Kullanılmış Faymonville Multimax Satteltieflader - Hydr. Gelenkt satın al (4.505)

Koşul: yeni, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Additional vehicles available – extract from equipment list. Full equipment details upon request. GOOSENECK: * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front wall, detachable, approx. 400 mm high Kdsdpfx Asxarmaohzsl * ASPÖCK-UNIBOX on the front control panel with 24N, 24S & 15-pin sockets * 3 kW electric-hydraulic power pack for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolted lashing rings: first hole approx. 200 mm from the front, then every approx. 400 mm; 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear of the gooseneck (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring over the gooseneck, over king pin checker plate covering * 3.5 inch king pin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO plug socket on the front control panel (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retaining spring suspended on the outer beams of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, approx. 8,800 mm long with rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the platform length * BPW axles and suspension, 1st axle with steering, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tyres – brand at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg * On the platform, continuous and between axles interrupted approx. 50 mm thick hardwood flooring (thereby increasing the coefficient of friction). – Slotted holes for hook-in and repositionable bridging elements * At front of platform – 1 adjustable intermediate table, approx. 300 mm wide, for the extension tube with large cross-section, with checker plate covering. – Front and rear with slotted holes for hook-in and repositionable bridging elements * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 7 pairs of recessed, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * Extensions (galvanized) extendable by approx. 230 mm on each side (without wooden planks) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation in tractor unit * TPMS tire pressure monitoring sensors installed in all wheels * Platform locking with conically welded locking profiles every 500 mm * Locking control left and right on the trailer * For the intermediate table, approx. 300 mm wide, a mechanical lock to secure the table to the extension * 5 pairs of threaded blocks on the extendable beam for mounting bolt-on rings M20 (LC 5,000 daN) BRAKE SYSTEM

Koşul: yeni, azami yük ağırlığı: 67.200 kg, toplam ağırlık: 85.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website. Extract from the specification. Full equipment details available on request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10° * For tractor units: 6 x 2, 6 x 4, and 8 x 4 short * Detachable steel front bulkhead, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flush-mount lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish * 1 plug-in ALU tailboard, approx. 400 mm high, anodized finish * Approx. 40 mm strong hardwood flooring above the gooseneck, checker plate flooring above the kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, incl. overhead gallows for securing supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed in the gooseneck for plug-in stakes approx. 100 x 50 mm LOADING PLATFORM * Extendable loading platform, length approx. 11,000 mm, rear bevel approx. 500 mm x 10° * Pneumatic locking system with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the respective platform length * BPW axles and suspension, 1st axle self-steering, 2nd axle rigid, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve * Tyres: 235/75 R 17.5 3PMSF twin tires Ksdpfsrgzv Nox Ahzedl * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous hardwood flooring, approx. 50 mm thick, on the loading platform and interrupted between the axles (providing increased friction coefficient) * Slotted holes for suspended and repositionable bridging elements: - on the fixed section behind the gooseneck - at the front of the platform * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate covering, slotted holes front and rear for suspended and repositionable bridging elements * 1 pair of flush-mounted lashing rings, lying, in the fixed front section of the loading platform (LC 10,000 daN) * 9 pairs of flush fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle alignment monitoring, without installation in the tractor * 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535 * Below the gooseneck and at the rear cross member, left and right, a 7-pin socket each with bracket for warning signs * Painted-on sand coating on the outer frame of the platform, the checker plates, and the transition area between the loading platform and...

Koşul: yeni, azami yük ağırlığı: 50.400 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our complete range of vehicles with immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK * Gooseneck in SNT design to optimize the loading platform length, approx. 3,700 mm long, rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK UNIBOX at the front connection rail with sockets * 3 kW electric-hydraulic power unit for controlling hydraulic functions (except hydraulic winches) * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized * One removable aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm solid hardwood floor above the gooseneck, over the kingpin with checker plate covering * 2" kingpin * Socket at the rear of the gooseneck for aluminum loading ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOADING AREA * Extendable loading area design, approx. 8,800 mm long, with rear taper approx. 500 mm x 10° * A recess in the loading platform and into the taper for accepting the excavator bucket arm, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st axle steering, all other axles hydro-mechanically forced-steered * 1st axle with electric-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF, twin mounting * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B – static test load: approx. 50,000 kg * Continuous hardwood flooring approx. 50 mm thick on the loading area and interrupted between axles (increases friction coefficient) * 1 intermediate platform, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanised widenings, approx. 230 mm per side (without wooden planks) * Wheel recesses with 15 x 15 mm square climbing bars in front of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts * Aluminum elements lockable on the extension tubes of the widenings Ksdpfx Aetx Nwnehzsdl * Widenable U-profiles for inserting the aluminum covers: - on the fixed section behind the gooseneck - on the intermediate platform - on the extendable loading area * Wheel recesses with 15 x 15 mm square climbing bars between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts * Aluminum elements lockable on the extension tubes of the widenings * 1 pair of mechanical rear supports * Remote steering from both the front and rear via cable remote control, with axle single-track control, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm long, approx. 900 mm wide * Hydraulically foldable ramp tips * Ramps can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber flooring approx. 25 mm and steel deck approx. 5 mm as additional

