Kullanılmış Macc Special 390 A satın al (78.813)

Durumu: yeni, makine/araç numarası: eca976917d325d4adc41b69e8, boş ağırlık: 7.200 kg, azami yük ağırlığı: 27.800 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r 22,5, Further information Chassis semi-trailer for freight forwarding High-strength fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2-inch kingpin, main frame reinforcement for 25 t at the center of gravity over 3 m loading length when retracted. 13 pairs of hooks for lashing strap attachment welded to the crossmembers 23 pairs of lashing rings recessed into the outer frame, each rated for 3.5 t Outer frame with load-lock profile for lashing strap attachment Note! Not usable with side walls! 24 t 2-speed landing gear in reinforced version for unhitching while loaded, single-sided operation, with semi-circular lower section and straight mounting plate, with thrust compensation Wheel chocks with holders Aluminum side underrun protection Rear underrun protection Half-shell mudguards With anti-spray mud flaps in accordance with EU regulations 1 spare wheel carrier for 1 spare wheel, with wheel fastening kit 1 stake storage box, closed at the sides, open at the top, below the loading area, doors on both sides, W=450 mm/H=400/420 mm/D=2460 mm 6 pairs of extendable stake pockets for square tube stanchions 80x80 mm, extendable from loading width 2000 mm to 3100 mm 4 pairs of stake pockets recessed in the outer frame for square tube stanchions 80x80 mm 11 stake pockets centrally recessed in the floor for square tube stanchions 80x80 mm, with reinforcement beams, installed between the outer stake pockets 5 x 3 pairs of stake pockets on the outer longitudinal beams for square tube stanchions 80x80 mm, including reinforcement beams – for load securing to the front and rear during transport of reinforcing steel mesh, 2x5000 mm or 2x6000 mm 6 lightweight plug-in stanchions W=80/D=80 mm, usable height approx. 1850 mm, hot-dip galvanized, top with cable guides for strap tensioning 12 lightweight plug-in stanchions W=80/D=80 mm, usable height approx. 1850 mm, hot-dip galvanized with lashing rings welded to both sides at the bottom Note: Stake pockets/plug-in stanchions are not designed for sole securement of long materials, pipes, etc. without additional lashing 2 plastic tool boxes, with drawer and shelf, W=650/H=520/D=670 mm, lockable with a padlock (lock not included) 6 reinforcing steel winches with wire cable and counter hook, with cable feed-through in the outer frame, 1 removable plug-in gearbox for reinforcing steel winches supplied loose (without frame mounting) Telescoping Main frame telescopic, extendable by max. 4000 mm and lockable at approx. every 500 mm Locking with pneumatic bolt locking + frame locking indicator on both sides, operation via manual button, control for brake/locking and suspension on driver’s side, ahead of the axles Storage compartment between longitudinal beams when extended Axles & Suspension SAF disc brake axles with 430 mm disc diameter Rear axle is self-steering, with automatic reverse lock via reversing light, with additional lock function on the trailer via hand button, and manual override in the tractor unit (pin 10), no truck installation required. Offset axle spacing mm Air suspension 1st axle with automatic lift, also electrically controllable from the truck, with starting aid, no truck installation required (starting aid functional up to 30% axle overload and max. speed of 25 km/h) Brake System 2-line compressed air brake system Color-coded line routing for easy servicing Spring-actuated parking brake Ncjdpfji Ri Szsx Ak Sjr 2 error-proof coupling heads at the front, without connectio

Durumu: yeni, makine/araç numarası: 2dee9cc4124b79c4820f5c3cf, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further information Fine-grained steel welded construction, saddle plate with replaceable 2" kingpin, outer frame slightly slanted, new version with load-lock profile for lashing strap attachment, 24t two-speed landing gear, single-sided operation, with straight base, without sliding compensation. Note: Free support leg corner spacing or free swing radius to the rear approx. 1930 mm, pull-out ladder at the rear, side door retainer, 2 wheel chocks with holders, Side underrun protection made of aluminum, rear underrun protection galvanized steel, quarter-shell mudguards in front of and behind the axle assembly, antispray splash flaps according to EC, rear impact protection. SAF disc brake axles with 430 mm disc diameter, axles/chassis laser-measured for reduction of tire wear and fuel consumption, air suspension 2-line compressed air braking system, color-coded piping for easy service, spring-loaded parking brake, 2 non-interchangeable coupling heads at front, without connecting line, EBS (Electronic Braking System) with EBS socket at front, without connecting cable. Attention: The trailer may only be towed by towing vehicles that can ensure ABS functionality! With raise and lower valve, vehicle stability control system. 385/65 R22.5 tires, brand at manufacturer’s discretion, steel wheel rims, factory silver. 24 Volt, multi-chamber tail lights, side yellow LED lighting, 2 white position lights at the front, 2 white/red lane marker lights at the rear, 2 x 7-pin non-interchangeable sockets at the front, without connecting cable. Floor: Anti-slip phenolic plywood panels approx. 30 mm thick, on longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7100 kg. Front wall/corner posts: 2580 mm high, corner posts in volume design (steel), unlocking device for side tarpaulin at the front wall, crash blocker, lower inside edge with approx. 140 mm high steel impact guard. Center posts: 3 pairs of sliding posts, adjustable over the entire length, with 4 insert pockets per post and long pocket at the bottom, 3 post positions per side. Insert boards: 5 rows of wooden insert boards. Nodpfx Aji Riy Tek Sjcr Rear wall/corner posts at rear: rear corner posts steel up to lower roof edge, hook-in for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf, each with 2 internal locking rods. Tarpaulin: tarpaulin with welded horizontal and vertical belts, stainless steel tensioning locks. Roof: sliding roof, rear end-lift foldable, roof can be pushed from rear to front, L-roof beam for the automotive industry, internal width between roof beams approx. 2490 mm, tarpaulin color: white, 400 Roof non-elastic, minimal deflection of roof beam during loading/unloading, optimal rain gutter at rear on end hoop, above doors. Germany, approval in accordance with EC 2007/46, 24/7 service hotline, Fliegl manufacturer certificate for body stability per EN 12642 XL, prepared for single-line number plate holder, warning sign per ECE-70, reflective stripes: white (continuous along lower edge of side curtain and in upper corners; if visible sideboards, stripe at lower edge of sideboards), reflective stripes: red (surrounding the rear portal). Frame DB 7350 Novagrau, 10-year warranty against rust penetration, landing legs coated black, front corner posts hot-dip galvanized, front wall aluminum, rear corner posts hot-dip galvanized, rear wall white, tarpaulin to RAL as desired, single color and subject to availability. Note: Archive im

