Kullanılmış Faymonville Max Trailer Max510 Tiefbett 2X12 T Pa satın al (88.297)

Koşul: yeni, azami yük ağırlığı: 96.500 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 26.900 mm, toplam genişlik: 2.750 mm, Donanım: ABS, Our complete range of vehicles, including those available immediately and at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available on request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm * For tractors: 6 x 4 or 8 x 4 * Truck hydraulic connection with flow regulator (20 l/min), including gallows for suspension of supply lines. The tractor's tank must have a minimum capacity of 80 L * With MAX Trailer couplings, otherwise coupling parts to be supplied ex works by the customer * Gallows with winch for spare wheel located at the front of the gooseneck * 3.5 inch kingpin * Steel front wall approx. 400 mm high * Plug-in aluminium side and rear boards for the gooseneck, approx. 400 mm high, anodized finish * Operating levers on the gooseneck protected by a foldable cover Bdodpfxezahp Ss Aqxsc * Illuminated controls at the gooseneck, with on/off switch * One 7-pin socket left and right at the rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for a gooseneck using standard grease NLGI-2 * Hydraulic couplings from gooseneck to lowbed deck with screw-type couplers * Access steps to the gooseneck * Four warning panels extendable approx. 1,000 mm, approx. 423 x 423 mm, with one LED marker light and bracket for rotating beacon * Mounting adapter for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3,000 rpm * Hydraulic connection lines between the power pack and the connector plate at the gooseneck * One LED work light left and right at the rear plate of the gooseneck with separate on/off switches * Radio remote control: - Operation of the power pack, start/stop of the diesel engine. - Operation of steering, in addition to cable remote control, with 2 LED indicators on the receiver for single-track monitoring. - Operation of raising/lowering the gooseneck. - Operation of raising/lowering suspension of running gear. 2-Axle Front Bogie: * Pin-eye coupling front and rear. Length: approx. 2,970 mm; bogie width: approx. 2,750 mm * BEKA-MAX central lubrication system for a 2-axle bogie with standard grease NLGI-2 (not connected to the tie rods) * One 7-pin socket left and right at the rear of the front bogie for warning panels * Bogie surface finished with painted-in sand coating for slip-resistance * Yellow reflective tape according to EU regulations on the side, at extension and at the rear of the trailer * One 7-pin socket for warning panels, left and right at the front bogie, in the axle area * Extendable extensions of approx. 230 mm per side for a 2-axle bogie * 1 pair of M42 threaded blocks between the axles of the front bogie * 1 pair of brackets for warning panels to be inserted into the stake pockets on the outer frame of the load bed Load Bed: * 6-axle, double telescopic load bed with pin-eye coupling at the front and a rear bevel of approx. 500 mm x 8° * Load bed length: approx. 11,000 mm * Technically extendable by approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Standard width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the load bed with standard grease NLGI-2 * Load bed surface finished with painted-in sand coating for slip-resistance * 11 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * Permanently welded intermediate platform, approx.

Koşul: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the specification list. Full equipment details available upon request. GOOSENECK: * Gooseneck in SNT design for optimized loading deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6° * For tractors: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX * Grating flooring with 5 mm steel reinforcement on gooseneck and rear chamfer * 2-inch king pin * Guide plate on the gooseneck for the fifth-wheel plate, approx. 500 mm wide Bodpfxsy Auhho Aqxsdc * Round NATO socket at the front terminal strip (Maeler & Kaege VG 96 917) * On the gooseneck, one pair of removable side alu drop sides, approx. 400 mm high, anodized finish * One LED work light each mounted left and right at the top of the front wall, operated by on/off switch (operation from tractor unit not possible in this configuration) LOADING PLATFORM: * Loading platform, approx. 9,600 mm long, rear chamfer approx. 900 mm x 6° * Loading platform after gooseneck hydraulically liftable/lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg * Continuous grating flooring with approx. 5 mm steel underlay on lift bed and loading platform for additional reinforcement, designed for point loads TYRES: 235/75 R 17.5 3PMSF twin wheel configuration. Brand at our discretion * TPMS tyre pressure monitoring system in accordance with ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle self-steering * 3rd axle with electromagnetically operated reverse lock, activated via reverse gear and manually * 1st axle with traction help * Technical axle load: 12,000 kg each * Air suspension with lift-lower valve HYDRAULIC LOADING RAMPS: * 1 pair two-piece AXS steel ramps with grating surface, approx. 4,920 mm long, approx. 900 mm wide * Hydraulically folding ramp tips * Ramps hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward independently * Flashing lights on outer side of ramp tips, switch located next to ramp controls * Transport lock for ramps using quick-lock mechanism * On-outline sand coating finish on ramp outer frame and ramp tips * Mechanical drop-leg supports on the sides of the ramps for aligning with unloading docks * Control valves for hydraulic ramps located on the right side of the vehicle BRAKING SYSTEM: WABCO EBS-E braking system, meets current EU requirements SURFACE PROTECTION: * HRM-metallization of full vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimum corrosion protection PAINTWORK: * Trailer in carmine red (RAL 3002) * Rims in silver grey * Side panels: natural aluminum * Wheel hubs per axle manufacturer * Lamp panel in pure white (RAL 9010) EQUIPMENT: * Front wall made of steel, removable, approx. 1,600 mm high, incl. connector plate for supply lines to tractor mounted approx. 1,000 mm from the lower edge of the outer frame * Lash chain securing points at inside front wall (left and right), with aluminum troughs below left and right for chain or ratchet strap storage * Behind front wall: approx. 12 mm thick DELIGNIT board bolted on * Two additional pairs of bolted lashing rings (LC 5,000 daN) * Electric cable winch, pulling force approx. 5,400 kg, with radio remote control. Steel cable approx. 24 m long, cable diameter approx. 9.5 mm, incl. cable feed guide.

