Kullanılmış Ruchser Ru-Msa satın al (3.647)

Koşul: ikinci el, Üretim yılı: 2013, Toplamda 6 adet mevcut, fiyat masa başınadır Avantajlar: - Alt yapının dar yapısı sayesinde tüm elemanlara her açıdan kolay erişim - Elmas şeklindeki dayanakların çekilmesiyle geniş ayarlanabilir yüzey alanı - Takımlar ve küçük parçalar her zaman montaj masalarındaki raflarda el altında - Destek kirişleri tercihe göre kauçuk, fırça, kaygan şerit veya keçe ile kaplamalı - Cihaz taşıyıcıları kullanıldığında kablo karmaşası yok: makineler her zaman kullanım yerinde el altında Donanım: - Çalışma yüzeyi profilli kauçukla kaplı - Kenar bölgesinde, profillerin uzunlamasına bırakılması için elmas şeklinde dizilmiş dayanaklar - Yüksekliği ayarlanabilir: 900 – 1.100 mm Bodpfx Ajyx Hpcjlielh

Koşul: ikinci el, Üretim yılı: 2000, Fonksiyonellik: tamamen fonksiyonel, 2 adet Ruchser profil kesit taşıma arabası satıyoruz. 12 adet bölme, her biri 90 mm genişliğinde – ancak bu bölmeler kademesiz olarak ayarlanabilir. Genişlik: 850 mm, Uzunluk: 1900 mm Bedpey Dfq Aefx Aliolh Taşıma arabası yüksekliği: 1800 mm

Koşul: yeni, Number of motors: 2 units Working length: 2380 mm Control: , RUCHSER RU-GL-45° ----- Glazing Bead Saw on Slide Work Table Designed for pairwise cutting of glazing beads on a sliding work table. The RU-GL glazing bead saw is mounted on a sliding work table with scanning and clamping system for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw mounted on a manually movable carriage. Pneumatic clamping device from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt covering, length including side storage shelf 3300 mm, width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable counter supports for positioning the sashes. Bedpfoxmkz Njx Aliolh Item 1: RU-GL Double Glazing Bead Saw 45° on RU-SA-3000 ----- For glazing beads up to 30 x 70 mm (W x H)!!!, Mounted on sliding work table with scanning and clamping system for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw on carriage manually movable. Pneumatic clamping device from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt covering, length incl. side storage shelf 3300 mm, width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable counter supports for positioning the sashes. ----- Base price in above configuration: on request! ----- Plus packaging and shipping as well as current material cost surcharge of 6% of list price Options with additional prices: ----- Item 1.1 1 set carbide saw blades for RU-GL glazing bead saw D = 200 mm, 64 teeth, consisting of 1 pc each of saw blade L1233 (left) and L1085 (right), with special grind 43°. Additional cost: 502.00 Euro Item 1.2 Mounting device for scanning gauge on RU-GL for transferring scanning measurements to the saw with pneumatic installation. Additional cost: 635.00 Euro Item 1.3 Scanning gauge for glazing beads, total length 2550 mm, max. scanning length approx. 2450 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for scanning glazing bead length Additional cost: 497.00 Euro Item 1.4 Scanning gauge for glazing beads, total length 1500 mm, max. scanning length approx. 1430 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for scanning glazing bead length Additional cost: 445.00 Euro Item 1.5 Spacer set for rabbeted glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price on request, after inspection of the glazing beads. Depending on the number of glazing beads used, several spacer sets may be required. To determine the exact quantity, we need profile drawings of the glazing beads to be used before order confirmation. Additional cost: on request, after receiving your glazing bead drawings Item 1.6 Operating time switching device for independent extraction unit. Adjustable from 5 sec. to 3 hrs. For every sawing process, extraction runs automatically for the preset time. If another cut is made during the extraction time, the timer resets and extraction starts again from the beginning. Additional cost: 731.00 Euro ----- Total price ...

Koşul: yeni, Working length 2,750 mm Working height 2,500 mm Lifting range of worktable 300–1,000 mm RUCHSER Glazing and Sealing Table RU-SW3-90° ----- Vertical worktable with lifting mechanism and tilting device. Particularly suitable for glazing and two-sided sealing of timber windows. Equipment features: - Support area covered with felt - Infinitely adjustable pneumatic lifting mechanism, lifting range from 300 mm to 1,000 mm (relative to roller conveyor height) - Tilting device for two-sided sealing, with 150 mm roller conveyor - Roller length - 2 pneumatic clamps for securing the window to the tilting device - Version with special tilting device for passing the window set up on the roller conveyor through the closed tilting device Alternative/optional equipment available on request! Item 1.0: Article no.: 100000 RU-SW3-90° Vertical worktable for timber windows with tilting device for glazing and two-sided sealing Angle length: 1,970 mm, Opening angle: 90°, Max. working width: 2,750 mm, Total length: 3,050 mm, total width: 780 mm, Support height: 1,600 mm, Support surface with felt, left OR right one roller as edge protection for elements up to 2,500 mm height. Pneumatic lifting unit from 300–1,000 mm. Work surface as roller conveyor with steel rollers, roller length and spacing: 200 mm. ----- Total price for this configuration: on request! ----- Options at extra charge: Item 1.1: Article no.: 5202 EUR 773.00/unit Support section with rubber rollers, Ø 48 mm, roller spacing 50 mm, for RU-SW3-90° and RU-SWS3 Item 1.2: Article no.: 7081 EUR 440.00/unit Steel angle covered with felt mounted above the roller strips for RU-SW3-90° Prevents windows from “chattering” when being pushed. The additional strips are mounted above all roller strips of the RU-S2. Bledexmk D Repfx Alijh Item 1.3: Article no.: 5056 EUR 147.00/unit RU-AK-6 storage tray 1000x120 mm, 6 compartments, for hanging in the roller conveyor ----- Total price for this configuration: on request! Ex works plus packaging and shipping, plus statutory VAT. PDF brochure attached. (Technical details according to manufacturer – subject to confirmation!)

