Kullanılmış Hapro Abrasiv Förderer satın al (203)

Koşul: yeni, Üretim yılı: 2026, Shot blasting abrasive feed screw 5m with metering cover For installation as a cross conveyor screw to the bucket elevator at the end of the hall (inserting abrasive across the full hall width with a forklift). - 5m plus outlet to the bucket elevator, solid flight screw Ø250mm with 5mm thick screw blades. - Can be used as an abrasive storage hopper. Shot blasting system draws media automatically via level sensor as needed. - Depending on installation depth, up to 24 hours of continuous blasting without cleaning the hall required. - Hall cleaning in 10 minutes using forklift or wheel loader. - Very low maintenance and repair costs compared to a complete conveyor floor. - Particularly suitable for very heavy workpieces. - Lower acquisition costs compared to a fully covered conveyor floor. - Lower foundation costs compared to a fully covered conveyor floor. - Can be inserted across the entire hall width, unlike a sweep pit. Redpfxsynz Ids Ak Nst - Very high temporal warranty.

Koşul: yeni, Üretim yılı: 2026, 200L mobile pressure blasting pot, suitable for construction sites or stationary use. Fittings are safely mounted under the handle. Ideally suited for robust construction site applications. comprising: - 200L pressure vessel - Pre-screen - Weather protection lid - Water separator Rjdpfx Aoynr E Tok Not - Pressure regulator - Adjustable conveying air (airflow for pot and blast hose) - Blast hose Ø25mm, 10m - Venturi blast nozzle Ø8mm (air consumption at 6 bar approx. 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blast helmet Safety equipment: - Dead man's switch with control cable - Remote-controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with bucket and lid adapter for several hours of blasting without refilling - etc. Made in Germany

Koşul: yeni, Üretim yılı: 2026, 140L mobile pressure blasting pot for construction site or stationary use. Fittings securely mounted under the handle. Ideally suited for robust construction site applications. Includes: - 140L pressure vessel - Pre-filter sieve - Weather protection cover - Water separator - Pressure regulator - Adjustable conveying air (airflow regulation for pot and blast hose) - Blast hose Ø25mm, 10m - Venturi blast nozzle Ø8mm (Air consumption at 6 bar: approx. 3.57 m³/min) - Abrasive mixing valve, Y-piece, rubberized for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Rodpfeynr E Hsx Ak Net Safety features: - Dead-man switch with control cable - Controlled quick air release Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with Hobbock and lid for extended blasting without refilling - etc. Manufactured in Germany.

Üretim yılı: 2022, Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Waterjet Cutting Machine ATMS 2015-B – Commissioned 03/2022 – Unused Rsdpox Rqycjfx Ak Nst For sale: ATMS WaterJet 2015-B waterjet cutting machine with a working area of 2000 × 1500 mm. The machine was purchased new and installed in March 2022. Acquired with EU funding for laboratory use, but has only been used once during installation testing. Actual machine runtime is 5 working hours. Reason for sale: We specialize in research and prototype development. It has proven significantly easier and cheaper to cut metal using other equipment. Technical condition: • Very good technical and visual condition • Machine is complete • Stored in industrial environment • Full technical documentation available Basic technical specifications: • Working area (X × Y): 2000 × 1500 mm • Z-axis range: 200 mm • Nominal power: 37 kW, 400 V / 50 Hz • Maximum pressure: 410 MPa (60,000 psi) • Drives: servo motors • Control system: CNC (NC-Studio, PC with Windows) • File formats: G-code, dxf, nce, nc, cnc • Max X/Y feed rate: 15,000 mm/min • Cutting speed: 10,000 mm/min • Automatic abrasive feeding system (200 l) • Laser positioning system • Manual cutting head angle adjustment up to 45° • Water treatment system • Oil cooling system with fans Price: negotiable Location: Poland / Mazowieckie

Koşul: yeni, Üretim yılı: 2025, çalışma saatleri: 4 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 07-262-01, Donanım: dokümantasyon / kılavuz, New Asco Jet 1701 Including nozzle case. Redpfxoyfmcbe Ak Njt For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold come with a 1-year warranty. Repairs and maintenance of Cold Jet machines. We also supply new machines. Contact us. Worldwide Shipping. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Koşul: iyi (kullanılmış), Üretim yılı: 2006, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: PS-6-B, Carlo Banfi PS-6-B Hook Shot Blasting Machine, industrial plant for shot blasting and surface cleaning of metal components. A robust and reliable machine, suitable for intensive work cycles, complete with blasting cabin, blast wheels, abrasive recovery and separation system, dust extraction, and electrical control panel. Ideal for processing mechanical parts, castings, metal structures, and industrial components. Main features • Rotary hook shot blasting machine • Blasting cabin with wear protection • High-performance blast wheels • Abrasive recovery, separation, and recirculation system • Dust extraction and filtration system • Complete electrical control panel with controls and instruments • Heavy-duty structure for continuous industrial use Equipment included • Blasting cabin Rodpfx Aex Timyjk Nst • Hook suspension and handling system • Blast wheels • Extraction system • Electrical control panel Machine condition • Used • In good general condition • Transport at buyer’s expense CURRENTLY DISMANTLED AND NOT IN OPERATION Location: Solbiate Arno (VA), Italy Further details, additional photos, and on-site inspections available on request.