Koşul: iyi (kullanılmış), toplam uzunluk: 13.500 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2012, zGG: 10.000 kg Teknik durumu: iyi Görsel durumu: iyi Üretim ülkesi: BE Daha fazla bilgi için Christian Theißen ile iletişime geçin. Üretici: Faymonville Model: Euromax STZ-3AUB Bsdpfx Aqjy H Dvcoxsdc Üretim yılı: 2012 Ürün türü: İkinci el Veriler: İlk tescil: 2012 Toplam boyutlar UxGxY: 13,50 x 2,55 x 4,00 m Maksimum izin verilen toplam ağırlık: 40.000 kg Boş ağırlık: 10.000 kg Lokasyon: Essen Hemen teslim

Koşul: iyi (kullanılmış), toplam uzunluk: 13.350 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.700 mm, Üretim yılı: 2012, Yük kapasitesi: 27.300 kg Azami toplam ağırlık (zGG): 12.700 kg Teknik durum: iyi Görsel durum: iyi Üretim ülkesi: BE Daha fazla bilgi için Christian Theißen ile iletişime geçin. Üretici: Faymonville Model: Euromax GTZ-3AUB Üretim yılı: 2012 Ürün tipi: İkinci el Veriler: İlk tescil: 02/2012 Toplam boyutlar (UxGxY): 13,35 x 2,55 x 3,70 m Bedpfey H Du Sex Aqxedc Boş ağırlık: 12.700 kg İzin verilen toplam ağırlık: 40.000 kg Taşıma kapasitesi: 27.300 kg Dingil sayısı: 3 Özellikler: 3 m uzayabilir (16,35 m'ye kadar), zorunlu yönlendirmeli ilave arka dingil, kuğuboynu için hidrolik kaldırma yatağı Konum: Essen Hemen teslim