Koşul: yeni, azami yük ağırlığı: 51.780 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. The following is an excerpt from the equipment list. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimized loading area length, approx. 3,700 mm long, with rear ramped section approx. 1,000 mm x 10° * Suitable for tractor units: 4x2, 6x2, and 6x4 * Plug-in steel front wall, approx. 400 mm high * ASPÖCK UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power pack for controlling hydraulic functions (excluding hydraulic winches) * Outer gooseneck beams with mounting holes for bolted lashing rings * One mounting hole at the rear upper part of the outer beam for a bolted lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in side aluminum drop sides, approx. 400 mm high, anodised finish * On the gooseneck: 1 plug-in aluminum rear board, approx. 400 mm high, anodised finish * Approx. 40 mm thick hardwood flooring above the gooseneck * 2" kingpin * 1 transverse stake pocket rail fitted in the gooseneck deck in front of the ramped section, for plug-in stakes approx. 100 x 50 mm LOADING AREA: * Extendable loading area, approx. 8,800 mm long, with rear ramped section approx. 500 mm x 10° * Recessed well in the deck including the sloped section for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axles fixed, 3rd and 4th axles steering * 3rd and 4th axles with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Mechanical landing legs with 2-speed gearbox and crank * Continuous hardwood flooring approx. 50 mm thick on deck and between axles (increases friction coefficient) * 1 intermediate table with recessed platform, approx. 300 mm wide, for large cross-section sliding tube with sheet metal covering * 1 pair of lashing rings on front cross-member (LC 10,000 daN) * 6 pairs of recessed lashing rings in the outer frame, foldable outward (LC 10,000 daN) * Additionally, 1 pair of external lashing rings on the front cross-member, oriented approx. 90° toward deck (LC 10,000 daN) * Extendable galvanized side extensions, approx. 230 mm per side (without timber boards) * 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in deck in front of 1st axle * Between 2nd and 3rd axles: 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D) * 1 pair mechanical rear supports * 245/70 R 17.5 3PMSF dual tires, brand of our choice HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-HB-HV-M * One pair of two-part steel ramps, approx. 4,350 mm long, 900 mm wide * Hardwood decking * Hydraulically folding ramp tips * Each ramp hydraulically adjustable approx. 235 mm outward and 215 mm inward * Hardwood decking on rear deck slope * Ramp with hardwood surface BRAKING SYSTEM: * WABCO EBS-E braking system in accordance with EU regulations Kdsdoyhkrljpfx Ahzol SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% al...

Koşul: yeni, azami yük ağırlığı: 36.410 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire stock of vehicles, including those available for immediate or short-term delivery, on our website. Partial list of features. Full specification available on request. NECK: * SNT-design gooseneck for optimized loading platform length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front bulkhead, approx. 400 mm high Kdsdpfsy Auh Iex Ahzjl * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches) * Approx. 40 mm hardwood decking above gooseneck * 2-inch kingpin * Gooseneck guide plate for fifth wheel, approx. 500 mm wide * Rear of gooseneck equipped for ALU approach ramps * Round NATO socket on front connection strip (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders ahead of the front bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inside the chassis beam) EQUIPMENT: * Loading platform approx. 8,800 mm long, extendable version approx. 4,100 mm, rear with taper approx. 500 mm x 10° * Recess in the loading area and into the taper for excavator dipper stick accommodation, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are routed protected inside the extendable beams and automatically adjust to the platform length * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle steered trailing * 3rd axle with electro-magnetic reverse lock, can be activated by reverse gear and manually * Technical axle load: 12,000 kg per axle, air suspension with lift and lowering valve * 235/75 R 17.5 3PMSF twin tires. Brand of our choice * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load approx. 50,000 kg * Hardwood floor (approx. 50 mm thick) throughout the load area and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the large cross-section extension tube. Intermediate table with recessed platform and extendable mountings for aluminium bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses ahead of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm, with widenings at the bottom (if vehicle equipped with extendable outriggers) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load area between the 1st and 2nd axle * Wheel recesses with square climbing strips approx. 15 x 15 mm and bottom widenings * Aluminium covers for wheel recesses ahead of the axles and between the 1st and 2nd axle, which can also serve as extension planks (if vehicle equipped with extendable outriggers) * Lockable aluminium elements fitted onto the extension pipes of the outriggers * 1 pair of mechanical rear supports * 1st axle with traction aid * Painted sand...