Koşul: yeni, Fitting Storage: Yes Working width: 3,000 (3,500) mm Swiveling: Yes Ruchser RU-BM-3000 (Option: 3500) Sash Assembly Table ----- Manufacturer Description: Item 1.0 Article 0610000 RU-BM-3000 Sash assembly table, for sashes up to max. 2,500 mm height with RU-SH, special screwdriver, length 3,000 mm, width 1,400 mm, inclination of the work platform manually adjustable. Usable width 2,500 mm Holder for fitting shears or fitting punching tool. 10 pivotable hanger arms for suspending sashes, completely pneumatically foldable for unobstructed movement of the sashes on the table surface. Gauge for measuring sash hardware length for consistent and variable/central handle positions and any handle height for pre-drilled sashes, colored measurement identification for the fittings. Hanger arm height can be set at a stop to either 50 or 60 mm. RU-SH, special screwdriver with pneumatic depth stop mounted on carriage, safety control system, pneumatic height adjustment, screw feeder with automatic shut-off of the feed container, manual insertion for a second screw length at the special screwdriver, accessories. RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4 pendulum rail manually adjustable in depth to the left and right with one 4-position turret stop each. PSF - Pneumatic clamping device for the sash against the side stops. Working height adjustable from 900 to 1,000 mm. Please specify if felt, sliding, or brush strips are required as support. Item 1.1 Article 6315 RU-BM-... hardware adjusted as per customer specs Item 1.2 Article 0500000 Bracket adapted to customer’s punching/shear tool. For mounting a third-party fitting punching tool or fitting shears (non-Ruchser) on the sash assembly table. Please specify make when ordering! ----- Price RU-BM-3000 as described ex works: On request! ----- Options for Fitting Storage for RU-BM-3000: ----- Version: Fixed mounting, Price EUR 5,468.00 Article 0630000 RU-BL-30/30 Fixed Fitting Storage Mounted above the sash assembly table Length 3,100 mm, depth 1,250 mm, with three shelves each with 10 compartments separated by dividers. Version: Freestanding fitting storage: Price EUR 6,017.00 Bljdpfxot Tq Aas Alieh Article 0710000 RU-SBL3000/30 Freestanding fitting storage, Length 3,100 mm, depth 1,250 mm, height 2,050 mm, frame at the front without supports, 30 compartments, arranged in one row of 10 each, separated by dividers, and a continuous top shelf, Compartment size: width 280 mm, height 150 mm. 4 pcs. angle shelves for corner drives: Price EUR 609.00 Leg dimensions 120x120 mm; angle approx. 3°. The front edge of the angles is raised 5 mm to prevent accidental discharge. 2 on the left and 2 on the right under the first shelf of the fitting storage. ----- Upgrade price for RU-BM-3500 ----- Article 0610300 RU-BM-3500 Sash assembly table for sashes up to max. 3,000 mm height with RU-SH, special screwdriver, length 3,500 mm, width 1,400 mm, platform inclination manually adjustable, usable width approx. 3,000 mm Upgrade price from RU-BM-3000 to RU-BM-3500: EUR 2,811.00 Fitting storage for RU-BM-3500 (freestanding only): Price on request.

Koşul: yeni, Staple length, mm Staple width (Rieker width), mm Impact energy, Nm Bsdpfx Aloxpi Efoiolh Painting aid for simultaneous coating of sash and glazing bead frame RU-LH Painting Aid for Glazing Bead Frames For processing staples L=50 mm Length 700 mm, width 500 mm, working height adjustable from 700 to 1200 mm. At each of the 4 corners of the glazing bead frame, one staple is inserted. Positioning is done diagonally in such a way that the staples protrude approx. 35 mm from the wood. When pressed into the sash frame, the frame is clamped in place. For painting, the glazing bead frame is positioned approx. 20 mm in front of the sash. After drying or before mounting the sash, the glazing bead frame is pressed flush into the sash and only removed again just before glazing. The staples can then be manually extracted. Stand frame with support table, vertical 85°, inclination adjustable. Two compensating frames for different glazing bead thicknesses, operated via foot pedal. Price on request plus packaging and shipping Optional with extra charge: Box of staples 26 x 50 mm, 4,300 pieces EUR 77.00 You can find footage of the painting aid at the end of the adjacent video! (Technical data according to manufacturer – subject to change!)

