretim yılı: 2018, Overview This complete brewing and packaging line was built in 2018, primarily by Cespedes (Spain) and other European manufacturers such as Anfara, Sommer, and Braumanufaktur Werk. The installation includes brewhouse, fermentation, utilities, CIP, and filling equipment, all constructed from AISI 304 stainless steel. With a brewhouse capacity of 1,500 liters per batch and three 3,000-liter fermenters, the system is designed for small to mid-sized breweries. The plant is in excellent condition and ready for immediate operation. Technical Data Capacity: 1,500 l per batch (brewhouse), 3 × 3,000 l fermenters Formats: Bottles and cans (330 ml, 440 ml, 500 ml) Brewing system: steam-heated, fully stainless steel Cgjdpfew U Tgxsx Agmsp Filler: 6-head semi-automatic isobaric bottle filler, modular semi-automatic filler and seamer for cans (approx. 150 cans/h) Scope of Supply Brewing Kettle / Whirlpool Tank | Cespedes | – | 2018 | 1,500 l usable volume, double jacket, steam heated, fully insulated, AISI 304 stainless steel Mash/Lauter Tun | Cespedes | – | 2018 | 2,000 l usable volume, motorised agitator, insulated, AISI 304 stainless steel Hot Liquor Tank (HLT) | Cespedes | – | 2018 | 3,000 l, insulated, with heating jacket Fermentation/Maturation Tanks (3 units) | Cespedes | – | 2018 | 3,000 l usable each, pressure rated up to 3 bar, insulated, cooling jacket Control Panel | Cespedes | – | 2018 | Recipe management, temperature control, frequency inverter Work Platform with Ladder | Cespedes | – | 2018 | Stainless steel, non-slip, with handrail Connection Bench + Piping | Cespedes | – | 2018 | Stainless steel, sanitary DIN valves, incl. helicoidal pump Plate Heat Exchanger | – | UPF34/70 | – | Stainless steel, for wort cooling Inline Particle Filter | – | – | 2018 | AISI 304 stainless steel, 0.2 mm slot width Sight Glass | – | – | – | AISI 316 stainless steel, sanitary inline inspection window Steam Generator | Anfara | AV-300 | 2018 | 300 kg/h, 5 bar, oil burner, CE-certified CIP System | – | CDXM 70-5 | 2021 | Flow rate 3.0–9.6 m³/h, 1.5 kW motor Semi-automatic Bottle Filler | Cespedes | ISO-6 | 2016 | 6 filling heads, isobaric, stainless steel Semi-automatic Can Filler + Seamer | Braumanufaktur Werk | Fillmatic | 2021 | modular, formats 330–500 ml, approx. 150 cans/h Malt Mill | Sommer Maschinenbau | Maltman | 2019 | up to 1,500 l batches, 2-roller mill Buffer/Intermediate Tank | – | – | – | 565 l