Koşul: ikinci el, azami yük ağırlığı: 51.870 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2025, bir sonraki muayene (TÜV): 03/2026, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Ksdoxtc Uhepfx Ahzodl Excerpt from the equipment – full specification available on request. GOOSENECK Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, rear end tapered approx. 1,000 mm x 10° * For tractor units: 4x2, 6x2, and 6x4 * Detachable steel front wall, approx. 400 mm high * At the front connector strip, yellow-red air couplings * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations control * Outer beams of the gooseneck with mounting holes for bolted lashing rings * One mounting hole at the upper rear area of the gooseneck outer beams for a bolted lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in aluminum rear board, approx. 400 mm high, anodized finish * On the gooseneck, approx. 40 mm thick hardwood flooring * 2-inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Rear section of the gooseneck prepared for aluminum loading ramps * Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. 8,800 mm long, rear end tapered approx. 500 mm x 10° * Recess in the platform and in the tapered area for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension * 1st and 2nd axle rigid; 3rd and 4th axles steering trailing axles * 3rd and 4th axles with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear, 2-speed gearbox with crank handle, JOST Modul B – static test load approx. 50,000 kg * Continuous hardwood flooring approx. 50 mm thick on platform, interrupted between axles (increases coefficient of friction) * Platform locking with conically welded locking profiles at approx. every 250 mm * Long holes at the front of the platform for attachable and repositionable bridging elements * Intermediate table with stepped platform, approx. 300 mm wide, for the extension tube with large cross-section, sheet metal cover – front and rear long holes for attachable and repositionable bridging elements – detachable cover level with platform * 1 pair of lashing rings on the front cross beam (LC 10,000 daN) * 6 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN) * Additionally, 1 pair of lashing rings outside on the front cross member of the platform, rotated approx. 90° inwards towards the platform (LC 10,000 daN) * Extensions (galvanized) extendable by approx. 230 mm per side * 1 pair of fixed, open wheel recesses up to the extension, approx. 700 x 410 mm (W x D), on the platform in front of the 1st axle, wheel recesses with sheet metal cover and square climbing strips approx. 15 x 15 mm every approx. 200 mm * Between the 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D). Covers for the wheel recesses split lengthwise, with wooden inlay, outer sections with insert position (cut-off text).

Koşul: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available for immediate delivery and short-term availability, on our website. Extract from the equipment specification below. Complete equipment details available upon request. GOOSENECK: * Gooseneck in SNT design to optimize cargo deck length, approximately 3,700 mm long, with a rear bevel approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX * Grating surface on the gooseneck and rear bevel with 5 mm sheet metal reinforcement * 2-inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * On the gooseneck: 1 pair of removable aluminium drop sides, approx. 400 mm high, anodized finish * 1 LED work light mounted at the top left and right of the front wall, wired to the trailer head connection bar CARGO DECK: * Cargo deck length approx. 9,600 mm, rear bevel approx. 900 mm x 6° * Deck area behind the gooseneck hydraulically raisable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg * Full-length grating surface with approx. 5 mm steel support plate on the lift bed and cargo deck for additional reinforcement, designed for point loading Kdedpfx Aey Auhhehzsl TYRES: 235/75 R 17.5 3PMSF twin tires. Manufacturer at our discretion * TPMS tire pressure monitoring system according to ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle steering * 3rd axle with electro-magnetic reverse lock, can be activated via reverse gear and manually * 1st axle with traction aid * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve HYDRAULIC LOADING RAMPS: * 1 pair of two-piece AXS steel ramps with grating surface, approx. 4,920 mm long and 900 mm wide * Ramp tips hydraulically foldable * Ramps can be hydraulically shifted approx. 235 mm outward and approx. 365 mm inward individually * Flashing lights on the outer sides of the ramp tips, with switch next to the ramp controls * Ramp safety in transport position using quick release * Painted sand coating on the outer frame of the ramp and on the ramp tip * Mechanical drop-leg side supports in the ramps to assist when docking at unloading bays * Controls for the hydraulic ramps located on the right side of the vehicle BRAKE SYSTEM: Brake system by WABCO EBS-E, compliant with EU regulations SURFACE TREATMENT: * HRM metallization of the complete chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure optimal corrosion protection PAINTWORK: * Semi-trailer in carmine red (RAL 3002) * Rims in silver grey * Drop sides ALU natural * Wheel hubs per axle manufacturer specification * Lamp panel pure white (RAL 9010) EQUIPMENT: * Front wall made of steel, removable, approx. 1,600 mm high, incl. interface bar for service lines to tractor unit installed approx. 1,000 mm from lower edge of external frame profile * Lashing chain attachment points on the interior of the front wall, left and right, with aluminium tray below on left and right for storing chains or tension straps * Behind the front wall, approx. 12 mm thick DELIGNIT lining, bolted * 2 additional pairs of bolted lashing rings (LC 5,000 daN) * Electric cable winch, approx. 5,400 kg pulling force, with radio remote control. Wire cable approx. 24 m long, cable diameter approx. 9.5 mm, including cable pressure roller * Deflection pulley for the cable winch with shackle and bolted lashing point