Koşul: yeni, Üretim yılı: 2026, Take advantage of our portfolio of plastic abrasive media for processing softer materials such as brass, copper, or aluminum. Plastic abrasives provide a gentler and more careful surface treatment. Like ceramic abrasives, plastic abrasive media are available in a wide range of grit sizes, shapes, and dimensions. Tailored to your specific workpieces, we will determine the optimal abrasive medium for your process. Overview of various shapes and their properties: - Cones (K) feature significant weight and thus achieve a high material removal rate. The rounded shape ensures gentle processing. - Pyramids (P) are ideal for deburring operations thanks to their edges. Their pointed form enables the abrasive media to reach difficult areas, such as bores. - Tridents (DZ) are particularly well suited for processing complex components, such as gear parts or workpieces with slots. - Paraboloids (PA): Similar to the cone, the paraboloid’s rounded shape is especially effective for smoothing and polishing. Workpieces are processed evenly and gently. - Lenses (L) are suitable for soft materials due to their lower inherent weight, delivering a smooth and uniform material removal. - Wedges (K): Their versatile geometry makes them excellent abrasive media for deburring. Their pointed form also allows them to reach hard-to-access slot areas. - Tetrahedrons (T) operate similarly to pyramids and, owing to their edges, are highly effective for deburring. Their more pointed corners allow better access to complex structures. Rsdpfxsyq N S Ne Ak Net As an experienced partner, we provide expert knowledge in the field of mass finishing. Together with you, we develop effective solutions for optimal process results. If you are interested, we look forward to hearing from you. We will be happy to provide you with non-binding advice. The European Commission provides a platform for online dispute resolution (ODR platform). This offer solely serves as an online presentation of our products. Contract negotiations are conducted via telecommunication (e-mail, telephone, messaging portal). As an initial step, we will send you a non-binding offer, which will also include our general terms and conditions with legal notice and details on your right of withdrawal, prior to any purchase or contract conclusion.

Koşul: yeni, Üretim yılı: 2026, Discover our extensive range of high-quality, cost-efficient ceramic abrasive media for processing workpieces made of steel, stainless steel, or other hard materials. Ceramic abrasive media are distinguished by their exceptional durability. Ceramic abrasive media are particularly suitable for processing hard materials such as steel, but they are also effective for deburring aluminum parts. Thanks to their higher weight, they exert greater pressure on the workpieces, ensuring excellent grinding performance. Compared to plastic abrasive media, they offer significantly higher longevity and cost efficiency. Rsdpfxoyq N N Io Ak Not When selecting the right abrasive media, it is crucial to choose the optimal configuration in terms of abrasive performance, surface finish, geometry, and size. - Triangles & Bevel-cut Triangles (D & DS): The edges make them ideal for deburring and reaching complex areas on workpieces. - Tridents (DZ): Suitable for hard-to-reach areas such as grooves or gear wheels. - Cylinders & Bevel-cut Cylinders (Z & ZS): Their round shape makes them ideal for uniform surface finishing, such as in polishing processes. Their slim design also makes cylinders particularly easy to separate. - Ellipses & Bevel-cut Ellipses (E & ES): Also suitable for polishing and smoothing operations and, thanks to their corners, can reach deeper areas on workpieces. - Angles (W): Combine the advantages of triangles and tridents; their 'wings' allow access to complex areas, while their edges and compact size make them ideal for deburring and exerting good pressure on the workpiece. As an experienced partner, we provide expertise in all aspects of vibratory finishing. We work closely with you to develop efficient solutions for optimal process results. If you are interested, we look forward to hearing from you. We are happy to offer you professional and non-binding advice. The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This offer serves exclusively as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, phone, messaging portal). In the first step, we will send you a non-binding offer, which will include our general terms and conditions with legal disclosure and information on your right of withdrawal before the purchase/contract conclusion takes place.