Koşul: yeni, azami yük ağırlığı: 51.780 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. The following is an excerpt from the equipment list. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimized loading area length, approx. 3,700 mm long, with rear ramped section approx. 1,000 mm x 10° * Suitable for tractor units: 4x2, 6x2, and 6x4 * Plug-in steel front wall, approx. 400 mm high * ASPÖCK UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power pack for controlling hydraulic functions (excluding hydraulic winches) * Outer gooseneck beams with mounting holes for bolted lashing rings * One mounting hole at the rear upper part of the outer beam for a bolted lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in side aluminum drop sides, approx. 400 mm high, anodised finish * On the gooseneck: 1 plug-in aluminum rear board, approx. 400 mm high, anodised finish * Approx. 40 mm thick hardwood flooring above the gooseneck * 2" kingpin * 1 transverse stake pocket rail fitted in the gooseneck deck in front of the ramped section, for plug-in stakes approx. 100 x 50 mm LOADING AREA: * Extendable loading area, approx. 8,800 mm long, with rear ramped section approx. 500 mm x 10° * Recessed well in the deck including the sloped section for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axles fixed, 3rd and 4th axles steering * 3rd and 4th axles with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Mechanical landing legs with 2-speed gearbox and crank * Continuous hardwood flooring approx. 50 mm thick on deck and between axles (increases friction coefficient) Bdedpjyhkrljfx Aqxec * 1 intermediate table with recessed platform, approx. 300 mm wide, for large cross-section sliding tube with sheet metal covering * 1 pair of lashing rings on front cross-member (LC 10,000 daN) * 6 pairs of recessed lashing rings in the outer frame, foldable outward (LC 10,000 daN) * Additionally, 1 pair of external lashing rings on the front cross-member, oriented approx. 90° toward deck (LC 10,000 daN) * Extendable galvanized side extensions, approx. 230 mm per side (without timber boards) * 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in deck in front of 1st axle * Between 2nd and 3rd axles: 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D) * 1 pair mechanical rear supports * 245/70 R 17.5 3PMSF dual tires, brand of our choice HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-HB-HV-M * One pair of two-part steel ramps, approx. 4,350 mm long, 900 mm wide * Hardwood decking * Hydraulically folding ramp tips * Each ramp hydraulically adjustable approx. 235 mm outward and 215 mm inward * Hardwood decking on rear deck slope * Ramp with hardwood surface BRAKING SYSTEM: * WABCO EBS-E braking system in accordance with EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% al...

Koşul: yeni, azami yük ağırlığı: 36.410 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire stock of vehicles, including those available for immediate or short-term delivery, on our website. Partial list of features. Full specification available on request. NECK: * SNT-design gooseneck for optimized loading platform length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front bulkhead, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches) * Approx. 40 mm hardwood decking above gooseneck Bdedpfx Aqey Auh Iexec * 2-inch kingpin * Gooseneck guide plate for fifth wheel, approx. 500 mm wide * Rear of gooseneck equipped for ALU approach ramps * Round NATO socket on front connection strip (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders ahead of the front bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inside the chassis beam) EQUIPMENT: * Loading platform approx. 8,800 mm long, extendable version approx. 4,100 mm, rear with taper approx. 500 mm x 10° * Recess in the loading area and into the taper for excavator dipper stick accommodation, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are routed protected inside the extendable beams and automatically adjust to the platform length * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle steered trailing * 3rd axle with electro-magnetic reverse lock, can be activated by reverse gear and manually * Technical axle load: 12,000 kg per axle, air suspension with lift and lowering valve * 235/75 R 17.5 3PMSF twin tires. Brand of our choice * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load approx. 50,000 kg * Hardwood floor (approx. 50 mm thick) throughout the load area and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the large cross-section extension tube. Intermediate table with recessed platform and extendable mountings for aluminium bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses ahead of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm, with widenings at the bottom (if vehicle equipped with extendable outriggers) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load area between the 1st and 2nd axle * Wheel recesses with square climbing strips approx. 15 x 15 mm and bottom widenings * Aluminium covers for wheel recesses ahead of the axles and between the 1st and 2nd axle, which can also serve as extension planks (if vehicle equipped with extendable outriggers) * Lockable aluminium elements fitted onto the extension pipes of the outriggers * 1 pair of mechanical rear supports * 1st axle with traction aid * Painted sand...

Koşul: yeni, azami yük ağırlığı: 36.590 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front chamfered corners approx. 45°, and with rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Area: * Extendable loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings in the front of the loading floor (LC 10,000 daN) * Cut-outs in the outer frame for attaching tension straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with tread plate covering Bjdpfx Aqjy Auifjxedc Tyres: * Tyres 245/70 R 17.5 3PMSF – brand of our choice. Load index (146/146F) TPMS: * TPMS tire pressure monitoring system according to ECE R 141. Data transfer to the truck is via the standardized EBS interface ISO 11992. For correct display, the truck must be able to receive and show this data. Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * Axle tools Brake System: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel Construction: * Steel construction made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical System: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front terminal strip with sockets 24N, 24S & 15-pin connection according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure is automatically blast-cleaned after welding using a shot blasting machine * Second abrasive blasting with corundum for optimal adhesion of the coating system * Final painting with 2 coats of 2-component topcoat, single colour in RAL 3002 Carmine Red, according to RAL System 841GL * Rims in silver-grey * Rear section metalized and painted in RAL 9010 (pure white) Accessories: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanized front connection strip * Spare wheel holder in front of the front wall (without spare wheel) * Electro-hydraulic power pack * Remote steering front and rear via cable remote control with push buttons, with single-track axle control (without installation in the tractor unit) * Attachment bar for ALU loading ramps on gooseneck with integrated impact protection * At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket * Holder for a beacon at the rear of the trailer * Galvanized foldable supports under the rear bevel of the loading area * 1 pair of recessed lashing rings along the centre beam at the rear in the inclined section (LC 10,000 daN) * Axle load gauge with load diagram * On the tread plates on the gooseneck and loading area, a painted sand layer for slip protection * On the gooseneck, removable aluminium side and rear boards, approx. 2,440 x 400 mm (L x H). The rear galvanized...