Koşul: yeni, azami yük ağırlığı: 38.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete inventory of vehicles, including immediately and short-term available vehicles, on our website. Partial list of equipment. Full specifications available on request. EQUIPMENT: * Gooseneck, approx. 4,100 mm length, with central beam * Extendable loading platform, approx. 9,400 mm length, with rear bevel approx. 350 mm x 10° and integrated mounting rail for attaching loose aluminum loading ramps * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length * Technical fifth-wheel load: 18,000 kg * Suitable for tractor units: 4 x 2 and 6 x 2 * TPMS tire pressure monitoring system compliant with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced-steered, mounted on turntables * Technical axle load: 12,000 kg per axle * Air suspension with lift/lower valve * 235/75 R 17.5 3PMSF twin tires, brand of our choice * ASPÖCK-UNIBOX * 3 kW electro-hydraulic unit for hydraulic system operation. Supply connections on the tractor unit not installed * 4 pairs of recessed lashing rings in the gooseneck outer frame: - the three front pairs installed horizontally (LC 10,000 daN) - the rear pair foldable outward (LC 10,000 daN) * 4 pairs of stake pockets recessed into the gooseneck outer frame for plug-in stakes approx. 100 x 50 mm * 2-inch kingpin * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * On gooseneck and loading platform approx. 32 mm wooden floor encased in ALU omega profiles * 10 pairs of horizontally recessed, foldable lashing rings in the loading platform outer frame * 1 pair of lashing rings (LC 10,000 daN) in front of the last axle and at the rear cross member * All other lashing rings (LC 5,000 daN) * 6 pairs of stake pockets recessed into the loading platform outer frame for plug-in stakes approx. 100 x 50 mm * 1 spare wheel holder under the platform on the right side in direction of travel * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the platform on the left side in direction of travel * Bevel at the vehicle’s rear cross member, approx. 350 mm x 10° * Integrated mounting rail for loose ALU loading ramps at the vehicle’s rear cross member * 1 pair of drop tube supports at the rear cross member * Remote steering from front and rear via cable remote control, with single-track control of axles (no installation in the tractor unit) * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * 1 LED work lamp each left and right on the front wall, wired to the connection panel for the tractor unit Kdjdjy Augdspfx Ahzel * One locking point on the extension, every approx. 500 mm * Holder for plug-in stakes on inside of gooseneck front wall when not in use * 4 wheel chocks with holder under the loading platform * Extendable galvanized platform wideners approx. 230 mm per side (without timber floorboards) * 1 LED work lamp each left and right in front of axles, wired to the tractor unit connection panel * 2 axle load gauges mounted on the left side including axle load chart * 1st axle with starting aid * Under the gooseneck and at the rear end cross member left and right, each with mounting bracket for warning plates * Acoustic warning signal when reversing * EU reflector at the rear of the vehicle

Koşul: yeni, azami yük ağırlığı: 42.900 kg, toplam ağırlık: 55.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 29.000 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Excerpt from the specification. Full equipment details available upon request. LOAD AREA: * Gooseneck, length approx. 3,900 mm with central beam * Load area with double telescopic extension, length approx. 9,300 mm * A support table approx. 200 mm wide is permanently welded to the central beam * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the relevant load area length (except for the supply of the first and second locking points) * Technical fifth wheel load: 25,000 kg for tractor units: 4 x 2, 6 x 2, and 6 x 4 * TPMS tire pressure monitoring system in compliance with ECE R 141 * BPW axles and suspension; all axles hydro-mechanically forced-steered, mounted on turntables * Technical axle load per axle: 12,000 kg; air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires. Manufacturer of our choice * ASPÖCK-UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic functions * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outward * 1 pair of lashing rings (LC 10,000 daN) at the king pin – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets recessed in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket rail mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 at the rear of the gooseneck * 2-inch king pin * Mechanical landing legs with 2-speed gearbox and crank * 8 pairs of stake pockets recessed in the outer frame of the load area, for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed horizontal lashing rings in the outer frame of the load area, foldable outward * Steering override from the front and rear via cable remote control, with single-track alignment of the axles, no installation in the tractor unit * Last axle with air bellows venting activated by applying the parking brake * Bulkhead made of steel, approx. 1,600 mm high, certified in accordance with EN12642:2016 XL * Round NATO socket on the front connector strip (Maeler & Kaege VG 96 917) * 1 LED work light installed left and right at the landing legs with wiring to the tractor unit connection * Approx. 32 mm wooden floor on the gooseneck and load area * On the large cross-section telescopic tube, one locking position at approx. every 500 mm * On the small cross-section telescopic tube, one locking position at approx. every 1,000 mm, resulting in a locking option every approx. 500 mm * Cutouts in the outer frame of the load area for attaching lashing straps (LC 2,500 daN) * 4 crosswise stake pocket rails mounted in the floor of the load area, for plug-in stakes approx. 100 x 50 mm * 4 wheel chocks with holders under the load area * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the load area on the left in the direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load area on the right in the direction of travel Kodpfoyvnd Njx Ahzedl * 1 LED work light mounted left and right in front of the axles with wiring * 2 axle load gauges mounted on the left side with axle load diagram included * 1st axle with automatic lift axle function and start-up a...

Koşul: yeni, azami yük ağırlığı: 36.400 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment list available upon request. Gooseneck in SNT design to optimize loading deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic operations, excluding hydraulic winches. Without installation of supply connections on the tractor unit * Outer beams of the gooseneck with mounting holes for boltable lashing rings. The first hole approx. 200 mm from the front, then every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * One mounting hole in the upper rear area of the gooseneck's outer beams for a bolt-on lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * 3 pairs of recessed lashing rings inside on the gooseneck's outer beam (LC 5,000 daN) * 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) * 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) * On the gooseneck and rear chamfer, grating surface with 5 mm steel reinforcement * 2-inch king pin * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m in length) between trailer and tractor unit with NATO-NATO plugs * On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish LOADING AREA: * Loading area, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6° * Loading area behind gooseneck hydraulically height-adjustable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle steered. 3rd axle with electromagnetically controlled reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion, load index 143/141J (144/144F) * Mechanical landing legs with 2-speed gearbox and crank * Continuous grating surface with approx. 5 mm steel reinforcement underlay, designed for point loads: – on the lift bed – on the loading area * Painted sand coating on the deck plates of the gooseneck and in the transition areas between neck and lifting bed, between lifting bed and loading area, and between loading area and ramps * 1 spare wheel mounting bracket under loading area on right side in front of axles * Cut-outs in the outer frame of the loading area and lifting bed for securing straps (LC 2,000 daN) * 11 pairs of recessed lashing rings flush in the outer frame of the loading area, foldable outwards (LC 10,000 daN): – 3 pairs in the outer frame of the lifting bed – 8 pairs in the outer frame of the loading area * 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): – 3 pairs in the lifting bed – 8 pairs in the rear part of the loading area Ksdpfxsyhkquj Ahzjdl * Control valves for hydraulic ramps located on the right side of the vehicle * 1 pair of foldable mechanical rear supports with single-handed operation HYDRAULIC LOADING RAMPS: * 1 pair of two-part AXS steel ramps with a length of approx. 4,920 mm and a