Koşul: yeni, Dimensions (L x W): 1400 x 1750 mm Weight: kg Swiveling: yes/no – yes Bedpox H Al Ajfx Alislh RUCHSER Assembly Tilt Table RU-MKS 1.4 ----- Universally applicable work table, e.g., for frame assembly, roller shutter box assembly, muntin bar work, sash hardware installation, glazing. Equipment – alternative/optional equipment available on request! Pos. 1.0: Item no.: 8820000 RU-MKS-1.4 Assembly Tilt Table Basic dimensions: 1400 x 1750 mm, extended: 3400 x 2500 mm. Support surface with 3 support rails, 2 of which are adjustable, one fixed on the upper extension, covered with felt. Support surface with width and height/depth extension. Pneumatic tilt mechanism, load capacity 130 kg. Operated via foot valve. Roller conveyor manually foldable and extendable sideways from 1400 to 2500 mm, roller length 140 mm when closed. Roller conveyor height in vertical table position adjustable from 300 to 380 mm, working height in horizontal position adjustable from 920 to 970 mm. !For safety reasons, at least one flat clamping cylinder must be ordered! Pos. 1.1: Item no.: 5582 Pneumatic swivel unit for roller conveyor for MKS Pos. 1.2: Item no.: 21127 Support rail 1400 mm non-extendable for RU-MKS Pos. 1.3: Item no.: 5585 360° rotating unit with pneumatic locking in 180° increments Rotary brake with double-sided operation. When using the rotating unit, the minimum roller conveyor height of the MKS table increases to 330 mm. Pos. 1.4: Item no.: 6455-01 6 storage bins with 2 compartments each, mounted swiveling; for RU-MKS Pos. 1.5: Item no.: 5597-10 Travel gear for semi-circular rail for RU-MKS-P4, operated by foot valve, mounted on roller conveyor side. Pos. 1.6: Item no.: 6354-6 3 double meters of semi-circular travel rails, 30 x 10 mm. Pos. 1.7: Item no.: 5193-1 Flat clamping cylinder with hand valve, clamping range 130 mm, foldable Mounted on support rail, felt pad on contact part, installation left or right—please specify. Pos. 1.8: Item no.: 5584 Lifting unit 450 mm for working on vertical elements. Operated by foot valve. Maximum load capacity: 200 kg for RU-MKS...-1.4 and 140 kg for RU-MKS...-2. Pos. 99.1 Packaging on pallet ----- Total price for this configuration: on request! Video and PDF brochure attached. (Technical specifications according to manufacturer – subject to change without notice!)

Koşul: yeni, Number of motors: 2 units Working length: 2650 mm Control: manual Ruchser RU-GLS-ED 45° Glazing Bead Saw ----- Designed for pairwise cutting of glazing beads The RU-GLS-ED45° Double Glazing Bead Saw is manually adjustable to length. The machine has been developed for pairwise cutting of glazing beads at a cutting angle of 45°, and it features one fixed and one movable saw unit. Length adjustment is manual and comes equipped with an electronic digital display. Cutting lengths from 150 mm to 2650 mm can be achieved. During the cutting process, the glazing beads are clamped from above and from the front using a pneumatic clamping device in order to prevent tilting of the beads. Operation is via a safe two-hand control system. Saw blade diameter: 250 mm, Length: 3700 mm, Width: 700 mm, Voltage: 400 V. Item 1: RU-GLS-ED45° Double Glazing Bead Saw ----- With manual length adjustment, for pairwise cutting of glazing beads, cutting angle 45°. Manual length adjustment with electronic digital display, cutting lengths from 150 - 2650 mm. Pneumatic clamping device from above and in front. Safety two-hand operation, saw blade diameter 250 mm, length 3700 mm, width 700 mm, voltage 400 V. ----- Base price for the above version: on request! ----- Ex works. Packaging and shipping extra Options with additional prices: ----- Item 1.1 Spacer set for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price on request, after inspection of the glazing beads. Depending on the number of glazing bead profiles used, several spacer sets may be required. To determine the precise quantity, we require profile drawings of the glazing beads to be used before order confirmation. Additional price: on request, after submission of your glazing bead drawings Item 1.2 Mounting device for gauge on RU-GL for transferring the measured dimensions to the saw, with pneumatic installation. Additional price: 611.00 Euro Item 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. measuring length approx. 2450 mm Measuring gauge made from square profile with 2 fixed and 2 adjustable stops for measuring the length of glazing beads Additional price: 478.00 Euro Item 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. measuring length approx. 1430 mm Measuring gauge made from square profile with 2 fixed and 2 adjustable stops for measuring the length of glazing beads Additional price: 428.00 Euro Item 1.5 Operating time switch for independent extraction system. Adjustable from 5 seconds to 3 hours. At each sawing operation, the set extraction time activates automatically. If another cut is made within the extraction cycle, the preset extraction time restarts from the beginning. Additional price: 702.00 Euro Item 1.6 Set of carbide saw blades RU-GLS-P45 and RU-GLS-ED45° D = 250 mm x 3.2/2.2 x 30, 80 teeth, comprising 1 piece saw blade L6444 (right) and L6443 (left), with special 43° grind. Additional price: 576.00 Euro ----- All prices in Euro, net, plus statutory VAT. Blodpjxmk Dqjfx Alieh (Technical specifications according to manufacturer, without guarantee!)