Koşul: yeni, Üretim yılı: 2026, Machine type: YE 200 Manufacturer: ERBA Power kW: 2 x 0.3 Total volume: 200 l Description: Rodpfx Aoyq N Epsk Nst The ERBA Separation Track YE 200 is used for separating workpieces from abrasive media. Two motors provide the necessary movement of the screen. The YE 200 can be used as a standalone machine or in combination with other systems, such as the ERBA Turbo (centrifugal finishing unit). The separation base can be quickly and easily changed depending on requirements. An optional frequency converter can be installed, enabling stepless adjustment of the motor speed. As an experienced partner, we offer you expertise in the field of vibratory finishing. Together with you, we develop efficient solutions to achieve optimal process results. The stated price is net, plus the currently applicable statutory VAT and shipping costs. Images may show the system including optional accessories, which are available at extra cost. The stated price refers to the base machine only. Sample images are shown. The actual appearance and dimensions may differ from the photos. If you are interested, we look forward to your inquiry. We are happy to advise you without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). This offer is solely an online presentation of our goods. The contractual negotiation is conducted via telecommunication (e-mail, telephone, message portal). In the first step, we will send you a non-binding offer, with which we will also inform you about our general terms and conditions, legal notice, and right of withdrawal, before any purchase or contract conclusion takes place.

Koşul: yeni gibi (kullanılmış), Üretim yılı: 2023, x-travel: 4,216.0 mm y-travel: 2,007.0 mm z-travel: 305.0 mm Control: CNC Table size: 4,902.0 x 2,134.0 mm Max. workpiece weight: 1,465 kg/m² Machine weight approx.: 2,500 kg Total power requirement: 30 kW Space requirement approx.: 5,486.0 x 3,708.0 mm The compact bridge-design waterjet cutting system features a torsion-resistant steel frame with a long-lasting, specialized anti-corrosion coating. Both X-axes and the particularly elevated Y-axis are based on the maintenance-free Intelli-TRAX drive, developed by OMAX specifically for the unique requirements of waterjet cutting machines. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive delivery system - High-pressure system with special stainless steel high-pressure tubing Rodpfx Akoyclvne Net - MAXIEM direct pump M4050 - OMAX PC-based control software Intelli-MAX for MAXIEM - OMAX PC-based control software Intelli-MAX Premium - Cutting head technology based on the 5-axis A-Jet taper compensation head - Height sensor for the 5-axis A-Jet cutting head - Laser pointer for positioning assistance - Automatic sludge removal system MBM ASAS-ME - Compressed air injection for the automatic sludge removal system MBM ASAS-ME - Clamping and fixture set for sheet materials and material holders - Collection grates in the cutting tank - Sensors for automated process monitoring - Water treatment via water conditioning including water analysis - Omni-Start piercing assist (vacuum assist) for brittle and laminated materials

Koşul: ikinci el, Komplette Abfüllanlage für Wasser (PET 1,5L) – Übersicht Diese gebrauchte PET-Abfülllinie ist für stille Wasserabfüllung in 1,5-Liter-Flaschen konfiguriert und bietet eine Leistungsbandbreite von ca. 12.000 bis 16.000 Flaschen pro Stunde. Sie ist für den industriellen Verpackungs- und Getränkebereich konzipiert und kombiniert praxiserprobte Gebrauchtmaschinen führender Hersteller, um eine zuverlässige und effiziente Lösung für gebrauchte Abfüllanlagen zu bieten. Die Ausstattung umfasst Preformhandling, Streckblasmaschine, Füller, Verschlusshandling, Etikettierer, Schrumpfpacker, Tragegriffapplikator, Palettierer und Fördertechnik und ermöglicht so einen durchgängigen, vollautomatischen Verpackungsprozess. Wesentliche Komponenten sind ein Preform-Kipper und -Elevator von Sameto Technifil, eine Sidel SBO10 Streckblasmaschine, ein Alsim Asmojet Füller, ein Arol Verschlusszuführer, eine Kronos Contiroll Etikettiermaschine, ein ACMI Fenix 165 Schrumpfpacker sowie ein Smipack HA50 Tragegriffapplikator. Diese vielseitige Verpackungsanlage eignet sich ideal für Getränkeproduzenten, die ihre Kapazitäten erweitern oder eine bestehende Gebraucht-Linie durch zuverlässige Komponenten mit konstantem Output ersetzen möchten. Technische Daten & Leistungsprofil - Produktionsleistung: 12.000–16.000 Flaschen/Stunde - Hauptprodukt: Wasser - Gebindetyp: PET - Flaschenformat: 1,5L - Preform-Kipper & Elevator: Sameto Technifil EBH 2050 (2010) - Streckblasmaschine: Siedel SBO10 (2010) - Füller: Alsim Asmojet (1999) - Verschlusszuführung: Arol Rsdpfexywglsx Ak Not - Etikettierer: Kronos Contiroll (2004) - Schrumpfpacker: ACMI Fenix 165 (2019) - Tragegriffapplikator: Smipack HA50 (2002) - Zusatzeinheiten: Mixer, Palettierer, Fördertechnik Modernes Automatisierungs- & Steuerungssystem Die Linienarchitektur unterstützt die synchrone Steuerung von Streckblasen, Befüllen, Etikettieren und Endverpackung über gängige industrielle Schnittstellen. Einzelne Maschinen verfügen in der Regel über HMIs für formatbezogene Anpassungen, Rezepturwahl und Echtzeit-Statusüberwachung. Sicherheitsverriegelungen, Schutzeinrichtungen und Not-Aus-Schnittstellen ermöglichen ein integriertes Stop/Start-Management über Förderer und Verarbeitungseinheiten und gewährleisten einen gleichmäßigen Anlagenfluss sowie minimale Ausfallzeiten im Betrieb. Produktionslinien-Integration Diese Komplettanlage ist auf Inline-Betrieb mit kontinuierlichem Flaschenfluss vom Preformhandling bis zur Palettierung ausgelegt. Die enthaltene Fördertechnik ermöglicht reibungslose Übergänge zwischen den einzelnen Maschinen und trägt zu einem stabilen Durchsatz im angegebenen Leistungsbereich bei. Die Konfiguration ist auf die Abfüllung von 1,5L PET-Wasserflaschen ausgelegt und deckt gängige Anforderungen für industrielle Getränkeverpackung ab. Die Integration von vorgelagerter Preformzuführung und nachgelagerter Logistik ist über standardisierte mechanische und steuerungstechnische Schnittstellen gewährleistet. Maschinenzustand & Wartungshistorie Die angebotene Gebraucht-Abfülllinie umfasst Baujahre von 1999 bis 2019. Die Linie wird in funktionsfähigem Zustand zum Verkauf angeboten und eignet sich für die Wiederinbetriebnahme in der Getränkeproduktion.