Koşul: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Extract from the equipment. Full specification available on request. Kodpjwvzg Refx Ahzedl - Gooseneck, length approx. 4,100 mm with central beam - Loading platform, double-extendable design, length approx. 9,400 mm - BPW axles and suspension - All axles hydro-mechanically forced steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R 17.5 3PMSF twin tyres - WABCO brand brake system, EBS-E - 3 kW electro-hydraulic power unit for hydraulic operations (without installation of supply connections on the tractor unit) - 4 pairs of stake pockets set into the external frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm - 2-inch king pin - 8 pairs of stake pockets set into the external frame of the loading platform, for plug-in stakes approx. 100 x 50 mm - 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the left in direction of travel - Rear and front axle steering controllable via cable remote control with push buttons, including axle alignment control, without installation in the tractor unit - 2 axle load gauges installed on the left side - Steel front wall, approx. 1,600 mm high - 3 transverse stake pocket rails mounted in the floor of the loading platform, for plug-in stakes approx. 100 x 50 mm - 1 transverse stake pocket rail mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm - 1 additional lockable INOX toolbox under the loading platform - WADER container pockets in the loading platform for transporting: 2x 20' containers or 1x 40' container - Central lubrication system with 2 pumps, BEKAMAX brand - Complete HRM metallisation (High Resistance Metallisation)

Koşul: yeni, azami yük ağırlığı: 38.953 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Gross vehicle weight: 49,500 kg Fifth wheel load: 18,000 kg Axle load: 31,500 kg Unladen weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck length: 3,850 mm Fifth wheel height loaded: 1,200 mm Loading platform length: 9,300 mm Extendable by: 0 mm Axle spacing: 1,360 mm Steering angle radius (rear): 2,300 mm Loading height at max. load: 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical Description Gooseneck: Gooseneck with chamfered front corners at 45° and rear taper of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, 30 mm thick. Loading platform: Loading platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear slope of approx. 1,000 mm x 8°. 6 pairs of folding lashing rings facing outward (LC 5,000 daN). 2 pairs of folding lashing rings facing outward (LC 10,000 daN). 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN). Cut-outs in the outer frame of the loading platform for attaching tensioning straps. (LC 2,000 daN). Hardwood flooring approx. 48 mm thick, above the axles fitted with chequer-plate covering. Ramps: Two-piece steel ramps: One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically foldable ramp sections, hydraulic lifting device and can be hydraulically adjusted laterally. Maximum load per pair: 40,000 kg Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: 235/75 R 17.5 tyres as per manufacturer's selection. Axles: SAF axles, air-suspended, with drum brakes, featuring lift/lower function. Last axle is force-steered with electro-magnetic reverse lock, activatable via reverse gear or manually. Axle tools. Brake System: Ksdeg Sk Tropfx Ahzodl Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit. Steel Construction: Steel construction made from high-strength fine-grained steel. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: Premium and durable corrosion protection via sandblasted welded frame, primed with 2-component (2K) zinc dust primer. High-quality single-tone 2-component (2K) top coat in RAL colours of your choice. Rear metalized and painted in RAL 9010 (pure white). Metallic paint not possible. Electrical System: Electrical system compliant with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets. ISO-compliant connections. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories Included 2" king pin One galvanized steel front bulkhead approx. 400 mm high. At the galvanized front connection strip yellow/red airline couplings. 4 wheel chocks with holder on the front bulkhead (± 5kg). Cable for supplying electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long, max. 250A) between semi-trailer and tractor unit, with plug connection (ANDERSON-ANDERSON). Galvanized folding supports under the rear slope of the loading platform. Bracket for a rotary beacon at the rear of the trailer. Control valves for the ramps installed on right-hand side of trailer (± 4kg). Yellow reflective tape according to EU regulations on the sides and rear of the trailer. Electro-hydraulic unit mounted at the rear under the loading

Koşul: ikinci el, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2017, * SAF akslar * Teker havuzları * Genişliği ayarlanabilir hidrolik yükleme rampaları * Havalı süspansiyon * Genişletilebilir * Boş ağırlık: 11.020 kg -----Dahili araç numarası: 11010----Hatalar ve ara satış hakkı saklıdır. WhatsApp desteği mevcut! Kjdswta Aljpfx Ahzodl Araçla ilgili sorularınız veya daha fazla bilgi için bize rahatça WhatsApp üzerinden yazabilirsiniz. WhatsApp Almanca, İngilizce -- WhatsApp Almanca, İngilizce, Arapça

Koşul: ikinci el, Üretim yılı: 2014, Daha fazla bilgi için Theo Lelie ile iletişime geçin. Kedpfxextqkwe Ahzedl