Koşul: ikinci el, Boyutlar (L,W), mm Ağırlık yaklaşık 90 kg Yüksekliği ayarlanabilir (evet/hayır) evet Strok 300 - 800 mm Çalışma masasının destek yüzeyi 1.700 x 1.500 mm Masa genişliği maks. 3.800 mm Yük kapasitesi yaklaşık 130 kg Ruchser RU-4-SSP döner eğimli tabla ----- Destek yüzeyi 1700 x 1500 mm, maksimum Masa genişliği 3800 mm dışarı doğru açıldı, Pnömatik olarak eğilebilir, hava koşullarına dayanıklı girinti, her biri 2 bölmeli, altta çekmeceli 6 saklama kutusu ile genişletme için, 2 destek ayağı ve 2 düz sıkıştırma silindiri ile, 300 - 800 mm arası kaldırma cihazı, Yüzey olarak rulolu konveyör, katlanabilir. Yük kapasitesi 130kg. 4 döner tekerlekli sürüş cihazı Cihazı durdur (RU-4SSP) Son denetim için 2 durak ve Fok Alet tepsili kanat montaj cihazı ve ayarlanabilir durdurma RU-4-SSP için eğim Blodpfx Alsvu Hfdsieh Matkap tutucusu, tornavida tabancası vb. tornavida kılıfı ile Flanşlı makaralı tahrik cihazı RU-DKFA ve RU-4SSP 3 çift metrelik ray Sürüş cihazı 25 x 10 mm ----- Yukarıdaki makinenin fiyatı talep üzerine! artı paketleme ve nakliye ----- (üreticiye göre teknik veriler - garanti edilmez!)

Koşul: iyi (kullanılmış), Üretim yılı: 2010, Malzeme kaldırıcı, yerleştirme yardımcısı, montaj kaldırıcı, Superlift Contractor, kaldırma lifti, konveyör bant, kayışlı konveyör, taşıma bandı; cihaz, profillerin çift gönye testereler, folyo hatları, takviye makineleri, otomatik yükleyiciler, işleme merkezleri vb. gibi makinelere tek bir kişi tarafından yerleştirilmesine olanak sağlar. -Üretici: Ruchser, yerleştirme yardımcısı tip RU-AH -Taşıma kapasitesi: 30 kg -Kaldırma yüksekliği: 345 ila 1080 mm -Konveyör bant: Krups KF30 -Konveyör uzunluğu: 2200 mm Bsdpfxjyapglj Alijlh -Bant genişliği: 75 mm -Hız: frekans kontrollü 8 - 50 m/dk -Ölçüler: 2220/1000/H1370 mm -Ağırlık: 216 kg

Üretim yılı: 2013, Koşul: ikinci el, Cihaz, profillerin çift açılı testere, folyo kaplama hatları, takviye makineleri, besleme magazinleri, işleme merkezleri vb. makinelere tek bir kişi tarafından yerleştirilmesine olanak tanır. Bedjxykvgopfx Alijlh

Koşul: mükemmel (kullanılmış), Uzunluğu 5000 + 6000 mm, genişliği 600 mm olan, üzerine keçe veya yağlı raylar döşenebilen rulolu konveyörler. Bledjmt D Raopfx Alioh birden fazla mevcut! Lütfen talep edin

Koşul: iyi (kullanılmış), Üretim yılı: 2020, arka tarafa monte edilmiş, 4 raflı 650x300 mm boyutunda ve uzun parçalar için 4 destek kolu bulunan raf sistemi delikli arka panel çalışma alanı aydınlatması el çarkı ile yükseklik ayar sistemi (her dönüşte 5 mm hassas ayar) bağlantı montajı için tekli profillerin sıkıştırılmasına yönelik pnömatik sıkıştırma düzeneği, 180° dönebilen, 30° adımlarla kilitlenebilir, kilitleme pnömatik olarak etkinleştirilmektedir Bodpfx Aszab Smelielh profil uzunluk yönünde sıkıştırma pozisyonu ayarlanabilir 45-120 mm yapı derinliğinde ve 50-150 mm çalışma genişliğinde profiller için 7 mm aralıklarla ayarlanabilir sıkıştırma aralığı 4 pnömatik bağlantı, 5 elektrik bağlantısı, el matkabı veya tornavida vb. için 2 askı, alet rayında hareketli olarak monte edilmiş tablonun sağ yarısında çekmeceli çıkartma