Durumu: yeni, makine/araç numarası: 71cc13750cef13b72f7a55abe, boş ağırlık: 5.500 kg, azami yük ağırlığı: 29.500 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22,5², Further Information Chassis Semi-Tipper Fine-grain steel welded construction with lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front wall, patented 24t two-speed landing gear, single-sided operation, with straight lower section, without push-rod compensation 2 wheel chocks with bracket Underride protection, foldable Half-shell mudguards Nedpfxsi Ri Efj Ak Sscr Integrated mudguard holder with stone-repellent surface Anti-spray mud flaps on rearmost axle only 1 tarp pole with bracket 2 towing hooks at rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Axles in off-road version Air suspension 1st axle automatic lift axle, including forced lowering and start assist, operated by pressing brake three times (start assist functions up to 30% axle overload and up to max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against corrosion Brake System 2-line compressed air brake system, color-coded pipelines for easy service Spring-loaded parking brake 2 anti-mix coupling heads at front, without connection line EBS, Electronic Brake System with EBS socket at front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! With raise and lower valve Vehicle stability control system Wheels and Tyres 385/65 R22.5, make per manufacturer’s choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED marker lights 2 white position lights at front 2 white/red contour marking lights at rear 2 x 7-pin anti-mix sockets at front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chromed, with HD coupling nut, fixed part, NW 48 mm (without hose connection) Operated hydraulically via vehicle PTO Body Aluminium box body made from high-quality, wear-resistant material; front wall 5 mm thick, external side walls from 30 mm hollow section profiles, expertly welded, with spill-repellent top rail profile. Internal ladder on front wall (not with Cramaro option). Shovel and broom holder outside on front wall. Greenline – conical and aerodynamic body shape Membrane – tailgate Tailgate pendulum-mounted with double hinge and split 1/2 to 1/2 with top swing arm, with one grain slide per door. Tailgate with rubber seal. Note: Heat-resistant up to max. 170°C! Floor throughout 6 mm thick Standing platform with access steps, connector plate for air/electrics and brake with ample space for ease of use Roll tarp to be stowed on right side (FR-right) with central locking on left side (FR-left) Operating Notes For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent material damage and corrosion. The stated gross weight is technically possible; depending on the load, the gross weight may not be achievable within the allowable axle/kingpin/load limits. (Poor driving and trailing behavior may result from incorrect load distribution) Country of Registration / Signs Germany Approval according to EC 2007/46 24/7 Service Hotline Prepared for single-line license plate holder Conspicuity markings with reflective tape according to ECE R 048, white side and red rear Paintwork Frame DB 7350 Novagr

Durumu: yeni, makine/araç numarası: 92df8e9d6c187f34b20298f39, boş ağırlık: 4.900 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22,5², Further Information Chassis Semi-Trailer Tipper Fine-grained steel welded construction, lightweight design, saddle plate with replaceable 2" kingpin Patented curved front end Central telescopic support leg, uncoupling with load not possible; when uncoupled, vehicle must be positioned inclined towards the rear. 2 wheel chocks with holders Foldable underrun protection Half-shell mudguards Integrated mudguard mount, stone-repellent surface With anti-spray splash guards on the last axle only 1 tarpaulin bar with holder 2 towing hooks at the rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Axles in off-road specification Air suspension 1st axle with automatic lift axle, including forced lowering and traction aid, actuated by braking three times (traction aid functional up to 30% axle load exceedance and up to max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line compressed air braking system, color-coded piping for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS electronic braking system, with EBS socket at the front, no connecting cable Note: The trailer must only be towed by tractors that ensure the effectiveness of ABS! With raise & lower valve Vehicle stability control system Wheels and Tires 385/65 R22.5 – manufacturer at the manufacturer's choice Steel rims, factory silver Electrical System 24 volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck PTO Bodies Aluminum box body made of high-quality, abrasion-resistant material: front wall 5 mm thick, outer rear walls made of 30 mm hollow chamber profiles, cleanly welded, with bulk material-repellent upper frame profile. Interior has a step-up at the front wall (not in combination with Cramaro). Shovel and broom holders outside on the front wall. Ncedpfx Asi Riz Rok Ssr Greenline – conical and aerodynamic body shape Membrane rear wall Rear wall as pendulum tailgate with double-joint hinge, external mounting with double hook locking. Rear wall with rubber seal. Note! Heat resistant up to max. 170°C! Floor seamlessly 6 mm thick Standing platform with step-up, connection plate for air/electrical and brake lines with generous clearance for optimal operability. Roll tarpaulin stows to FR-right, with central locking at FR-left Operating Information For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent material degradation and rust. The stated total weight is technically possible. Depending on the cargo, the total weight may not be achievable while complying with permissible axle, support, and kingpin loads. (Poor driving or tracking behavior due to incorrect load distribution possible.) Registration Country / Plates Germany Approval according to EC 2007/46 24/7 Service Hotline Prepared for single-line license plate holder Contour markings with reflective tape according to ECE R 048, white on the side and red at the rear Paintwork Frame DB 7350 Nova Grey 10 years