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2011, yükleme alanı uzunluğu: 9.400 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, toplam uzunluk: 12.700 mm, toplam genişlik: 2.540 mm, süspansiyon: hava, lastik boyutu: 235/75R17.5, renk: mavi, Üretim yılı: 2011, Donanım: ABS, = Additional Options and Equipment = - Lift axle = Remarks = SAF axle with drum brakes. 1 x lift axle. 1 x steering axle – self-tracking / trailing steering. = Further Information = Axle configuration Tire size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Left inner tread: 40%; Left outer tread: 40%; Right inner tread: 40%; Right outer tread: 40% Rear axle 2: Twin tires; Left inner tread: 70%; Left outer tread: 70%; Right inner tread: 70%; Right outer tread: 70% Kodpfsy Daxzjx Ahzodl Rear axle 3: Twin tires; Steered; Left inner tread: 50%; Left outer tread: 50%; Right inner tread: 50%; Right outer tread: 50% Weights Unladen weight: 10,500 kg Payload: 44,500 kg Gross vehicle weight: 55,000 kg Identification Type number: STN-3U / HYDRAULIC RAMP / LIFT A = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). We speak Russian. We strive to provide correct information, but no rights can be derived from the published texts.

Koşul: mükemmel (kullanılmış), Catalog number 7316 TECHNICAL DATA - track width: 350 mm - working width of the shaft with saw blades: 355 mm - max. saw blade diameter: 450 mm - max. cutting height: 170 mm - saw blade bore diameter: 70 mm - table dimensions: 1850 x 790 mm from above: - detents - 2 smooth metal feed rollers - shaft with saw blades - 3 smooth metal feed rollers from below: - guide rail - detents - track - metal toothed feed roller - central electric lubrication - stepless feed speed adjustment - electric lifting/lowering of machine body, approx. 1 kW - feed motor: 2.2 kW - main motor: 75 kW - overall dimensions (L/W/H): 2600 x 1800 x 1700 mm - weight: 2700 kg – Used multi-blade saw – Condition: very good Kodpfxoyz Ty To Ahzedl Net price: 68,900 PLN Net price: 16,400 EUR (depending on rate of 4.2 EUR) (Prices may change due to greater fluctuations)

Koşul: ikinci el, azami yük ağırlığı: 36.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 10/2026, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete inventory of vehicles, available immediately and at short notice, on our website. Partial list of features. Full equipment details upon request. Gooseneck: * Gooseneck in SNT design for optimized loading deck length, approx. 3,750 mm, hydraulically liftable/lowerable and detachable * Technical kingpin load: 25,000 kg * Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Lowbed: * Lowbed designed as a telescopic vessel bridge in low-profile construction, extendable at the front with mechanical locking * Length x width approx. 6,850 mm x 2,540 mm * Supply lines run protected in the extendable beams and automatically adjust to the current lowbed length Axles and Suspension: * PENDLE-AXLE * All axles hydro-mechanically forced steered * Hose rupture valve on axle compensation * Cylinders with automatic RESET function * Hydraulic cylinders with shut-off valves and preload pins for securing in raised position * Technical axle load: 12,000 kg each * Hydraulic axle compensation * Tires: 245/70 R 17.5 * Rear chassis with closed external frame, checker plate cover, and continuous prism-shaped excavator recess approx. 1,250/700 x 505 mm, open at the rear Brake System: * Brake system: WABCO EBS-E in accordance with EU regulations, without connecting cables to the tractor unit Paintwork: * Trailer color: RAL 3002 Carmine Red Included Accessories: * Removable steel front wall, approx. 400 mm high * 3 kW electric-hydraulic power pack for hydraulic operations (except hydraulic winches), supply line installation on the tractor unit not included * Outer beams on the gooseneck with mounting holes for bolt-on lashing rings; first hole approx. 200 mm from the front, then every approx. 400 mm; 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear slope of the gooseneck (LC 6,000 daN) * 2" king pin * Locking point approx. every 500 mm on the extension * 1 pair of steel ramps with climbing slats and locking pins for bridging the lowbed receiving hooks * 1 lashing ring each left and right on the front crossmember (LC 10,000 daN) * Lashing rings with retaining spring every approx. 1,200 - 1,300 mm on the outside of the inner beams of the loading deck * Lashing rings with retaining spring every approx. 1,200 - 1,300 mm on the outside of the outer beams of the loading deck (LC 10,000 daN) on the top flange of the outer beams * Cutouts above the lashing rings Ksdpfx Ahox Uvllozodl * 1 hanging lashing ring each left and right outside on the rear crossmember (LC 10,000 daN) on the outer beams of the loading deck * Preparation for removable loading floor * Hanging bar at the front of the rear chassis for loose access ramps to the lowbed * Chassis with beveled rear corners * Hanging bar for loose aluminium ramps on the rear end traverse of the vehicle * Remote steering from front and rear via cable remote control with push-buttons, with axle tracking control, without installation in the tractor unit * Mechanical pin-latch coupling from lowbed to chassis for swapping loading platforms or installing extension beams, with electrical, pneumatic, and hydraulic couplings * Round NATO socket at the front connector bar (Maeler & Kaege VG 96 917) * 2 axle load gauges mounted on the left side Including special accessories: * 1 pair of removable aluminium side walls on the gooseneck, approx. 400 mm high, anodized finish * A