Koşul: mükemmel (kullanılmış), Üretim yılı: 2024, çalışma saatleri: 3.500 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 111549, hava ihtiyacı: 6 m³/saat, çalışma basıncı: 6 bar, toplam genişlik: 1.300 mm, giriş akımı türü: trifaze, iç uzunluk: 8.000 mm, - Year of construction: 2024 - Machine operating hours: 2000 h - Mesh conveyor made of manganese, 1000 mm width - Adjustable belt conveyor speed - 4 turbines, 11 kW each, type Rutten Gamma 330 HD - Stepless speed control of the turbines - Hot Spot chamber made of manganese and tool steel - Automatic part detection - Automatic abrasive flow regulation - Automatic abrasive refilling - Automatic part blow-off - Rosler BF 40/40 dedusting system - The machine enables operation with media of the highest GH hardness and sharp edges. Redpfxowvgbgo Ak Not - Turbine blades made of tungsten carbide guarantee 30,000 h of operation - Turbine covers made of tungsten carbide provide even greater protection against machine body wear

Üretim yılı: 2021, çalışma saatleri: 1.513 h, Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 11.500 kg, toplam uzunluk: 6.050 mm, toplam genişlik: 2.450 mm, toplam yükseklik: 2.700 mm, makine/araç numarası: B205, Our robust FEED HOPPER is specifically designed for the precise dosing of challenging, hard-to-meter input materials. Equipped with a plate belt, the hopper easily handles abrasive or coarse-grained materials. With a capacity of 7 m³ and an optionally integrable leveling roller, the feed rate can be adjusted as needed. Redjxta D Topfx Ak Njt This module is part of our rental fleet.

Üretim yılı: 2018, Koşul: işlem için hazır (kullanılmış), Gross volume: 90 l, max. usable volume: 60 l, max. fill weight: 175 kg, disc drive type: frequency-controlled electric geared motor, disc drive rated power: 4 kW, disc nominal speed: 213 rpm, tilting drive type: hydraulic cylinder, tipping angle: 49°, max. discharge height when tilting: 2200 mm, loader tilting drive type: hydraulic cylinder, tipping angle: 41°, max. discharge height when tilting: 2700 mm, buffer drive type: electric unbalance motor, drive power: 0.3 kW, tilting drive type: hydraulic cylinder, tilting range: -25° to 12°, screening machine drive type: 2x electric unbalance motor, drive power: 2x 0.25 kW, abrasive media return chute drive type: electric unbalance motor, drive power: 0.19 kW, hydraulic unit flow rate: 8.0 l/min, operating pressure: 170 bar, pump motor drive power: 3 kW, tank volume: 30 l, valve voltage: G24, length: 2812 mm, width: 2094 mm, operating hours: 14,021 h, motor operating hours: 427 h. Application areas: edge rounding, coarse and fine grinding, descaling, degreasing, glazing, polishing, deburring, cleaning. With documentation, inspection on site possible. Rodpsw S Tymjfx Ak Nst