Durumu: yeni, makine/araç numarası: 6e7907b4000c16661fa1c8a1f, boş ağırlık: 4.150 kg, azami yük ağırlığı: 30.850 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further information Chassis Semi-Trailer Tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front section, patented without landing gear Wheel chocks with holder Foldable underride guard Half-shell mudguards Integrated mudguard holder, stone-repellent surface Towing hook at rear Axles & suspension SAF disc brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and traction aid, operated by activating brakes 3x (traction aid functional up to an axle overload of 30% and up to a max speed of 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against corrosion Brake system 2-line compressed air brake system, color-coded piping for easy service. Spring-loaded parking brake 2 anti-swap couplings at the front, without connecting line EBS, electronic braking system with EBS socket at front, without connection cable Note: The trailer may only be towed by tractor units that guarantee effective ABS functionality! With raise & lower valve Vehicle stability control system Wheels and tires 385/65 R22.5, manufacturer at the discretion of the builder Polished aluminum rims, manufacturer at the builder’s discretion Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK threaded coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO Body Aluminum box body made of high-quality, wear-resistant alloy, front wall 5 mm thick, outer walls made of 30 mm hollow chamber profiles, neatly welded, outer upper edge with bulk material-repelling profile. Interior with access ladder at the front wall (not in combination with Cramaro). Nsdpfxji Ri Are Ak Sscr Shovel and broom holder on the outside of front wall. Greenline – conical and aerodynamic body shape Membrane – tailgate Tailgate as pendulum flap with double-joint hinge, mounted outside with 2-hook locking system. Tailgate with rubber seal. Note! Heat resistant up to max. 170°C! Continuous 5 mm thick floor, Brinell 110. Note! Only for transporting sand, chippings, and round gravel with a max. grain size up to 20 mm! Warranty does not apply to any other goods! Standing platform with access, connecting plate for air/electrical and brakes with ample space for optimal operation. Roll-up tarpaulin, stashable to FR-right, with central locking on FR-left Operating instructions For transports of salt, lime, etc., we recommend a tipper cylinder with a hard-chromed piston rod to prevent material-induced corrosion. The specified gross vehicle weight is technically possible; depending on load, permissible axle, support, and fifth wheel loads may restrict achievable total weight. (Poor driving and trailing performance possible due to incorrect load distribution) Revolution Link: Revolution Link User Review: Registration Country / Plates Germany With Dekra inspection and report (in accordance with §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape in accordance with ECE R 048, white on the sides, red on the rear Paintwork Frame DB 7350 Nova Grey Body R

Durumu: yeni, makine/araç numarası: 8e6cf81e11b107f23f22f209a, dingil konfigürasyonu: 3 dingil, lastik boyutu: 435/50 r19.5, Further Information Fine-grained steel welded construction, with preload light pretensioning in the neck area, fifth wheel plate with interchangeable 2" kingpin, outer frame slightly bevelled, new version with load-lock profile for lashing strap attachment, 24 t two-speed landing gear, one-sided operation, with straight lower section, without thrust compensation. Note: Free support leg clearance or free pivot radius to the rear approx. 1930 mm, sliding ladder at the rear, lateral door retainers, 2 chocks with holders, aluminium side underrun protection, galvanised steel rear underrun protection, quarter-shell mudguards in front of the first axle and behind each axle, with anti-spray mud flaps according to EC standards, rear impact protection. SAF disc brake axles, axles/chassis laser-aligned to reduce tyre wear and fuel consumption, air suspension. 2-line compressed air braking system, colour-coded line installation for easy service, spring-type parking brake, 2 polarity-safe coupling heads at the front, without connecting line, EBS electronic braking system with EBS socket at the front, without connection cable. Note: The trailer may only be towed by tractor units which ensure the effectiveness of ABS! With lifting & lowering valve, vehicle driving stability system. 435/50 R19.5 tyres, make at manufacturer's discretion, steel rims finished in factory silver. 24 Volt, multi-chamber lights, side yellow LED lighting, 2 white position lights at front, 2 white/red lane-keep lights at rear, two 7-pin polarity-safe sockets at front, without cables. Floor: approx. 30 mm coated plywood, laid on longitudinal cross members for high point load capacity, suitable for fork lift axle load up to max. 7100 kg Front wall / corner stanchions at front: 2, 580 mm high, steel corner stanchions in volume design, release device for curtain at front wall, crash blocker, with lower internal steel impact protection at approx. 140 mm height. Centre stanchions: 3 pairs of sliding stanchions along the full length, with quadruple stake pockets and long bottom pocket, 3 pairs of stanchion positions Slats: 5 rows of wooden drop-in slats. Rear wall / corner stanchions at rear: Rear corner stanchions steel up to lower edge of roof, attachment for curtain with round tube and tensioning ratchet, two-wing rear portal doors with two internal lock rods each. Curtain: Curtain with welded-in horizontal and vertical straps, tensioning fasteners made of stainless steel Roof: Sliding roof, rear end-lift foldable, roof sliding from back to front, L-roof rail for automotive industry, internal width between roof rails approx. 2490 mm, curtain colour: white, 400 Roof non-elastic, minimal sagging of roof rail during loading/unloading, optimal rain gutter at the rear (on top of end stanchion, above doors), EcoLift - lift roof can be raised by approx. 380 mm, with gas strut assistance, 3 driving positions at the front: internal height front approx. 2900mm / 2950 mm / 3000 mm, set to approx. 3000 mm Ncsdji Ri E Hepfx Ak Sjr Germany, Type approval according to EC 2007/46, 24/7-service hotline, Fliegl manufacturer certificate for body stability according to EN 12642 XL, prepared for single-line number plate holder, warning sign according to ECE-70, reflective stripes: white, continuous on lower side curtain and in corners at the top (when visible side walls, stripe at the bottom on side wall), reflective stripes: red, surrounding the rear portal. Frame DB 7350 novagrau, 10 years corrosion warranty, landing l