Koşul: ikinci el, boş ağırlık: 11.550 kg, azami yük ağırlığı: 30.450 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2019, bir sonraki muayene (TÜV): 01/2027, yükleme alanı uzunluğu: 13.450 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 700 mm, yükleme alanı hacmi: 23 m³, süspansiyon: hava, renk: kırmızı, Üretim yılı: 2018, vites türü: mekanik, Donanım: ABS, Boş ağırlık: 11.550 kg, izin verilen azami ağırlık: 42.000 kg, yük alanı (U G Y): 13.450 mm x 2.540 mm x 700 mm, yük hacmi: 23 m³, hava süspansiyonu, kaldırılabilir dingil: 1. dingil, elektronik fren sistemi EBS, arka yönlendirme: 3. dingil, çift lastik donanımlı, minimum uzunluk 13,45 m, maksimum uzunluk 18,20 m, boş ağırlık 11.550 kg, kingpin yükü 18.000 kg, toplam ağırlık 48.000 kg, Almanya için istisna izni, uzatılabilir, hidrolik rampalar ayarlanabilir, 3. dingil zorunlu yönlendirmeli, lastik ebatı 235/75R17,5 çift, vinç, muayene geçerlilik tarihi 01/2027, YAMT13XXXJ0102830, bağlayıcı olmayan teklif, hata ve ara satış hakkı saklıdır. Resim, teklifi tam olarak yansıtmayabilir. Kjdpfxsy Dng Te Ahzedl

Koşul: iyi (kullanılmış), toplam uzunluk: 13.500 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2012, zGG: 10.000 kg Teknik durumu: iyi Görsel durumu: iyi Üretim ülkesi: BE Daha fazla bilgi için Christian Theißen ile iletişime geçin. Üretici: Faymonville Model: Euromax STZ-3AUB Üretim yılı: 2012 Ürün türü: İkinci el Veriler: İlk tescil: 2012 Toplam boyutlar UxGxY: 13,50 x 2,55 x 4,00 m Maksimum izin verilen toplam ağırlık: 40.000 kg Boş ağırlık: 10.000 kg Ksdpfx Asy H Dvcohzjdl Lokasyon: Essen Hemen teslim

Koşul: iyi (kullanılmış), toplam uzunluk: 13.350 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.700 mm, Üretim yılı: 2012, Yük kapasitesi: 27.300 kg Azami toplam ağırlık (zGG): 12.700 kg Teknik durum: iyi Kdjdpfx Aoy H Du Sohzol Görsel durum: iyi Üretim ülkesi: BE Daha fazla bilgi için Christian Theißen ile iletişime geçin. Üretici: Faymonville Model: Euromax GTZ-3AUB Üretim yılı: 2012 Ürün tipi: İkinci el Veriler: İlk tescil: 02/2012 Toplam boyutlar (UxGxY): 13,35 x 2,55 x 3,70 m Boş ağırlık: 12.700 kg İzin verilen toplam ağırlık: 40.000 kg Taşıma kapasitesi: 27.300 kg Dingil sayısı: 3 Özellikler: 3 m uzayabilir (16,35 m'ye kadar), zorunlu yönlendirmeli ilave arka dingil, kuğuboynu için hidrolik kaldırma yatağı Konum: Essen Hemen teslim

Koşul: ikinci el, YATAY PRES BASINÇ 80t Kedpfx Ahoihvnmszodl

Koşul: ikinci el, azami yük ağırlığı: 34.030 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2025, bir sonraki muayene (TÜV): 07/2026, toplam genişlik: 2.480 mm, Donanım: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Kdodoy Nu Hkepfx Ahzsl Excerpt from the equipment list. Full specification available upon request. Neck (Gooseneck): * Gooseneck with rear taper approx. 750 mm x 10°, 3 pairs of lashing rings (LC 5,000 daN) * Loading platform with hardwood covering approx. 30 mm thick; platform behind the gooseneck hydraulically height-adjustable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of fold-in lashing rings to the inside, central beam front (LC 10,000 daN) * Grating cover C40/4 (point load approx. 2.3 t on approx. 20 x 20 cm), over the axles checker plate covering Two-piece steel ramps: * One pair of galvanized, heavy-duty two-part steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with C40/5 grating cover (point load approx. 8 t on 20 x 20 cm) * Ramp with hydraulically folding ramp sections and hydraulic lifting device, maximum load per pair: 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm in the driving position are not considered as part of the total vehicle length of 16,500 mm Landing gear: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load) * Tires 235/75 R 17.5 3PMSF * TPMS tire pressure monitoring system according to ECE R 141 Axles: * BPW axles and suspension * 2 rigid axles, 1 trailing steering axle * Technical axle load: each 12,000 kg * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Colors: * Semi-trailer in RAL 3002 carmine red * Rims silver * Tarp in RAL 9006 silver Including accessories: * 1 spare wheel holder below loading platform, right side in driving direction * 2-inch king pins * Galvanized steel front wall * At the galvanized connection strip at the front: yellow-red air couplings * 4 wheel chocks with holder on the front wall * 3 height wooden boards * Galvanized folding supports beneath the ramped section of the loading area * Height-adjustable tarpaulin structure, approx. 3,960 mm? * Galvanized front wall with tensioning mechanism for sliding curtains * EDSCHA roof, height-adjustable by approx. 400 mm, forward slidable on aluminum roof rail profiles (bolted to front and rear walls) * 3 pairs of sliding stakes on the loading platform * The body can be hydraulically widened rear left/right by approx. 750 mm * Sliding tarp with approx. 700 mm reserve in length, with tensioning straps spaced at approx. 600 mm height * Upper edge of body approx. 3,960 mm (loaded) * Driving with an open sliding roof is not permitted and will damage the tarp * Anti-slip sand coating painted onto checker plates on gooseneck and loading platform * Cover plates to bridge the space between ramps and loading platform * Electro-hydraulic unit at the rear under the loading platform * Left and right at the gooseneck and ramps, each with a holder for warning signs, including socket * Ramp control valves positioned on the right side of the trailer * Grating cover in the gooseneck rear slope C30/3 (point load approx. 2 t on 20 x 20 cm) * Grating cover in the loading platform's sloped section...