Üretim yılı: 2017, Koşul: işlem için hazır (kullanılmış), Kesici kafalar: 2, kesici kafa tipi: AWJ 2D, abrasiv besleme: SM4000 sistemi, pompa tipi: KMT Streamline SL-VI Standard, maks. pompa basıncı: 3800 bar. Tabla boyutları X/Y: 3200mm/1710mm, kesim boyutları X/Y: 3010mm/1510mm, hareket mesafeleri X/Y/Z: 3010mm/1510mm/250mm, hareket hızı: 12m/dk, kesici kafa mesafe aralığı: 90mm-450mm, pozisyonlama hassasiyeti: +/-0,075mm, tekrar hassasiyeti: +/-0,035mm, kontrol: Fanuc 0i-MF, çalışma saati: 4866sa. Yağ soğutucu, su arıtma sistemi ve güvenlik alanı dâhil. Dokümantasyon mevcut. Yerinde inceleme mümkündür. Rodpfsxp Rcfjx Ak Njt

Koşul: mükemmel (kullanılmış), Üretim yılı: 2024, Fonksiyonellik: tamamen fonksiyonel, çalışma genişliği: 600 mm, giriş voltajı: 400 V, toplam ağırlık: 3.560 kg, iş parçası yüksekliği (maks.): 170 mm, The high-performance deburring machine for deburring, edge rounding, and finishing steel parts up to 600 mm in width. This deburring and finishing machine from Q-Fin has been specifically developed for applying a large radius of up to 2 mm to steel sheet. With the Q-Fin SER600 Super Edge Rounder, you can deburr, grind, break edges, round, deslag, remove oxide layer, or create a line finish on sheet metal parts up to 600 mm wide. A combination of these operations is also possible. The throughput rate of the SER600 is 3 to 5 times higher than comparable machines. This new 2025 model is equipped with a magnetic support, making it ideal for processing steel cut parts and other magnetic materials. The machine is fitted with 5 processing stations. Operation is simple via an HMI touchscreen on the front of the machine. The first station of the SER600 features a grinding unit. Rodpjl Dw D Eefx Ak Not The belt of this unit removes burrs and/or heat discoloration from the product surface. If there are no burrs, the grinding belt can be omitted or removed. It is also possible to process your part with a finer abrasive belt or finish with a Scotch-Brite belt. The second and third stations comprise the disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations are equipped with 2 round brushes rotating in opposite directions. These brushes are used to remove sharp edges by edge breaking or, thanks to the unique combination of two brush systems, by forming a radius of up to R=3 mm. With the use of special brushes, the SER600 with magnetic system is also very suitable for removing oxide layers from steel products or slag from plasma-cut components. We offer the combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set'. The WES6000, developed by Q-Fin, is designed to safely extract grinding dust without pressure loss. This extraction system is made entirely of stainless steel, works with wet operation, and extracts grinding dust from stainless steel, steel, and aluminum, thus eliminating fire and explosion hazards. According to Q-Fin, it is the safest, simplest, and most sustainable way to extract grinding dust. With the WES6000, there is no more grinding dust in the air and/or the work environment. Currently, we have 2 SER600 units in stock: 1x New (year of construction 2025) 1x Few months used, as new (year of construction 2024) The machines can be viewed by appointment in Bergeijk. Both machines come with a 1-year warranty on the frame and all non-wearing parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - Electrical connection requirement SER600: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Koşul: iyi (kullanılmış), Code: 0260 Brand: DMC SCM GROUP Model: UNISAND 2000 - CE Standard Automatic wide belt sander with 2 longitudinal units and 1 transverse unit at the infeed, suitable for furniture manufacturing, joinery, custom-made fittings, panels, wooden doors, window frames, semi-finished products, and various applications – compliant with CE standards. Technical Data: - Maximum working width: 1350 mm - Minimum working width: 52 mm - Minimum workpiece length: 400 mm - Minimum/maximum working height: 4/170 mm - Feed belt with variable speed drive - Longitudinal abrasive belt dimensions: 1370 x 2620 mm - Transverse abrasive belt dimensions: 150 x 6550 mm - Lamellar belt dimensions: 140 x 6300 mm - Automatic belt tracking - Automatic table height adjustment - Digital display for working thickness - Control panel with dust-resistant membrane keyboard - Electronic abrasive belt oscillation system - Rubber-coated pressure rollers - Automatic belt tracking 1st Unit: Transverse sanding pad with 6550 mm development, equipped with a lamellar belt to ensure stability and optimal abrasive belt tensioning. Sectioned electronic pad "EPICS" with "HYDRA" electronic control, 46 individually controlled sectors, 30 mm pitch. LED display for monitoring active pad sectors. The unit comes with blowers for cleaning the abrasive belt. 2-speed motor: 12/15 kW. Suction hood diameter: 160 mm. Rsdpfx Aox Dm Tvok Not Combined longitudinal calibrating/sanding unit with steel roller and sectioned electronic pad "EPICS" (46 sectors, 30 mm pitch), and reading barrier (46 sectors). Abrasive belt size: 1370 x 2620 mm. Roller diameter: 220 mm. Motor power: 15/18.5 kW. Oscillating blowers with electronic control. Sectioned electronic sanding pad "EPICS" (46 sectors, 30 mm pitch), reading barrier (46 sectors). Motor power: 15 kW. Oscillating blowers. Scotch-Brite satin finishing roller - Diameter: 150 mm - Motor power: 3 kW - Suction hood diameter: 160 mm Vacuum table Electronic control: HYDRA 35 Compressed air: 8 bar Dimensions (assembled): 3200 x 2900 x 2400 mm (H) Dimensions (for transport): 3200 x 2300 x 2400 mm (H) Weight: 4400 kg