Durumu: yeni, makine/araç numarası: 068983c41e44eb5660fa9100c, boş ağırlık: 6 kg, azami yük ağırlığı: 28 kg, toplam ağırlık: 35 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 435/50 r19,5, Further Information Chassis Semi Logistics Fine-grained steel welded construction with preload slight pre-tension in the neck area, fifth wheel plate with replaceable 2" kingpin X-tra Long, with 15,030 mm internal length Slightly sloped new outer frame version with load-lock profile for attaching lashing straps 24 t 2-speed landing gear, single-side operation, with straight lower part, without compensating foot Note: Free support leg corner dimension or clear rear swing radius approx. 1,930 mm Pull-out ladder at the rear Side door holders 2 wheel chocks with bracket Side underrun protection aluminium Rear underrun protection galvanized steel Quarter mudguards in front of first axle and behind each axle Rear impact protection Axles + Suspension SAF disc brake axles Axle/chassis laser measured to reduce tire wear and fuel consumption Air suspension Brake System 2-line compressed air brake system Color-coded line arrangement for easy service. Spring-loaded parking brake 2 foolproof coupling heads at front, without connection line EBS, Electronic Braking System with EBS socket at front, without connecting cable Attention: The trailer may only be towed by tractor vehicles that ensure the effectiveness of the ABS! with lift & lowering valve Vehicle - Driving Stability System AAC Basic, automatic axle lift on the last axle as a maneuvering aid, active up to 20 km/h, can be deactivated manually Axle load detection via EBS canbus signal, for display on the in-cab monitor, truck must be correspondingly equipped, no installation (not a calibrated scale) Wheels and Tires 435/50 R19.5, brand as selected by manufacturer Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED side marker lights Yellow LED side marker lights with flashing function, connected with indicator 2 white position lights at the front 2 white/red lane control lights at the rear 2 x 7-pin foolproof sockets at front, without connection cable Floor Antislip phenolic plywood floor approx. 30 mm thick, on long longitudinal beams for high point load capacity for fork-lift axle load up to max. 7,100 kg Front wall / front corner stanchions 2,580 mm high, steel corner stanchions, volume construction, release mechanism for side curtain at front wall, crash blocker, inner lower section with steel bumper at approx. 140 mm height Middle stanchions 3 pairs of sliding stanchions, fully adjustable lengthwise, with four insertion pockets and long pocket below. 3 pairs of stanchion positions Insert slats 5 rows of wooden insert slats Rear wall / rear corner stanchions Rear steel corner stanchions up to lower edge of roof, hooks for curtain with round tube and tension ratchet Double-wing rear portal doors with 2 internal locking rods each Tarpaulin Tarpaulin with welded horizontal and vertical straps Tension locks made of stainless steel Roof Sliding roof, rear end-lift foldable, roof slides from rear to front, L-roof beam for automotive industry, internal width between roof beams approx. 2,490 mm, tarpaulin color: white Non-elastic roof, minimal roof beam sag during loading and unloading Ncsdpfxoi Riwue Ak Sjr EcoLift - lifting roof can be raised approx. 380 mm on both sides, with gas pressure strut support, 3 ride heights at front: Internal height at front approx. 2,900 mm / 2,950 mm / 3,000 mm, adjusted to approx. 3,000 mm Optimized rain gutter at rear, at upper end cross member, above doors Operating Notes Special permit required if overall train length exceeds 16,500 mm. When arrangi

Durumu: yeni, makine/araç numarası: abc6276e1749f9dddc494eb32, boş ağırlık: 4.900 kg, azami yük ağırlığı: 30.100 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22,5², Further Information Chassis Semi-Trailer Tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with interchangeable 2-inch kingpin Curved front wall patented telescopic support centrally mounted, uncoupling while loaded not possible; when uncoupled, the vehicle must be positioned with a rear tilt. 2 wheel chocks with holders collapsible underrun protection half-shell mudguards integrated mudguard holder with stone-repellent surface equipped with anti-spray mud flaps only on the rearmost axle 1 tarp rod with holder 2 tow hooks at rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter axle/chassis laser measurement to reduce tire wear and fuel consumption axles in off-road version, air suspension 1st axle automatic lift axle, including forced lowering and start-up aid, activated by 3x brake application (start-up aid operates until axle overload exceeds 30% and up to a maximum speed of 25 km/h) hot-dip galvanized lift axle mechanism, 10-year corrosion warranty Braking System 2-line compressed air braking system, color-coded piping for easy servicing. spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractors capable of ensuring proper ABS functionality! with raise & lower valve Vehicle stability system Automatic tipping lowering with shut-off valve Wheels and Tires 385/65 R22.5, make at manufacturer's discretion steel rims, factory silver Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lamps at front 2 white/red outline marker lamps at rear 2 x 7-pin non-interchangeable sockets at front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupler, fixed part, nominal width 48 mm (without hose connection) hydraulically operated via truck PTO tipper bodies aluminum box body made from high-quality, wear-resistant material, front wall 5 mm thick, with external side walls of 30 mm hollow-chamber profiles, neatly welded, with bulk material-repellent upper rail profile. Internal access steps on front wall (not in conjunction with Cramaro). External scoop and broom holder on front wall. Greenline – conical and aerodynamic body design Membrane – rear wall Rear wall as pendulum flap with dual-hinge, externally mounted with double hook locking. Rear wall with rubber seal Note! Heat resistant up to max. 170°C! Floor 6 mm throughout Platform with access, connection plate for air/electrics and brakes, providing ample space for optimal operability. Roll tarp deposited on passenger side, with central locking on driver’s side Operating Notes For transporting salt, lime, etc., we recommend a tipper cylinder with a hard-chromed piston rod to prevent damage and corrosion by the material. The specified gross weight is technically feasible; depending on cargo, the gross weight may not be achieved within the permissible axle/support and fifth wheel loads. (Poor driving and tracking behavior may result from incorrect load distribution) Approval / Plates Germany Approval per EC 2007/46 24/7 service hotline preparation for single-line license plate holder Ncsdpfei Ri H Iex Ak Sor contour marking with reflective tape per ECE R 048, white sides and red rear