Koşul: yeni, dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 12.000 kg, izin verilen dingil yükü (dingil 2): 12.000 kg, izin verilen aks yükü (aks 3): 12.000 kg, toplam uzunluk: 9.300 mm, toplam genişlik: 2.540 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, dingil mesafesi: 1.360 mm, renk: mavi, Üretim yılı: 2023, Donanım: hidrolik arka platform, Farbe: Blau Nutzlast: 54.465 kg Hauptmerkmale: Hersteller: Faymonville Modell: MAX 110-Z-4AA-9.30-U Fahrgestellnummer: YAMT14XX4N0107629 Baujahr: Neu und ungebraucht Gewichte / Zuladung: Sattellast: 23.000 kg Achslast: 12.000 kg Gesamte Achslast: 48.000 kg zul. Gesamtgewicht (zGG): 71.000 kg Leergewicht: 16.535 kg Nutzlast: 54.465 kg Achsen: Achsenhersteller: BPW Hydraulische Lenkung Luftfederung mit Hub-/Senkventil WABCO-Bremssystem Bereifung: 245/70 R17.5 – Michelin (Lastindex 146/146 F) 1. Achse als Liftachse Abmessungen: Ladeflächenlänge: 9.300 mm Ausziehbar um: 6.500 + 6.800 mm Ladeflächenbreite: 2.540 mm Ladeflächenhöhe: 900 mm Zusätzliche Informationen: Doppelt ausziehbare Ladefläche Containerverriegelungen Ausschubträger in der Breite + Holz-Ausbauten für Breitenverbreiterung Zurringe Satz doppelt faltbarer Auffahrrampen Zentralschmierung 1x Reserverad + Halter JOST-Stützwinde 24-Volt-Elektrosystem Sattelkupplung 2.0” Eine verzinkte Stahl-Bordwand Elektrisch betriebene Hydraulikpumpe Handlenkung Twistlocks = Additional Information = General Information Year of manufacture: 2023 Axle Configuration Tyre size: 245/70 R17.5 Suspension: Air suspension Rear axle 1: Twin tyres; Lift axle; Max. axle load: 12,000 kg; Steered; Axle brand: BPW; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Kdsdpfx Aouu Hcfehzol Rear axle 2: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 3: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 4: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Weights Unladen weight: 16,535 kg Payload: 54,465 kg gross vehicle weight: 71,000 kg Functional Loading floor height: 900 mm (Note: original value '65535 cm' likely an error, adapted here to correct spec) Extendable chassis: Yes Condition General condition: Excellent Technical condition: Excellent Visual condition: Excellent Financial Information Price: On request Additional Information For further information, please contact Stefan Schaapveld.

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, ilk tescil: 03/2003, yükleme alanı uzunluğu: 12.500 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 1.620 mm, toplam uzunluk: 12.500 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.620 mm, süspansiyon: hidrolik, lastik boyutu: 275 / 70 R22.5, renk: beż, Üretim yılı: 2003, Aks konfigürasyonu Lastik ölçüsü: 275 / 70 R22.5 Aks markası: SAF Süspansiyon: hidrolik süspansiyon Arka aks 1: Çift tekerlekli; kaldırılabilir aks; Maks. aks yükü: 10.000 kg; Yönlendirmeli Arka aks 2: Çift tekerlekli; Maks. aks yükü: 10.000 kg Arka aks 3: Çift tekerlekli; Maks. aks yükü: 10.000 kg; Yönlendirmeli Arka aks 4: Çift tekerlekli; Maks. aks yükü: 10.000 kg; Yönlendirmeli Arka aks 5: Çift tekerlekli; Maks. aks yükü: 10.000 kg; Yönlendirmeli Ağırlıklar Boş ağırlık: 13.100 kg Yük kapasitesi: 61.900 kg Azami toplam ağırlık: 75.000 kg Fonksiyonel Kdjdpfx Aheuu E S Sjzjl Yükleme alanı yüksekliği: 162 cm Durum Teknik durumu: çok iyi Görsel durumu: çok iyi Finansal bilgiler Fiyat: Talep üzerine Ek bilgi Daha fazla bilgi için Stefan Schaapveld ile iletişime geçiniz.

Koşul: ikinci el, Üretim yılı: 2011, Üretim ülkesi: BE Kjdpsy H Dxdjfx Ahzedl Daha fazla bilgi için Theo Lelie ile iletişime geçin.