Koşul: ikinci el, boş ağırlık: 11.800 kg, azami yük ağırlığı: 36.200 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2022, toplam uzunluk: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R17,5, Donanım: ABS, Faymonville Telemax F-S43 low loader | 3 axles steered via remote control | Heavy-duty lashing points | SAF axles | extendable | stake pockets | Tyres: 245/70 R17.5 | Gross weight: 48,000 kg, payload: 36,200 kg | Dimensions: 13,500 mm + 7,900 mm + 8,100 mm | Errors, input mistakes and prior sale reserved. Bsdpfewm I Ipjx Aqxodc

Koşul: yeni, azami yük ağırlığı: 38.953 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Gross vehicle weight: 49,500 kg Fifth wheel load: 18,000 kg Axle load: 31,500 kg Unladen weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck length: 3,850 mm Fifth wheel height loaded: 1,200 mm Loading platform length: 9,300 mm Extendable by: 0 mm Axle spacing: 1,360 mm Steering angle radius (rear): 2,300 mm Loading height at max. load: 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical Description Gooseneck: Gooseneck with chamfered front corners at 45° and rear taper of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, 30 mm thick. Loading platform: Loading platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear slope of approx. 1,000 mm x 8°. 6 pairs of folding lashing rings facing outward (LC 5,000 daN). 2 pairs of folding lashing rings facing outward (LC 10,000 daN). 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN). Cut-outs in the outer frame of the loading platform for attaching tensioning straps. (LC 2,000 daN). Hardwood flooring approx. 48 mm thick, above the axles fitted with chequer-plate covering. Ramps: Two-piece steel ramps: One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically foldable ramp sections, hydraulic lifting device and can be hydraulically adjusted laterally. Maximum load per pair: 40,000 kg Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: 235/75 R 17.5 tyres as per manufacturer's selection. Bdedpfxeg Sk Trj Aqxsc Axles: SAF axles, air-suspended, with drum brakes, featuring lift/lower function. Last axle is force-steered with electro-magnetic reverse lock, activatable via reverse gear or manually. Axle tools. Brake System: Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit. Steel Construction: Steel construction made from high-strength fine-grained steel. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: Premium and durable corrosion protection via sandblasted welded frame, primed with 2-component (2K) zinc dust primer. High-quality single-tone 2-component (2K) top coat in RAL colours of your choice. Rear metalized and painted in RAL 9010 (pure white). Metallic paint not possible. Electrical System: Electrical system compliant with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets. ISO-compliant connections. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories Included 2" king pin One galvanized steel front bulkhead approx. 400 mm high. At the galvanized front connection strip yellow/red airline couplings. 4 wheel chocks with holder on the front bulkhead (± 5kg). Cable for supplying electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long, max. 250A) between semi-trailer and tractor unit, with plug connection (ANDERSON-ANDERSON). Galvanized folding supports under the rear slope of the loading platform. Bracket for a rotary beacon at the rear of the trailer. Control valves for the ramps installed on right-hand side of trailer (± 4kg). Yellow reflective tape according to EU regulations on the sides and rear of the trailer. Electro-hydraulic unit mounted at the rear under the loading