Durumu: yeni, makine/araç numarası: 074630ca1b8dc2d710f82c15a, boş ağırlık: 3.980 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further Information Chassis Semi-Trailer Tipper Fine-grained steel welded construction in lightweight design, kingpin plate with interchangeable 2-inch kingpin Patented curved front wall Without landing leg Wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard brackets with stone-repellent surface Tow hook at the rear Axles & Suspension SAF disc brake axles Axles/chassis laser aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, activation with triple brake application (starting aid is functional up to 30% axle overload and up to a maximum speed of 25 km/h) Hot-dip galvanized lift axle mechanism with 10 years’ warranty against corrosion Brake System 2-line compressed air braking system, color-coded line routing for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! With lift and lowering valve Vehicle driving stability system Wheels and Tyres 385/65 R22.5, make at manufacturer’s discretion Polished aluminum rim, make at manufacturer’s discretion Electrics 24 volt, multi-chamber lights, LED side marker lights (amber) 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupler, fixed part, NW 48 mm (without hose connection) Operated hydraulically via PTO on truck Body Aluminum box-body, made of high-quality, wear-resistant material; front wall 5 mm thick, with external end walls made of 30 mm hollow chamber profiles, precisely welded, with top rail profile deflecting loose material. Inside: ladder/access at front wall (not for use with Cramaro). External holder for shovel and broom at the front wall. Greenline – conical and aerodynamic body design Membrane-type rear wall Rear wall as pendulum flap with double joint hinge, mounted externally with double hook locking Rear wall with rubber seal (Note: Heat resistant up to 170°C max!) Continuous floor 5 mm thick, Brinell hardness 110 Note: Only suitable for the transport of sand, gravel, and round gravel with max. grain size 20 mm! All other transported goods are excluded from warranty! Standing platform with access, connection plate for air/electric and brake with large clearance for optimal operation Sliding tarp, single-sided folding to FR-right, with central locking in FR-left Operating Instructions Nodpfei Ri H Ssx Ak Sjcr For transportation of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent material corrosion and rusting. The stated total weight is technically possible; depending on the load, the total weight may not be achievable due to permitted axle, support, and fifth wheel loads. (Poor driving and tracking behavior possible with incorrect load distribution.) Revolution Link: Revolution Link User Review: Registration Country / Plates Germany With DEKRA inspection and certificate (acc. to §13 EC-FGV) 24/7 Service hotline Prepared for single-line license plate holder Conspicuity marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Novagrau Body: R

Durumu: yeni, makine/araç numarası: 45d76d32267904923b7adcdea, boş ağırlık: 4.980 kg, azami yük ağırlığı: 30.020 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further Information Chassis and Semi-Trailer Tipper Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin Patented curved front bulkhead 24 t, 2-speed landing gear, operated from one side, with straight lower part, without thrust compensation Wheel chocks with holder Collapsible underrun protection Half-shell mudguards Integrated mudguard brackets with stone-repellent surface Tow hook at the rear Axles and Suspension SAF disc brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, activated after 3x braking (starting aid functions up to a 30% overload on the axle and up to a maximum speed of 25 km/h) Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty Brake System 2-line compressed air brake system; color-coded line layout for easier maintenance Spring-loaded parking brake 2 interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at front (no connecting cable) Note: The trailer may only be towed by towing vehicles that ensure proper ABS functionality! With raise/lower valve Vehicle stability system Wheels and Tires 385/65 R22.5—manufacturer at the manufacturer's discretion Polished aluminum wheel rims—manufacturer at the manufacturer's discretion Ncodpji Ri Idofx Ak Sjr Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin sockets at the front, no connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard chrome plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Body High-quality, abrasion-resistant aluminum box body, front wall 5 mm thick, external hollow-chamber side walls, 30 mm profile, precisely welded, with spill-repellent upper rail profile. Internal access ladder at the front wall (not in combination with Cramaro). Shovel and broom holder outside on the front wall Greenline – conical and aerodynamic body shape Membrane rear wall Rear wall as swinging gate with double-joint hinge, external with double hook lock Rear wall with rubber seal Note! Heat resistant up to max. 170°C! Floor fully 5 mm thick, Brinell hardness 110 Note! Only suitable for transport of sand, grit, and gravel with max. grain size up to 20 mm! Any other loads are excluded from warranty! Standing platform with ladder, connection plate for air/electrics and brake with large clearance for optimum operability Roll tarp can be parked on RH side with central locking on LH side Operating instructions For transports of salt, lime, etc., we recommend a tipper cylinder with hard-chrome plated piston rod to prevent corrosion due to material contact. The specified gross weight is technically feasible; depending on the cargo, the gross weight may not be achievable due to permissible axle/support/fifth wheel loads (poor stability or tracking behavior possible due to incorrect load distribution) Revolution Link: Revolution Link Review: Country of Registration / License Plates Germany With Dekra inspection and report (according to §13 EC-FGV) 24/7 Service Hotline Prepared for single-line license plate holder Conspicuity marking with reflective tape according to ECE R0

Durumu: yeni, makine/araç numarası: f80f2330e1318ef03bc20755e, boş ağırlık: 3.200 kg, azami yük ağırlığı: 35.800 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further information Fine-grained steel welded construction in lightweight design, fifth-wheel plate with replaceable 2" kingpin, only 2 longitudinal members as double-T-beams for subsequent mounting of a headboard rack at the front in the new/current design, outer frame slightly angled with load-lock profile for lashing strap attachment. Note! In order to attach straps in conjunction with drop sides, the sides must be opened! 24 t, 2-speed landing gear with single-sided operation, straight base, without slide compensation, wheel chocks with holders, foldable aluminium side underrun protection, extendable galvanized steel rear underrun protection, half-shell mudguards - loose, not installed!, with anti-spray flaps behind each axle, 1 plastic water tank, capacity approx. 30 l, installed on the left (direction of travel). BPW disc brake axles with 430 mm disc diameter, axles/chassis laser aligned to reduce tyre wear and fuel consumption, air suspension, first axle with automatic lift axle, additionally manually lowerable, operable via push button on the vehicle. 2-line air brake system, with 1 standard central air reservoir, spring-loaded parking brake, 2 interlock-safe coupling heads at the front, without connecting line, EBS (Electronic Braking System) with EBS socket at the front, without connection cable, EBS 2S/2M, test connection for brake cylinder pressure leading outside on the EBS module. Attention: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! With lifting and lowering valve, control unit + brakes integrated in the frame as with tipper semi-trailers, mounted in front of the axles. Brake lining wear indicator on disc brakes via ABS/EBS lamp on the truck. 385/65 R22.5 Continental make, steel rims, factory silver. 24-volt multi-chamber lights, side-mounted yellow LED lighting as on tipper semi-trailers, 3,000 mm width must be observed, 2 front white position lights in LED, loose, 2 white/red lane marker lights at the rear, 2 x 7-pin interlock-safe sockets at the front, without connecting cable. Germany, approval to EC 2007/46 for complete vehicle, 24/7 service hotline, prepared for double one-line license plate holder: 1 x plastic and 1 x stainless steel interchangeable holder. Warning panel according to ECE-70, aluminium, loose, EBS, safe parking, without contour marking / reflective tape according to ECE R 048. Ncsdpji Riwqsfx Ak Ssr Frame: DB 7350 Nova Grey, Landing legs: black coated. Immediately available!