Koşul: yeni, Glazing Bead Nailing Machine "2 P Jumbo automatic E.C." - new - Your advantages: - Corner joints are closed - No open glazing bead seams - No color discrepancies during painting - Glazing bead frames can be easily assigned Staple Corner Jointing Machine 2P Jumbo Automatic E.C. for stapling glazing bead frames. Choice between automatic and manual operation; With angle stop and clamping devices from above and the front Pressure can be regulated separately. Parallel and overlapping staple insertion is possible via electronic programmable control. The stapling unit can be mounted on an appropriate work table, operated via foot pedal. ----- Price for this configuration on request! Plus statutory VAT and packaging/shipping ----- Pictures show the 2P Staple Corner Jointing Machine with the optional mobile work table (see details under "additional charges") Additional charges: ----- Mobile work table Height adjustable from 700 - 1000 mm 2 removable support rails, each 1000 mm long 2 swiveling and sliding support rails, 1000 mm each Support rails covered with felt 4 castors, 2 of which have locking devices ----- Additional charge: 1,311.00 EUR net Staples: Packages 15 mm staples (pack of 2,000 pcs): Price EUR 22.00 12 mm staples (pack of 3,000 pcs): Price EUR 32.00 10 mm staples (pack of 3,000 pcs): Price EUR 32.00 Dimensions and weights ----- Jumbo Automatic E.C. 470 x 370 x 300 mm, 35 kg Work table 32 kg Blsdpevnh T Nefx Alish All prices net. Plus statutory VAT, ex works, plus packaging and shipping (Technical data as per manufacturer – subject to change)

Koşul: iyi (kullanılmış), Üretim yılı: 2022, yakıt türü: elektrikli, CE-marking: yes Technical condition: good Visual condition: good Please contact Tobias Mayr for further information. Uplifter UPG-600-2 Vacuum Lifter Glass Suction Device up to 600kg The UPG 600-2 glass suction lifter is the specialist for lifting and moving glass elements of up to 600 kg. Thanks to its modular construction, the UPG 600-2 can be optimally adapted to meet the on-site requirements. Its extension arms allow for handling even large-scale elements. The support arms can, of course, be removed. The attached suction pads (diameter 300 mm) ensure solid adhesion and maximum application performance on the job site. When suctioning, it is important that the surface is always smooth, flat, and airtight. The UPG600-2 performs the suction process automatically at the push of a button. After suctioning, the UPG 600-2 suction unit continuously and independently monitors the vacuum pressure. In the event of vacuum loss, the UPG 600-2 automatically re-pumps and additionally warns with an audible alarm signal in case of impending vacuum pressure loss. With its independent power supply, the UPG 600-2 is the ideal installation partner. The replaceable 12V battery can be recharged, and the charge level can be easily checked on the LED display. Furthermore, the regulated vacuum pump ensures up to 8 hours of continuous operation. The vacuum lifter can be individually adapted to the respective installation situation. The suction unit can be manually rotated 360 degrees and tilted 90 degrees. When rotating, the suction device can be locked in place every 40°. Manufacturer: Uplifter Model: UPG 600-2 Year of construction: 10/2022 Bljdpsy Ttqiofx Alioh Net weight approx. 173 kg Load capacity up to 600 kg Dual-circuit system Minimum unit depth: 150 mm Manual rotation 360° (locks every 90°) / tilting without lock Complies with DIN EN 13155 Including wheeled transport frame, see images Other: Affordable delivery possible throughout Europe. Viewings by appointment only. We are happy to accept your machines/construction equipment in part exchange. We can also offer you customised financing or leasing options. (for commercial customers only) If you have any questions, please contact us. All prices are ex-location 86684 Holzheim. All information is subject to change. Errors in transmission and interim sales excepted. All specifications regarding colour, equipment, condition, features, etc. of the offered vehicles are given without guarantee. Errors, mistakes, and prior sale excepted.

Koşul: yeni, In the enclosed PDF document, you will find the detailed descriptions of the items – prices are available upon request! Blodpfx Ajytx Urslijh RUCHSER standard offer including layout for a timber window production line with profiled glazing bead and screwed corner joints. Daily capacity approx. 15 windows The manufacturing line consists of: Pos. 1.0 – Item 107850000 RU-PWD-H1600/130/4 Double-sided Profile Cart Length 1600 mm, width 850 mm, height 2140 mm For horizontal storage and transport of profile cuttings. 12 storage arms per column, firmly welded to the column, 2 middle columns adjustable, clear spacing of the storage arms 130 mm, depth of each storage arm per side 400 mm, storage arms covered with felt, fitted with 4 plastic swivel castors, diameter 150 mm, 2 of which with brake. Pos. 2.0 – Item 0150001 RU-M Turn-and-Tilt Table Manually tiltable, support surface 1300 x 1400 mm, with 4 plug-in extensions, each 1000 mm long, including tool tray, without weather bar recess. Pos. 2.1 – Item 5009-1 2 storage bins each with 2 compartments (for RU-4; RU-2/4) Pos. 2.2 – Item 5062-1 Left and right extension 500 mm and upward 7000 mm with one folding support leg each Pos. 2.2 – Item 5012-1 Swivelling extension tubes Length 700 mm (max. 3 pairs) Pos. 2.4 – Item 6125-2 Corner assembly device As right-angled stops, pneumatically lowerable, with clamping unit for 2 profiles, mounted on RU-M Pos. 2.5 – Item 2069-1 Tilting mechanism Pneumatically operated instead of manual Pos. 3.0 – Item 10782000 RU-EW-2S Double-sided Storage Cart Max. storage capacity 36 sash frames, L-shaped screwed, length 1200 mm, depth 800 mm, height 2200 mm, support beams covered with felt, 4 swivel castors, 2 with brake Pos. 4.0 – Item 6600000 RU-KWI-1000 Order Picking Cart Nestable when empty, length 1120 mm, width 1100 mm, usable width 850 mm, height 1900 mm, base height 1500 mm, load capacity 750 kg, mobile on 4 plastic swivel castors, diameter 150 mm, 2 with brake, 2 extractable racks left and right, each 350 mm long, max. 1800 mm wide, and max. height 2100 mm Pos. 5.0 – Item 740-300 RU-DH-F2 Double Spool Cart for 2 Rolls For roll size up to 620 x 350 mm (without reel), up to 800 x 350 mm (with reel), with 4 swivel castors, 2 with brake Pos. 5.0a – as alternative to Pos. 5.0 – Item 744-200 RU-DH-F4, Double Spool Cart for 4 Rolls For roll size up to 620 x 350 mm (without reel), up to 800 x 350 mm (with reel), with 4 swivel castors, 2 with brake Pos. 6.0 – Item 7360000 RU-BW-1200 Fitting Cart With 16 compartments, length 1200 mm, width 700 mm, height 1100 mm, with 2 storage shelves, mobile on 4 plastic swivel castors, diameter 125 mm, 2 with brake Pos. 7.0 – Item 10009200 RU-FMOG/K Sash Assembly-Turn-Tilt Table ...