Koşul: yeni, azami yük ağırlığı: 36.156 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Gross vehicle weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Tare weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Platform length: 13,600 mm Loaded fifth wheel height: 950–1,050 mm Swing clearance at rear: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360 / 1,405 mm Overall width: 2,540 mm Technical Description Load platform: Load platform in extendable design with pneumatically operated locking mechanism. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of fold-out lashing rings (LC 5,000 daN). 2 pairs of fold-out lashing rings (LC 10,000 daN). Cut-outs in the outer frame of the platform for attaching tension straps (LC 2,000 daN). Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load). Axles: SAF axles: SAF CD axles, air-suspended, with disc brakes (377 mm), with lift/lower function (ET 120). Trailing steering axles with electro-magnetic reversing lock, activated via reverse gear or manually. Axle tools (± 80 kg). Brake system: Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Steel construction: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N / S355MC (yield strength 355 MPa) S690QL / S700MC (yield strength 690 MPa) Paintwork: Premium, long-lasting corrosion protection for the standard shot-blasted welded frame ensured by a two-component (2K) zinc-rich primer. High-quality two-component (2K) topcoat, single-colour, in RAL tones of your choice. Rear section metallised and painted in RAL 9010 (pure white). Metallic paint not available. Electrical system: Electrical system according to EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connector panel with sockets 24N, 24S & 15-pin. Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Standard accessories included: Yellow-red air couplings on the galvanised front connector panel. 2 wheel chocks with holders. 2" kingpin. Galvanised steel front wall, approx. 2,200 mm high (± 105 kg), EN12642-XL compliant. Yellow reflector tape according to EU regulations; fitted along the sides, on the extension, and the rear of the trailer. European reflective warning plates (red-yellow) at the rear of the trailer. Platform with approx. 38 mm hardwood floor (± 320 kg). 10 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the platform (± 30 kg). 1 spare wheel holder under the platform, right-hand side in direction of travel. Tyres 435/50 R 19.5, manufacturer’s choice. One mud flap at the rear of the trailer. Manual and documentation on USB stick. Bracket for rotating beacon at the rear of the trailer. At the gooseneck and rear panel, left and right, brackets for warning signs, incl. socket. One transverse INOX toolbox under the platform (1,000 x 400 x 250 mm) (± 135 kg). 6 pairs of WADER container locks in the platform for 1 x 20’ container, 2 x 20’ containers or 1 x 40’ container; an additional locking position provided in the extension for a 45’ container (± 90 kg). 4 pairs of WADER container locks (± 60 kg). Bjdpfog Sk Tvsx Aqxjdc 10 pairs of galvanised plug-in stakes approx. 100 x 50 mm, 1,000 mm high (± 220 kg). 3 pairs of crosswise stake pocket bars mounted in the platform for plug-in stakes 100 x 50 mm (± 95 kg). Storage for 1,000 mm plug-in stakes (± 45 kg). 1 spare wh

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2002, toplam uzunluk: 9.800 mm, toplam genişlik: 2.600 mm, toplam yükseklik: 3.800 mm, süspansiyon: parabolik yaprak (yay), lastik boyutu: 445/65 R22,5, Üretim yılı: 2002, Donanım: ABS, = Diğer seçenekler ve donanımlar = - Yaprak yaylı süspansiyon = Notlar = ANVERS'E TAŞIMA 590 EURO = Diğer bilgiler = Lastik ebadı: 445/65 R22,5 Frenler: Tambur frenler Süspansiyon: Parabolik yaprak yay Boş ağırlık: 6.080 kg Yük kapasitesi: 26.920 kg Azami toplam ağırlık: 33.000 kg Bölme sayısı: 6 Bdodpfx Asyw Uihjqxsc Teknik durumu: çok iyi Görsel durumu: çok iyi

Koşul: yeni, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Additional vehicles available – extract from equipment list. Full equipment details upon request. GOOSENECK: * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front wall, detachable, approx. 400 mm high * ASPÖCK-UNIBOX on the front control panel with 24N, 24S & 15-pin sockets * 3 kW electric-hydraulic power pack for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolted lashing rings: first hole approx. 200 mm from the front, then every approx. 400 mm; 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear of the gooseneck (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring over the gooseneck, over king pin checker plate covering * 3.5 inch king pin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO plug socket on the front control panel (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retaining spring suspended on the outer beams of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, approx. 8,800 mm long with rear chamfer approx. 500 mm x 10° Bedpfxjxarmaj Aqxsdc * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the platform length * BPW axles and suspension, 1st axle with steering, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tyres – brand at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg * On the platform, continuous and between axles interrupted approx. 50 mm thick hardwood flooring (thereby increasing the coefficient of friction). – Slotted holes for hook-in and repositionable bridging elements * At front of platform – 1 adjustable intermediate table, approx. 300 mm wide, for the extension tube with large cross-section, with checker plate covering. – Front and rear with slotted holes for hook-in and repositionable bridging elements * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 7 pairs of recessed, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * Extensions (galvanized) extendable by approx. 230 mm on each side (without wooden planks) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation in tractor unit * TPMS tire pressure monitoring sensors installed in all wheels * Platform locking with conically welded locking profiles every 500 mm * Locking control left and right on the trailer * For the intermediate table, approx. 300 mm wide, a mechanical lock to secure the table to the extension * 5 pairs of threaded blocks on the extendable beam for mounting bolt-on rings M20 (LC 5,000 daN) BRAKE SYSTEM