Durumu: yeni, makine/araç numarası: d9c951d746f03c05bc5470f89, boş ağırlık: 5 kg, azami yük ağırlığı: 29.045 kg, toplam ağırlık: 35 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further Information Chassis Semi-Trailer Forwarding Fine-grain steel welded construction, fifth-wheel plate with interchangeable 2-inch kingpin Vario stanchion system 4 pairs recessed into the loading area, collapsible to 2,100 mm and extendable to approx. 3,500 mm for loading. Stanchions can be locked at 100 mm intervals for an internal width of 2,100 mm to 3,000 mm, 4 pairs of divisible stanchions 600 mm + 1,200 mm, total height 1,800 mm, removable. For an internal stanchion width above approx. 2,350 mm, oversize width. Vario bulkheads Floor prepared for the installation of 3 bulkheads. 4 x 5 pairs of Vario stanchion pockets for plug-in bulkheads (front and rear respectively), and 1 x 3 pairs each in the center for transporting welded mesh of 2 x 5,000 mm or 2 x 6,000 mm 2 Vario bulkheads, each consisting of 1 pair of plug-in stanchions and 1 crossbeam at the top approx. 2,200 mm wide. Crossbeam extendable by 220 mm on each side, with lashing hole for securing. Height of Vario bulkhead approx. 1,900 mm, adjustable to 1,300 mm or 700 mm. 4 stanchion pockets recessed in the center of the floor for 80 x 80 mm plug-in stanchions 1 pair of supports at the bottom for front Vario bulkhead 1 pair of supports at the bottom for rear Vario bulkhead Outer frame with slight incline, with Load-Lock profile for lashing strap hooks 14 additional pairs of lashing eyes recessed in the outer frame, 5 tons each 24 t, 2-speed landing gear, single-side operation, with straight lower section, without compensating device Pull-out ladder at rear Wheel chocks with holder Aluminum side underrun protection Galvanized steel rear underrun protection Quarter fenders in front of and behind the axle assembly With anti-spray mud flaps only on the last axle Rear impact guard 8 construction steel winches with wire rope and counter hooks, 4 left and 4 right, with wire rope routing through the outer frame, 1 removable plug-on transmission for construction steel winches – supplied loose (without frame mount) Nedpfji Ri R Djx Ak Socr 1 spare wheel holder for 1 E-wheel, with wheel fastener set 1 plastic toolbox, with drawer and shelf, w=650 / h=520 / d=670 mm, can be locked with a padlock (lock not included) 1 stanchion storage box closed, open at the top, below the loading area, doors on both sides, w=450 mm / h=400/420 mm / d=2460 mm 4 lashing/stanchion rails set transversely in the floor across the full width to the outer frame (max. usable internal width between the outer plug-in stanchions approx. 2,170 mm), approx. 100 mm high. With 20 mm round steel bars, top and bottom, spaced approx. 60 mm apart (of the round steel). Bottom finishes with angle steel, half open downwards. For lashing and plugging in 80 x 80 mm stanchions. Note: Stanchion pockets/plug-in stanchions are not designed solely for securing long loads, pipes, etc. without lashing Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser aligned to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, activated by braking 3x (starting aid works up to 30% axle overload and up to a max speed of 25 km/h) Axle lift below the recommended driving height, therefore no warranty for tire damages Brake system 2-line compressed air brake system, color-coded line routing for easy service Spring-actuated parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at front, no c

Durumu: yeni, makine/araç numarası: 357314e4e176f8758d11ba42b, boş ağırlık: 4.500 kg, azami yük ağırlığı: 30.500 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further Information Chassis Semi-Trailer Tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with interchangeable 2-inch kingpin Curved front wall patented telescopic support centrally mounted, uncoupling while loaded not possible; when uncoupled, the vehicle must be positioned with a rear tilt. 2 wheel chocks with holders collapsible underrun protection half-shell mudguards Nedpfx Aei Ri R Isk Socr integrated mudguard holder with stone-repellent surface equipped with anti-spray mud flaps only on the rearmost axle 1 tarp rod with holder 2 tow hooks at rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter axle/chassis laser measurement to reduce tire wear and fuel consumption axles in off-road version, air suspension 1st axle automatic lift axle, including forced lowering and start-up aid, activated by 3x brake application (start-up aid operates until axle overload exceeds 30% and up to a maximum speed of 25 km/h) hot-dip galvanized lift axle mechanism, 10-year corrosion warranty Braking System 2-line compressed air braking system, color-coded piping for easy servicing. spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractors capable of ensuring proper ABS functionality! with raise & lower valve Vehicle stability system Automatic tipping lowering with shut-off valve Wheels and Tires 385/65 R22.5, make at manufacturer's discretion steel rims, factory silver Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lamps at front 2 white/red outline marker lamps at rear 2 x 7-pin non-interchangeable sockets at front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupler, fixed part, nominal width 48 mm (without hose connection) hydraulically operated via truck PTO tipper bodies aluminum box body made from high-quality, wear-resistant material, front wall 5 mm thick, with external side walls of 30 mm hollow-chamber profiles, neatly welded, with bulk material-repellent upper rail profile. Internal access steps on front wall (not in conjunction with Cramaro). External scoop and broom holder on front wall. Greenline – conical and aerodynamic body design Membrane – rear wall Rear wall as pendulum flap with dual-hinge, externally mounted with double hook locking. Rear wall with rubber seal Note! Heat resistant up to max. 170°C! Floor 6 mm throughout Platform with access, connection plate for air/electrics and brakes, providing ample space for optimal operability. Roll tarp deposited on passenger side, with central locking on driver’s side Operating Notes For transporting salt, lime, etc., we recommend a tipper cylinder with a hard-chromed piston rod to prevent damage and corrosion by the material. The specified gross weight is technically feasible; depending on cargo, the gross weight may not be achieved within the permissible axle/support and fifth wheel loads. (Poor driving and tracking behavior may result from incorrect load distribution) Approval / Plates Germany Approval per EC 2007/46 24/7 service hotline preparation for single-line license plate holder contour marking with reflective tape per ECE R 048, white sides and red rear