Koşul: yeni, Ruchser Standard offer with layout for a timber window production line with machined glazing bead and screwed corner joints. Daily capacity approx. 30 windows Production line consists of: Pos. 1.0 – Item 107850000 1 unit RU-PWD-H1600/130/4 profile cart, double-sided, length 1600 mm, width 850 mm, height 2140 mm, for horizontal storage and transport of profile cuttings. 12 pairs of storage arms per column, solidly welded to the column, 2 central columns adjustable, clear spacing of storage arms 130 mm, depth per side 400 mm, arms covered with felt, with 4 polyurethane swivel castors, diameter 150 mm, 2 with braking device. Pos. 2.0 – Item 10776000 Bljdpfeytx Ulox Alieh 1 unit RU-MSTR assembly station for frame hardware, 3000 mm long, 600 mm wide. 1 hardware tray, 1 felt-covered work table, working height adjustable between 900 – 1100 mm (without screwdriving units). Pos. 2.1 – Item 6747 1 running rail with trolley, 3000 mm in length. Pos. 2.2 – Item 6308 1 balancer for equipment from 3 to 5.5 kg. Pos. 2.3 – Item 10778000 1 unit RU-STS-A inline screwdriver with automatic screw feeding system POWASERT, consisting of inline screwdriver and feeder unit ADS-MF4, complete with hose connections, inline screwdriver ADS 2445 RD with torque shut-off, preset for the customer’s screw feed system. Suitable for the following screw dimensions: Shaft diameter: 2.4 – 4.0 mm Shaft length: 10 – 35 mm Head diameter: 5 – 8 mm When ordering, information on the screws must be sent to the manufacturer. Pos. 3.0 – Item 10782000 1 unit RU-EW-2S storage cart, double-sided, max. storage capacity 36 sash frames, L-shaped screwed, length 1200 mm, depth 800 mm, height 2200 mm, support rails covered with felt, 4 swivel castors, 2 with brakes. Pos. 4.0 – Item 10766000 1 unit RU-DR-1 rotary table with drive unit for frame assembly. Table with parking brake. Support platform with cross beams and pull-out extensions to the left and right with felt covering. Base dimensions 1400 x 1400 mm, extensible up to 2500 x 1400 mm, working height adjustable from 900 – 1100 mm. Pos. 4.1 – Item 5360-01 1 fixed tool tray, 1000 x 400 mm for RU-DR-1. Pos. 4.2 – Item 6354 1 unit triple-meter running rail for drive unit, rail height 10 mm. Pos. 4.3 – Item 6454 1 driving unit with flange-guided wheels and parking brake. Pos. 4.4 – Item 6788 1 unit corner screwing device. 1 pair of pneumatically height-adjustable clamping units to fix profiles at right angles. Pos. 5.0 – Item 10383000 1 unit RU-DK-T14/34 tilt-and-turn table with pneumatic tilting device. Work platform with 4 support rails, base dimensions 1400 x 1500 mm, extended 3400 x 2300 mm. Support table with felt covering. Tilting table height adjustable from 900 – 950 mm. 2 mounting plates, foldable and displaceable.

Koşul: yeni, Tek parça için otomatik: Evet E/H Bsdsytx T Ujpfx Alislh Çerçeve için otomatik: Evet E/H RUCHSER Pencere Üretim Makineleri Ahşap-alüminyum pencerelerde klips yerleştirme işlemi, akış halinde ve bir kanat dayama masasında gerçekleştirilmektedir. Aşağıdaki videolarda gösterilmektedir: 1. Bir kanat dayama masasına monte edilmiş klips yerleştirme otomatiği 2. Akış halinde, preslenmiş çerçevede klips yerleştirme 3. Akış halinde, tek parçada klips yerleştirme Açıklamalı broşürü yanındaki PDF dosyasında bulabilirsiniz. Fiyatlar talep üzerine! (Teknik bilgiler üreticinin verdiği şekildedir – garanti verilmez!)