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2013, yükleme alanı uzunluğu: 10.200 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.500 mm, süspansiyon: hava, lastik boyutu: 385/65R22,5, dingil mesafesi: 1.300 mm, Üretim yılı: 2013, Donanım: vinç, Tyre size: 385/65R22.5 Suspension: Air suspension Rear axle 1: Steered Drive: Wheel Unladen weight: 14,070 kg Payload: 27,930 kg GVW: 42,000 kg Mast: Telescopic (3 sections) Body manufacturer: PALFINGER PK 24001 Bodouc D Uajpfx Aqxjdc

Koşul: yeni, azami yük ağırlığı: 36.400 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment list available upon request. Gooseneck in SNT design to optimize loading deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic operations, excluding hydraulic winches. Without installation of supply connections on the tractor unit * Outer beams of the gooseneck with mounting holes for boltable lashing rings. The first hole approx. 200 mm from the front, then every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * One mounting hole in the upper rear area of the gooseneck's outer beams for a bolt-on lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * 3 pairs of recessed lashing rings inside on the gooseneck's outer beam (LC 5,000 daN) * 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) * 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) * On the gooseneck and rear chamfer, grating surface with 5 mm steel reinforcement * 2-inch king pin * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m in length) between trailer and tractor unit with NATO-NATO plugs * On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish LOADING AREA: * Loading area, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6° * Loading area behind gooseneck hydraulically height-adjustable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg * TPMS tire pressure monitoring system in accordance with ECE R 141 Bdsdoyhkquspfx Aqxsc * BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle steered. 3rd axle with electromagnetically controlled reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion, load index 143/141J (144/144F) * Mechanical landing legs with 2-speed gearbox and crank * Continuous grating surface with approx. 5 mm steel reinforcement underlay, designed for point loads: – on the lift bed – on the loading area * Painted sand coating on the deck plates of the gooseneck and in the transition areas between neck and lifting bed, between lifting bed and loading area, and between loading area and ramps * 1 spare wheel mounting bracket under loading area on right side in front of axles * Cut-outs in the outer frame of the loading area and lifting bed for securing straps (LC 2,000 daN) * 11 pairs of recessed lashing rings flush in the outer frame of the loading area, foldable outwards (LC 10,000 daN): – 3 pairs in the outer frame of the lifting bed – 8 pairs in the outer frame of the loading area * 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): – 3 pairs in the lifting bed – 8 pairs in the rear part of the loading area * Control valves for hydraulic ramps located on the right side of the vehicle * 1 pair of foldable mechanical rear supports with single-handed operation HYDRAULIC LOADING RAMPS: * 1 pair of two-part AXS steel ramps with a length of approx. 4,920 mm and a

Koşul: yeni, azami yük ağırlığı: 67.200 kg, toplam ağırlık: 85.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website. Extract from the specification. Full equipment details available on request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10° * For tractor units: 6 x 2, 6 x 4, and 8 x 4 short * Detachable steel front bulkhead, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flush-mount lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish * 1 plug-in ALU tailboard, approx. 400 mm high, anodized finish * Approx. 40 mm strong hardwood flooring above the gooseneck, checker plate flooring above the kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, incl. overhead gallows for securing supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed in the gooseneck for plug-in stakes approx. 100 x 50 mm LOADING PLATFORM * Extendable loading platform, length approx. 11,000 mm, rear bevel approx. 500 mm x 10° * Pneumatic locking system with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the respective platform length * BPW axles and suspension, 1st axle self-steering, 2nd axle rigid, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve * Tyres: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous hardwood flooring, approx. 50 mm thick, on the loading platform and interrupted between the axles (providing increased friction coefficient) * Slotted holes for suspended and repositionable bridging elements: - on the fixed section behind the gooseneck - at the front of the platform * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate covering, slotted holes front and rear for suspended and repositionable bridging elements * 1 pair of flush-mounted lashing rings, lying, in the fixed front section of the loading platform (LC 10,000 daN) * 9 pairs of flush fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle alignment monitoring, without installation in the tractor * 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535 * Below the gooseneck and at the rear cross member, left and right, a 7-pin socket each with bracket for warning signs * Painted-on sand coating on the outer frame of the platform, the checker plates, and the transition area between the loading platform and... Bdedsrgzv Nepfx Aqxsc