Durumu: iyi (kullanılmış), Kod: 0409 Marka: THEOREMA Model: BR 3000 SPECIAL - CE Standardı Mobilya, mutfak, banyo mobilyası, panel, kapı ve çeşitli ürünler için 3 kontrollü eksenli CNC delme ve pantograf çalışma merkezi - CE standardı Teknik veriler: Minimum genel boyutlar Kullanılabilir uzunluk X ekseni mm 3000 Kullanılabilir uzunluk Y ekseni mm 1300 X ekseni hızı mt/dak 24 Y ekseni hızı mt/dak 24 Z ekseni stroku mm 65 Maksimum panel kalınlığı mm 65 18 mil sayısına sahip delme ünitesi - Sağ-sol matkap ucu çapı mm 10 - Rpm 4000 Pnömatik alet bırakmalı pantograf - Motor Hp 7,5 - Rpm 0/18000 - Mil için invertör Kw 5,5 Njdpouwdnxjfx Ak Socr Yuvalama çalışma tezgahı Vantuzlar mm 150 x 150 Hızlı panel konumlandırma Delme yolunun optimizasyonu Delme ve frezeleme çevrimlerinin spekülerliği Üç X-Y-Z ekseninde enterpolasyon Vakum pompası metreküp 100 Basınçlı hava atm 6 Genel boyutlar: mm 4400 x 1700 x 2400 h Ağırlık kg 1200 BULUNDUĞU KOŞULLAR ALTINDA SATILAN MAKİNE YENİLENMEMİŞTİR

Üretim yılı: 2014, Durumu: yeni, makine/araç numarası: RE-HU-2014-1603-2, Plaka belirtimi filtre: 390 x 390 mm Filtre uygulama alanı 2.8m2 Filtre plaka 14pcs bir kuyruk plaka ve bir baş plaka dahil olmak üzere Oda plaka sayısı Filtre basınç 0.6-1.6Mpa Filtre keki 25mm kalınlığı Filtre uygulama odası hacmi 35L Filtrate Açık tip çıkış boşaltma İnşaat malzeme için çerçeve Ana malzeme için SS 316 çerçevedir. Karbon çeliği. Parçalar PVC veya SS başvurun. Nodpeb Dluyjfx Ak Socr Malzeme filtresi plaka Malzeme için odası plakadır s Çalışma sıcaklığı < 90 ℃ Genel boyut 1695X750X630mm Ağırlık 610KG Satın almak veya kiralamak: Ek bilgi: Lütfen sipariş önce lütfen, talep çok yüksek olduğu için.

Durumu: kullanılmış, boş ağırlık: 5.800 kg, azami yük ağırlığı: 17.200 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/1984, süspansiyon: çelik, renk: diğer, vites türü: diğer, şoför kabini: diğer, emisyon sınıfı: hiçbiri, 3 dingilli paslanmaz çelik tanker römork - Üretici: T + A Beckum - İlk tescil: 24.04.1984 - Dingil sayısı: 3 - Süspansiyon: yaprak - Dingil tipi: BPW - Fren: kampana - Uzunluk: 10.300 mm - Genişlik: 2.500 mm - Yükseklik: 3.250 mm - Boş ağırlık: 5.800 kg - Üst yapı üreticisi: T+A Beckum - Tank malzemesi: paslanmaz çelik - Toplam tank hacmi: 18.390 L - Tank bölmesi: 3 - İzoleli Ncsdpoxtupwofx Ak Ssr

Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902028370, boş ağırlık: 6.015 kg, azami yük ağırlığı: 28.985 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 04/2021, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 3.000 mm, toplam uzunluk: 13.850 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.030 mm, süspansiyon: hava, lastik boyutu: 435/50 R19,5", renk: siyah, Üretim yılı: 2021, Donanım: EBS (Elektronik Fren Sistemi), Chassis semi-trailer for haulage Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outward frame slightly inclined with “Load-Lock profile” for lashing strap attachment, if fitted to the frame. Note: To hook the straps in combination with side walls, the side walls must be opened! 24 t, 2-speed landing gear, one-sided operation, with straight lower section, without compensation for telescopic movement Note: Free landing gear foot corner dimension or free swing-through radius at the rear approx. 1930 mm, without supports. Extendable ladder at the rear, door retainer to the side 2x wheel chocks with holders Side underrun protection in aluminium Rear underrun guard, galvanized steel Quarter-shell mudguards in front of the 1st axle and behind each axle With anti-spray mudflaps behind each axle Rear buffer, pallet stop on both sides approx. 15–20 mm high, bolted design, reduces loading height by approx. 15–20 mm Plastic toolbox with drawer and shelf, dimensions w=650 / h=520 / d=670 mm, lockable with padlock (padlock not included) Axles & Suspension SAF disc brake axles “Axle/chassis laser alignment”: Reduced tire wear and fuel consumption, air suspension, without lift axle Brake System 2-line compressed air brake system, colour-coded piping for easy servicing. Spring-loaded parking brake 2 fail-safe coupling heads at the front, without coupling line EBS, electronic braking system with EBS socket at the front, no connection cable Note: The trailer may only be towed by tractors that ensure the effectiveness of ABS! With lift & lower valve Vehicle stability control system Wheels and Tires 435/50 R19.5”, tyre brand at manufacturer’s discretion, alternatively 385/55 R19.5 Steel rims, factory silver finish Electrics 24 Volt, multi-chamber lights, amber LED side marker lights 2 white position lights at the front 2 white/red demarcation lights at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connection cables Floor Resin-coated plywood panels approx. 30 mm thick, laid on longitudinal crossmembers for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Body Body mounted Front wall / front corner posts 2,580 mm high, corner posts made of steel in volume design, release mechanism for side curtain at front wall, Njdpfox Sqmrex Ak Socr “Crash blocker”, lower internal, with steel buffer at approx. 140 mm height Centre posts 3 pairs of sliding posts, adjustable along full length, with 4 pocket receptacles each and extended pocket at the bottom 3 pairs of post positions Insert slats 5 rows of wooden insert slats Rear wall / rear corner posts Rear corner posts in steel, up to the lower edge of the roof, curtain rail with round tube and tensioning ratchet Rear portal doors, double-wing, each with two internal locking rods Curtain Curtain with welded horizontal and vertical straps Tensioners made of stainless steel Roof Sliding roof, rear end-lift hinged upwards, sliding from rear to front, L-roof rail for automotive industry, internal width between roof rails approx. 2,490 mm, curtain colour: white Non-elastic roof, minimal bending of roof rail during loading/unloading EcoLift – roof raisable by approx. 380 mm, both sides, with gas strut assistance, 3 driving positions at the front: internal front height approx. 2,900 mm / 2,950 mm / 3,000 mm, factory set to approx. 3,000 mm Optimized rear rain gutter, at top of rear crossmember, above doors