Koşul: yeni, Manual handheld device Yes Y/N Automatic for frames Yes Y/N RUCHSER Window Manufacturing Machines Manual insertion of clips in timber-aluminium windows with feed system. Pos. 1 RU-WAL-C, auxiliary trolley with extension arm Length: 4000 mm, swivel range: 120°, total height: 2900 mm, storage bins, 1 drawer, counterweight 50 kg and 2 support feet Trolley length: 850 mm, depth: 700 mm, mobile on 4 swivel castors, 2 of which have brakes, 3 carriage units for hose pack screwdriver. Pos. 2 Holding device for L7355 - ADS-MF 4 automatic screw feeder mounted on the RU-WAL-C at approx. 1800 mm. Pos. 3 RU-CS-ST-M, rod screwdriver ADS-2545A with screw feed unit ADS-MF4 and aluminium holder box for accommodating spindle or feed channel is adapted to the aluminium holder. The screwdriver is manually guided and features automatic torque shut-off and manual blade advance. The clip or screw holder is stored in a container/box and fed in manually to the feed channel in the correct orientation. Using compressed air, the holder is moved into the correct screw position. As an option, clip or screw holders of the same geometric shape can be screwed. The box also serves as a stop plate from above. Two positioning stops allow the depth distances to be set using detent pins. For more than 3 screw positions in depth, it is advisable to use a separate set of positioning stops for sashes and frames. The depth dimensions must be specified when ordering. Pos. 4 Balancer for devices 3-5.5 kg A brochure with description can be found in the attached PDF document. Prices on request! Bljdpoyrtymefx Alioh (Technical details according to manufacturer – subject to change without notice!)

Koşul: yeni, Üretim yılı: 2015, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 15VWL1032, Makine, aşağıdaki aralıkta elektrik kaplinlerinin üretimi için fikstürler içerir: 250 - 800 mm SDR11 355 - 1200 mm SDR17 Bjdpfeu Itk Rex Alislh 900 - 1200 mm SDR26 Orijinal MSA çizimleri de dahildir. VWL 1200, orta ila büyük bağlantı parçaları veya boruların döşenmesi için tasarlanmış CNC kontrollü dikey üç eksenli bir elektrikli boru döşeme makinesidir. Makine tipik olarak 250 ila 1400 mm iç çap aralığında (1400 mm SDR17) bağlantı parçaları üretebilir. Tel döşeme döngüsü sırasında füzyon göstergelerini delmek veya dış profil oluşturma döngüsü sırasında uç delikleri delmek için isteğe bağlı 2 eksenli bir CNC delme ünitesi mevcuttur. VWL 1200, kaplin tasarımının ayrılmaz bir parçası olan yenilikçi bir özelliğe kenetlenen özel fikstürler kullanır, böylece kaplinin her yarısında ayrı bir füzyon bölgesi bulunur. Telin döşenmesi işlemi kaplinin ucundaki bir kelepçede başlar. Tel, füzyon bölgesinin sonunda gerekli adımın iki katı ile yerleştirilir, bunun üzerine takım sistemi döner ve ardından ikinci kelepçede dinlenme konumuna ulaşana kadar ilk döşenen adım arasında ters yönde hareket eder. İşlem kaplinin ikinci kısmında tamamlanır. VWL 1200 sistemi, daha büyük kaplinlerin (tel yerleştirilmeden önce bile yaklaşık 300 kg ağırlığa kadar çıkabilen) yüklenmesine ve boşaltılmasına izin verecek şekilde tasarlanmıştır. Makinenin üstü tamamen açıktır ve bu da bir portal sistemi kullanılarak üstten kolay yükleme yapılmasını sağlar. Alternatif olarak, parçalar uygun kavrama ve taşıma ekipmanı kullanılarak ekstra geniş operatör kapısından yüklenebilir.