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, SANDING MACHINE Line composition: - 2 powered loading rollers Dimensions: 2100 x 3300 mm - Roller conveyor on lifting table Dimensions: 2100 x 3300 mm - Hydraulic lifting table Capacity: 6000 kg Dimensions: 2100 x 3300 mm - Panel vacuum lifter - Loading roller conveyor with driven rollers - Imeas 2100 Panel Sander - 2 offset sanding rollers - Sanding roller power: 90 kW + 90 kW Rodjwzlnpopfx Ak Net - Driven roller power: 9 kW - Thickness adjustment unit power: 3 kW - Minimum sanding thickness: 3 mm - Maximum sanding thickness: 60 mm - Abrasive belt tensioning and centering unit - Outfeed roller conveyor Width: 2100 mm – Length: 4000 mm For sanding quality control - Extraction roller unit - Lifting table for bundle formation Capacity: 6000 kg Dimensions: 2100 x 3300 mm - Outfeed bundle chain conveyor Dimensions: 3000 x 6000 mm

Koşul: iyi (kullanılmış), Abrasive Blasting System MHG SMG 45 K (Vacuum Cabinet) - Working area: 1100x660x700mm - Integrated extraction - Two side doors / dust-tight closure Rsdpfxjyib Dfs Ak Net - Double-walled, noise-insulated foamed construction - Blasting gun with nozzle - Operating pressure: 3-7 bar - On/Off – Lighting – Extraction - Pressure regulator – Manometer – and foot switch - Viewing window Dimensions (LxWxH): 1.5x1.6x1.8 meters / 380 kg Errors and input mistakes excepted.

Koşul: yenilenmiş (kullanılmış), Üretim yılı: 2019, çalışma saatleri: 5.900 h, Fonksiyonellik: tamamen fonksiyonel, Waterjet Cutting System 2010 Premium TAC From previous ownership, serviced and fully maintained after complete overhaul in 02/2026, tested and ready for operation. Certificate: Maximator JET Availability: in 4 weeks Cutting table year of manufacture: 2019 Cutting table operating hours: 5,900 h • Effective cutting area: 2,000 mm (bridge) x 1,000 mm • Z-axis CNC clearance height: 200 mm with Quick UP • Cutting head: TAC12, A/B +/- 12° • Automatic height sensing and collision protection • CNC control: NUM • Rittal switch cabinet on castors Rsdoxvqvfopfx Ak Not • Operator PC with LED monitor, splash-proof keyboard and mouse • Waterjet software: SmartCut powered by IGEMS, subscription • Handheld control unit • Laser for position detection • Cutting valve: MJ 100 • Abrasive head: aJET 3D • CNC abrasive dosing unit with intermediate container • Abrasive storage container: 1,200 kg with automatic pressure conveying system • High-pressure piping on the axes up to the cutting head • Safety system with light curtains • Water basin with heavy-duty lamellar support grid • Alignment edge in X and Y • Machine feet: precision wedge shoes • Warranty: 1 year or 1,200 operating hours • High-pressure pump: HYTRON 40.30, 30 kW, year: 2006, 28,852 h, retrofit 10/2025 with warranty, new pulsation damper with TÜV Technical data and prices are subject to change and error. Subject to prior sale.