Koşul: yeni, azami yük ağırlığı: 50.400 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our complete range of vehicles with immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK * Gooseneck in SNT design to optimize the loading platform length, approx. 3,700 mm long, rear taper approx. 1,000 mm x 10° Bedpjtx Nwnjfx Aqxjdc * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK UNIBOX at the front connection rail with sockets * 3 kW electric-hydraulic power unit for controlling hydraulic functions (except hydraulic winches) * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized * One removable aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm solid hardwood floor above the gooseneck, over the kingpin with checker plate covering * 2" kingpin * Socket at the rear of the gooseneck for aluminum loading ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOADING AREA * Extendable loading area design, approx. 8,800 mm long, with rear taper approx. 500 mm x 10° * A recess in the loading platform and into the taper for accepting the excavator bucket arm, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st axle steering, all other axles hydro-mechanically forced-steered * 1st axle with electric-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF, twin mounting * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B – static test load: approx. 50,000 kg * Continuous hardwood flooring approx. 50 mm thick on the loading area and interrupted between axles (increases friction coefficient) * 1 intermediate platform, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanised widenings, approx. 230 mm per side (without wooden planks) * Wheel recesses with 15 x 15 mm square climbing bars in front of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts * Aluminum elements lockable on the extension tubes of the widenings * Widenable U-profiles for inserting the aluminum covers: - on the fixed section behind the gooseneck - on the intermediate platform - on the extendable loading area * Wheel recesses with 15 x 15 mm square climbing bars between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts * Aluminum elements lockable on the extension tubes of the widenings * 1 pair of mechanical rear supports * Remote steering from both the front and rear via cable remote control, with axle single-track control, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm long, approx. 900 mm wide * Hydraulically foldable ramp tips * Ramps can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber flooring approx. 25 mm and steel deck approx. 5 mm as additional

Koşul: ikinci el, azami yük ağırlığı: 51.870 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2025, bir sonraki muayene (TÜV): 03/2026, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment – full specification available on request. GOOSENECK Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, rear end tapered approx. 1,000 mm x 10° * For tractor units: 4x2, 6x2, and 6x4 * Detachable steel front wall, approx. 400 mm high * At the front connector strip, yellow-red air couplings * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations control * Outer beams of the gooseneck with mounting holes for bolted lashing rings * One mounting hole at the upper rear area of the gooseneck outer beams for a bolted lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in aluminum rear board, approx. 400 mm high, anodized finish * On the gooseneck, approx. 40 mm thick hardwood flooring * 2-inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Rear section of the gooseneck prepared for aluminum loading ramps * Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) Bdjdpfextc Uhox Aqxjc LOAD PLATFORM * Extendable load platform, approx. 8,800 mm long, rear end tapered approx. 500 mm x 10° * Recess in the platform and in the tapered area for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension * 1st and 2nd axle rigid; 3rd and 4th axles steering trailing axles * 3rd and 4th axles with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear, 2-speed gearbox with crank handle, JOST Modul B – static test load approx. 50,000 kg * Continuous hardwood flooring approx. 50 mm thick on platform, interrupted between axles (increases coefficient of friction) * Platform locking with conically welded locking profiles at approx. every 250 mm * Long holes at the front of the platform for attachable and repositionable bridging elements * Intermediate table with stepped platform, approx. 300 mm wide, for the extension tube with large cross-section, sheet metal cover – front and rear long holes for attachable and repositionable bridging elements – detachable cover level with platform * 1 pair of lashing rings on the front cross beam (LC 10,000 daN) * 6 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN) * Additionally, 1 pair of lashing rings outside on the front cross member of the platform, rotated approx. 90° inwards towards the platform (LC 10,000 daN) * Extensions (galvanized) extendable by approx. 230 mm per side * 1 pair of fixed, open wheel recesses up to the extension, approx. 700 x 410 mm (W x D), on the platform in front of the 1st axle, wheel recesses with sheet metal cover and square climbing strips approx. 15 x 15 mm every approx. 200 mm * Between the 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D). Covers for the wheel recesses split lengthwise, with wooden inlay, outer sections with insert position (cut-off text).