Durumu: işlem için hazır (kullanılmış), Rexroth MAC090C-0-KD-2-C/110-A-0 3 fazlı kalıcı mıknatıslı motor MNR: R911223273 SN:MAC090-93905, kullanılmış, normal kullanım belirtileri, %100 işlevsel, teslimat kapsamı fotoğraflardaki gibidir Njdpfx Akotz Idke Secr

Durumu: işlem için hazır (kullanılmış), Rexroth MAC090C-0-KD-2-C/110-A-1 3 fazlı kalıcı mıknatıslı motor MNR: R911223272 SN:MAC090-93908, kullanılmış, normal kullanım belirtileri, %100 işlevsel, teslimat kapsamı fotoğraflardaki gibidir Nedpfjtz Idqox Ak Sscr

Durumu: işlem için hazır (kullanılmış), Rexroth IndraDrive M HMV01.1R-W0120-A-07-NNNN / MNR: R911312757 Güç kaynağı SN: HMV011-14390, kullanılmış, iyi durumda, %100 işlevsel, teslimat kapsamı fotoğraflardaki gibidir Ncsdpfxou Dtlye Ak Ssr

Durumu: mükemmel (kullanılmış), LDS Çalkalayıcı Özel Burada bir LDS Çalkalayıcı Özel sunuyoruz. Çalkalayıcı Titreşim testleri: Çalkalayıcı - Tip V870-640T Titreşim ve şok direnci için testler kullanım ve taşıma sırasında Titreşimle ilgili malzeme parametrelerinin belirlenmesi Uygulama alanları: Motor bileşenleri, egzoz gazı turboşarjları, araç parçaları, elektronik montajlar. Tip: V870-640T Durum: kullanılmış / kullanım Teslimat kapsamı. (Resimlere bakınız) Ncjdpfx Akjlzhxlj Ssr (Teknik verilerdeki değişiklikler ve hatalar, teknik özellikler saklıdır). Diğer sorularınızı telefonda yanıtlamaktan memnuniyet duyarız.

Durumu: kullanılmış, kilometre: 659.549 km, güç: 390 kW (530,25 bg), ilk tescil: 10/2022, yakıt türü: dizel, koltuk sayısı: 79, vites türü: otomatik, emisyon sınıfı: Euro 6, renk: diğer, frenler: retarder, Üretim yılı: 2022, Donanım: ABS, hız sabitleyici, klima, = Additional options and equipment = - DVD player - Front refrigerator - Retarder - Sleeper cab - Toilet - USB connections - USB connections - Webasto auxiliary heater = Further information = Nodpfx Ajx Nh T Dek Socr Height: 400 cm Damage: none = Company information = We are an international company based in Belgium, located approximately 20 km from Brussels. Belgian Bus Sales is your ideal partner for purchasing and selling used buses and has an extensive yard that serves as a display area. We always have a large selection of buses from all brands, capacities, models, and across every price range in stock. We can help you find the right touring, school, or city bus to match your needs and budget. All information provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Viewing times for used buses: Mon-Fri: 08:30 am - 12:00 pm, 12:30 pm - 5:00 pm. Mówimy po polsku (Agata). We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Durumu: işlem için hazır (kullanılmış), Heidenhain UVR 140D ID: 390 281-01 SN26241696T – denetim protokolü ile, profesyonelce tamamen yenilenmiş ve test edilmiş, 6 ay garanti ile, %100 çalışır durumda, teslimat kapsamı fotoğraflara uygundur. Dikkat: Takas işleminde, arızalı değişim parçanızda kırık gibi mekanik hasarlar bulunmamalıdır, çünkü bunlar onarılamaz. Bu durumda, 1000 € (KDV dahil) ek fatura düzenlenecektir. Ncsdpfx Akox Etr Dj Sjr Dikkat: Heidenhain'den bir inverter (Heidenhain UVR 140D 390 281-01 SN26241696T) için takas (Exchange Service) teklifindesiniz, profesyonelce tamamen yenilenmiş ve test edilmiş, 6 ay garanti ile, %100 çalışır durumda, teslimat kapsamı fotoğraflara göre. Hem tamir hem de değişim işlemlerinde, arızalı değişim parçanızda kırık gibi mekanik hasarlar bulunmamalıdır, çünkü bunlar artık onarılamaz. Bu durumda, 1000 € (KDV dahil) ek fatura düzenlenir.

Durumu: işlem için hazır (kullanılmış), Heidenhain UVR 140D ID: 390 281-01 power supply unit SN: SN26241696T – with test protocol, professionally completely overhauled and tested, comes with 3 months warranty, 100% functional, scope of delivery as per photos. Nedex Etr Ropfx Ak Sscr

Durumu: işlem için hazır (kullanılmış), Heidenhain UVR 150D ID: 390 421-01 Güç Kaynağı Ünitesi SN: 26825548P, profesyonel olarak tamamen yenilenmiş ve test edilmiştir, 6 ay garanti ile %100 çalışır durumda, teslimat içeriği fotoğraflara uygundur. Dikkat: Takas işlemi kapsamında, arızalı değişim parçanızda kırılma gibi mekanik hasar bulunmamalıdır, çünkü bu tür hasarlar artık tamir edilemez. Bu durumda, KDV dahil 1000,- € ek fatura kesilir. Dikkat: Heidenhain UVR 150D 390 421-01 SN26825548P invertörü için değişim yöntemi ile teklif veriyorsunuz (Değişim servisi), 6 ay garantili, profesyonelce tamamen yenilenmiş ve test edilmiş, %100 çalışır durumda, teslimat içeriği fotoğraflara uygundur. Onarım ve değişim işlemlerinde, arızalı değişim parçanızda kırılma gibi mekanik hasar olmamalıdır. Bu durumda, KDV dahil 1000,- € ek fatura düzenlenir. Nsdpfx Aex Etufsk Socr