Koşul: ikinci el, Number of sanding units: 2 pcs. Sanding width: 190 mm Maximum sanding height: 4-180 mm HESS - GLORIA 2-BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's Description: Rjdpfxjv D Rg Dj Ak Not ----- Compact design engineered to modern standards. Quiet and vibration-free operation due to the rigid, robust machine frame and specialized insulation. Safety devices comply with EU Machinery Directive and are certified as “dust-tested”. Offset sanding units equipped with large dimensioned tension rollers for efficient heat dissipation and stable belt tracking. Sanding units feature forced sanding belt oscillation. Two-point sanding dust extraction directly at the sanding drum. Additional airborne dust extraction at the large tension rollers. Integrated sanding belt blow-off system extends belt service life. Integrated brushing and finishing unit adjustable via threaded spindle with high-performance dust extraction. Motorized sanding thickness adjustment for the entire upper section via precision threaded spindles and linear ball sets on hardened and ground precision shafts, equipped with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and sanding pad optimally proportioned for abrasive load. Hardened and ground sanding drums. Maintenance- and wear-free oxide ceramic sanding pads (DBGM) provide outstanding gliding properties, effective heat dissipation, and high dimensional stability. Sanding belt tensioned by pneumatic cylinders. Belt change via pneumatically controlled belt release. Sanding belt tracking can be set during belt changes. Electropneumatic pressure monitoring for air supply with optical fault indication. Automatic machine stop triggered by belt breakage and infeed safety with integrated wood thickness control. Visual signals at the operator panel. Feed device and proven, calibrated, slip-resistant and high-adhesion conveyor belts mounted on precisely ground tables and spring-mounted pressure rollers. Cardan shaft drive ensures uniform wood feed. Feed speed infinitely adjustable. Chip removal setting below via precision threaded spindle with scale ring display (resolution 0.1 mm). Ergonomically arranged controls and adjustments on machine front: sanding and brushing units above and below, workpiece feed unit, sanding thickness adjustment, machine operation and fault indication. Integrated power and control unit with lockable main switch in machine frame. All motors electrically protected against overload. Technical Data: ----- Sanding belt speed: 24 m/sec Sanding width: 190 mm Sanding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Feed speed: Stepless, adjustable from 5 - 25 m/min Sanding belt dimensions: 200 mm wide, 1600 mm long Electrical connection: 400 V, 3/N PE, 50 Hz Sanding units: 2 x 4 kW Feed drive: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m³/h, 20 - 25 m/sec Extraction connection: 2 x 160 mm diameter, at the top of the machine frame External dimensions: Length: 1600 mm ...

Koşul: yeni, Üretim yılı: 2025, Fonksiyonellik: tamamen fonksiyonel, giriş voltajı: 400 V, We have been manufacturing pneumatic conveyors for over 20 years, suitable for handling bulk materials such as seeds, grain, peas, corn, as well as conveying wood pellets, sawdust, plastic granulates, sand, and abrasive powders—even corundum and dispersed steel fibers for feeding concrete mixers or use in concrete batching plants. These systems can also be used for aerating various materials, including hay, cereals, herbs, and more. It is also excellent for supplying fresh air into production halls, poultry houses, and cowsheds, as well as for extracting smoke, dust, and harmful welding gases. Rjdpfow Aqamsx Ak Not The system allows for the use of flexible hoses. Our high-performance blower features a 5.5 kW/400V motor. The robust, sectional construction is made from high-grade steel. Pipes and bends are crafted from 3.6 mm thick steel, allowing you to transport even the most challenging materials with excellent durability. We can also supply lightweight and heavy-duty flexible hoses for transporting the above-mentioned materials. Efficient at transporting materials even over longer distances (range depends on the material type). The powerful blower output enables both horizontal and vertical conveying. We have extensive manufacturing experience in this field. On request, we can manufacture some or all elements in STAINLESS or GALVANIZED versions (including pipes). Our production process follows the Kaizen method. Kaizen, meaning "change for the better" in Japanese ("kai" = change, "zen" = better), is a management philosophy and practice focused on continuous improvement of processes and company operations. PLEASE SEND INQUIRIES BY EMAIL FOR BEST RESPONSE. In the standard version, we sell just the blower with a flanged outlet for connecting various pipes. We manufacture steel pipes and bends from 3.6 mm thick steel. Impeller speed: 2800 rpm (OPTION: wide-range electronic speed control available from stock). Using three-phase motor speed controllers offers many benefits, including energy savings, precise torque adjustment, and increased overall system efficiency. Additionally, they reduce energy losses, further improving production efficiency. Our blowers are highly efficient. The machine is built from interchangeable modules (assembled with M8 screws), which we always have in stock. This allows for versatile customization and application. Individual modules are also available separately (e.g., the blower only). We can tailor the design to the customer’s requirements. The blower is easy to transport (can be moved by one person), and can be carried even with a small car, van, or trailer. Setup is simple, and operation is user-friendly. We also manufacture additional wheels for easier mobility (two types available). Net price for the basic set without electronic speed control: 10,300 PLN / EUR 2,453 Net price with electronic speed control: 13,400 PLN / EUR 3,190 Price for the blower only, without the feed hopper: 10,300 PLN / EUR 2,452 Price for a galvanized distributor (two pipe inlets) for air intake or exhaust (flanges with pipe mounting holes): 1,900 PLN / EUR 452 Price for a galvanized distributor (three pipe inlets) for air intake or exhaust (flanges with pipe mounting holes): 2,400 PLN / EUR 571 Optional wide-range electronic speed controller for the motor and blower: 2,900 PLN / EUR 690 For more information, please contact us by email. We operate 24/7.