Koşul: ikinci el, Üretim yılı: 2014, Daha fazla bilgi için Theo Lelie ile iletişime geçin. Bdedjxtqkwepfx Aqxsc

Koşul: ikinci el, boş ağırlık: 11.550 kg, azami yük ağırlığı: 30.450 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2019, bir sonraki muayene (TÜV): 01/2027, yükleme alanı uzunluğu: 13.450 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 700 mm, yükleme alanı hacmi: 23 m³, süspansiyon: hava, renk: kırmızı, Üretim yılı: 2018, vites türü: mekanik, Donanım: ABS, Boş ağırlık: 11.550 kg, izin verilen azami ağırlık: 42.000 kg, yük alanı (U G Y): 13.450 mm x 2.540 mm x 700 mm, yük hacmi: 23 m³, hava süspansiyonu, kaldırılabilir dingil: 1. dingil, elektronik fren sistemi EBS, arka yönlendirme: 3. dingil, çift lastik donanımlı, minimum uzunluk 13,45 m, maksimum uzunluk 18,20 m, boş ağırlık 11.550 kg, kingpin yükü 18.000 kg, toplam ağırlık 48.000 kg, Almanya için istisna izni, uzatılabilir, hidrolik rampalar ayarlanabilir, 3. dingil zorunlu yönlendirmeli, lastik ebatı 235/75R17,5 çift, vinç, muayene geçerlilik tarihi 01/2027, YAMT13XXXJ0102830, bağlayıcı olmayan teklif, hata ve ara satış hakkı saklıdır. Resim, teklifi tam olarak yansıtmayabilir. Bsdpfxsy Dng Te Aqxedc

Koşul: ikinci el, Üretim yılı: 2017, Taşıma kapasitesi: 2.856 kg Bodpfx Aqetr Hi Tjxodc Azami toplam ağırlık: 644 kg Ön lastiklerin durumu: 70 Arka lastiklerin durumu: 70 Ön lastikler: - Arka lastikler: - Daha fazla bilgi için lütfen PFEIFER GROUP ile iletişime geçin.

Koşul: ikinci el, Üretim yılı: 2000, Yük kapasitesi: 32.120 kg Azami yüklü ağırlık: 6.880 kg Ön lastiklerin durumu: 0 Arka lastiklerin durumu: 0 Ön lastikler: 385/65-22.5 Arka lastikler: 385/65-22.5 Bdedpfx Aotr Hrxsqxec Daha fazla bilgi için PFEIFER GROUP ile iletişime geçin.

Koşul: ikinci el, makine/araç numarası: WHLT2350100029458, Üretim yılı: 2021, Yük kapasitesi: 2.770 kg Bedpfxetr H Nvo Aqxodc Azami toplam ağırlık: 730 kg KDV/farklı vergilendirme: KDV indirilebilir Ön lastiklerin durumu: 100 Arka lastiklerin durumu: 100 Ön lastikler: - Arka lastikler: - Daha fazla bilgi için lütfen PFEIFER GROUP ile iletişime geçin.

Koşul: ikinci el, Üretim yılı: 2017, Taşıma kapasitesi: 2.856 kg Azami toplam ağırlık: 644 kg Ön lastiklerin durumu: 70 Arka lastiklerin durumu: 70 Ön lastikler: - Arka lastikler: - Bjdpoyaw Ukefx Aqxedc Daha fazla bilgi için lütfen PFEIFER GROUP ile iletişime geçin.

Koşul: ikinci el, makine/araç numarası: WHLT2350100030919, Üretim yılı: 2021, Yük kapasitesi: 2.770 kg Azami toplam ağırlık: 730 kg KDV/farklı vergilendirme: KDV indirilebilir Ön lastiklerin durumu: 100 Arka lastiklerin durumu: 100 Ön lastikler: - Bedpfx Aqotr Hkbexsdc Arka lastikler: - Daha fazla bilgi için lütfen PFEIFER GROUP ile iletişime geçin.

Koşul: ikinci el, makine/araç numarası: WHLT2350100032106, Üretim yılı: 2021, Yük kapasitesi: 2.770 kg Azami toplam ağırlık: 730 kg KDV/farklı vergilendirme: KDV indirilebilir Ön lastiklerin durumu: 100 Arka lastiklerin durumu: 100 Ön lastikler: - Arka lastikler: - Bedjtr Hyxjpfx Aqxsdc Daha fazla bilgi için lütfen PFEIFER GROUP ile iletişime geçin.