Koşul: yeni, Üretim yılı: 2025, Fonksiyonellik: tamamen fonksiyonel, tekrar doğruluğu: 0,025 mm, X ekseni hareket mesafesi: 4.000 mm, Y ekseni hareket mesafesi: 2.000 mm, Z ekseni hareket mesafesi: 310 mm, konumlandırma hassasiyeti: 0,025 mm, giriş akımı türü: trifaze, giriş voltajı: 380 V, alüminyum sac kalınlığı (maks.): 300 mm, işletme hızı: 15.000 mm/s, basınç: 4.150 bar, garanti süresi: 24 aylar, kesme hızı: 15.000 mm/dak, azami seyir hızı: 20.000 mm/dak, masa yükü: 1.200 kg, son revizyon yılı: 2025, ürün yüksekliği (maks.): 300 mm, Brand new Waterjet Cutting Machine 💧 Waterjet Cutting Machine X-JET 2040 – PROFESSIONAL – Made in Poland 🇵🇱 🔧 Polish manufacturing – top quality and precision! The modern, fully professional X-JET waterjet cutter has been designed for the most demanding customers. Thanks to state-of-the-art technology and a rigid frame construction, it guarantees excellent cutting quality, high precision, and durability for years of intensive use. 🔹 Key Features: Working area (3-axis): 2000 x 4000 mm Feed rate X/Y: up to 20,000 mm/min Positioning accuracy: ±0.025 mm Repeatability: ±0.025 mm Rsdpfx Aev Tmxuok Njt Max. table load: 1200 kg/m² Enclosed moving units + servo drives Electronic central lubrication Advanced CNC software + IGEMS CAD/CAM 2D/3D Options for equipping with: 💥 5X Cutting Head: Bevel compensation and chamfering up to 45° Drive: Harmonic Drive + Spinea TS Pneumatic on/off valve with diamond cutting head Automatic cutting height adjustment Z-axis and tool calibration 🧠 Intelligent systems: 12 MP camera Automatic tool angle positioning system High-precision 5-axis cutting calibration system 💦 High-pressure pump: Maximum operating pressure: 4150 bar (60,000 psi) Continuous working pressure: 3792 bar (55,000 psi) Flow rate: up to 3.8 l/min Nozzle diameter: 0.10–0.35 mm High-quality intensifier and proportional valve Quiet operation and touchscreen control panel ⚙️ Additional equipment: Automated abrasive removal system – WAWE 170 Professional abrasive feeder – DUNA 1100 Reverse osmosis water treatment system Economical sludge extractor – 170 l/min 📍 Made in Poland – a local product with global capabilities. 💬 Feel free to contact us! We are happy to send you the full technical documentation and prepare an individual quote. Custom machine size and configuration available upon request. *(Reference images, the offer refers to a device with a 1.5 x 3 m working area, 3-axis)*

Koşul: yeni gibi (sergi parçası), Üretim yılı: 2025, çalışma genişliği: 1.525 mm, sac kalınlığı (maks.): 100 mm, toplam ağırlık: 6.400 kg, The 42 series offers the solution for manufacturers who deliver premium quality products. This top-tier quality is achieved through a multi-rotating brush unit with 8 abrasive lamella brushes, which provide consistent deburring and perfectly round the edges of the metal. Multidirectional rotary brush machine (RB) for uniform deburring and finishing of flat sheet metal parts. Complete processing on all sides in a single pass, with a directionless surface finish applied to the part’s surface. Equipped with one (or more) abrasive belt unit(s) (W) for pre-deburring and fine grinding. Cup brush unit (TB) for deburring, edge breaking, directionless finishing, or removal of scale. Rjdpfxsxw Ih Us Ak Net - Abrasive belt unit (self-calibrating) - Cup brush unit (self-calibrating) - Rotary brush unit with 8 brushes (self-calibrating)

Koşul: yeni gibi (sergi parçası), Üretim yılı: 2025, çalışma genişliği: 1.100 mm, sac kalınlığı (maks.): 100 mm, The 32 RB series offers the solution for manufacturers who supply premium quality products. This top quality is achieved by a multi-rotating brush unit with four abrasive flap brushes that provide uniform deburring and perfectly round the edges of the metal. Multi-directional rotary brush deburring machine (RB), for consistent deburring and finishing of flat sheet metal parts. Complete all-around processing in a single pass, creating a non-directional surface finish on the workpiece. Equipped with one or more abrasive belt units (W) for pre-deburring and finishing. Redpfx Akoxw Ikce Net - Abrasive belt unit - Rotary brush unit (self-calibrating) - Abrasive belt unit