Koşul: yeni, Assembly line consisting of: Item 1.0 / RU-CBM 4000 Work Table with an extended guide rail by 500 mm for the additional installation of an aluminum holder screwdriving unit for RU-CSA-SMB or RU-CSA-SMZD, including RU-SH special screwdriver, support table. Length: 4000 mm, Width: 1400 mm, the inclination of the work platform is adjustable manually. Receptacle for hardware shears or punching tool. 16 swivel-type counter holders for hanging sash elements, fully pneumatically retractable to allow unobstructed sliding of sashes on the table surface. Device for detecting sash hardware length for constant and variable/centered gear positioning for pre-drilled sashes, color-coded measurement recognition of the hardware components. RU-SH, special screwdriver with pneumatic depth stop mounted on trolley, safety control, pneumatic height adjustment, screw feeder with automatic shut-off of the reservoir (manual feed for a second screw length on the special screwdriver optional). RA-8, turret stop for 8 screw levels mounted on the trolley. RA-4, turret stop for 4 different sash widths mounted on the tilting table. Sash measurement scanning pneumatically actuated, scanning range up to 2500 mm with simultaneous clamping of the measuring device. PSF – Pneumatic clamping device for sashes. Adjustable working height from 900 - 1000 mm. Support table covered with felt. Guide rail extended 800 mm to the left. Item 1.1 / 5035-1 Pneumatic tilting device for the work surface with foot valve. Item 1.2 / 0500000 Bodpsd Ih Huofx Alislh Bracket adapted for customer-supplied punch/shear. For mounting a customer-supplied hardware punch or shears (external make) to the sash assembly table. Please specify brand upon ordering! Item 1.3 / 5597-7 Travel device for RU-CBM on semi-circular rails. The guide rollers are mounted to the left and right on the base frame of the table. Item 1.4 / 6354-6 3 double meter semi-circular rails 30 x 10 mm. Item 1.5 / 0730000 RU-SBL3000/40 hardware storage, freestanding, length 3100 mm, depth 1250 mm, height 2200 mm, rack on the front side without supports, 40 compartments, divided into 10 units by partitions per row and one continuous shelf on top, compartment size: width 280 mm, height 150 mm. Item 2 RU-CSA-SMB Alu-holder screwdriving unit with automatic screw feeding and manual insertion of the aluminum holders from a mobile box with pneumatic positioning. Screwdriver with depth stop and 4-position turret stop. Pneumatic Y-axis adjustment for two 6-position turret stops. Hopper for manual feeding of rotary or clip holders in square format 18.5 x 18.5 mm. The holder is manually inserted into a channel in the box and positioned in front of the screwdriver mouthpiece by a pneumatically actuated pusher. Profile depth max. 150 mm, screw pitch in Y-direction max. 120 mm. Item 3 RU-S48-A6-350 column-mounted slewing crane for chain hoist, with 6 m aluminum jib Design with static column, lightweight travel jib and trolley. Slewing and trolley movement is manual by pushing and pulling at the load. Jib length: 6 m Overall height: 4,461 m Underside of jib: 3.722 m (upper edge of jib: 3.9 m) Max. slewing range: 270° Steel structure painted in RAL 7035 The base plate is fixed to the customer’s factory floor with ...

Üretim yılı: 2012, Koşul: mükemmel (kullanılmış), 90° döndürme tertibatlı pencereler için Ruchser makaralı konveyör sol/sağ uzunluk 4400mm Pnömatik olarak dikey 7° ile eğilebilir 2 paralel sistem parçasına sahip elektrik tahrikli biriktirme silindirleri dışarıdan içeriye dikey 7°. Kauçuk makaralı şeritlerle 1900 mm yüksekliğinde sistem parçaları. Kayar yüzey klips tutucuları için kauçuk şeritler arasında 2 mm daha derin paslanmaz çelik plakalar. Bledpfjlpcc Ijx Alijh Kauçuk silindirler olarak 3000 mm yüksekliğe kadar kenar koruma silindirleri ile giriş ve çıkış. Giriş yolu 2000 mm, çıkış yolu 4000 mm tahrikli biriktirme silindirleri. Serbestçe ayarlanabilen stand üzerine monte edilmiş kontrol ve kumanda elemanı.

Koşul: ikinci el, Üretim yılı: 1980, Fonksiyonellik: tamamen fonksiyonel, taşlama uzunluğu: 5.000 mm, taşlama taşı çapı: 750 mm, taşlama çapı: 580 mm, merkezler arasındaki iş parçası ağırlığı: 4.000 g, Kullanılmış dış silindirik taşlama makinesi Gioria RU/S 5000 – Büyük parçalar için yüksek hassasiyetli taşlama teknolojisi Ağustos 2025'ten itibaren satışta olacak - elektrikle izlemek mümkün! Bu sağlam ve hassas dış silindirik taşlama makinesi Gioria RU/S 5000, 5.000 mm uzunluğa ve 4.000 kg ağırlığa kadar olan iş parçalarının işlenmesi için geliştirilmiştir. Hidrostatik taşlama mili yatakları ve güçlü 20 kW tahrik sistemiyle, ağır hizmet tipi işleme ve yüksek hassasiyetli bileşenlerin üretiminde kullanım için ideal olan, maksimum hassasiyet ve mükemmel taşlama sonuçları sunar. 🔹 Başlıca Özellikler: ✔ Maksimum. öğütme çapı: 580 mm ✔ Taşlama uzunluğu: 5.000 mm ✔ İş parçası ağırlığı: 4.000 kg'a kadar ✔ Titreşimsiz çalışma için hidrostatik taşlama mili yatağı ✔ Verimli malzeme çıkarma için büyük taşlama tekerleği Ø 750 mm ✔ Farklı iş parçalarına optimum uyum sağlamak için sürekli ayarlanabilir iş parçası mil hızı (10–180 dev/dak) ✔ Hassas uzunlamasına hareketler için hidrolik masa tahriki (0,05 – 4,0 m/dak) ✔ Kesin teslimat için X ekseninde dijital ekran Maksimum verimlilik için güçlü ekipman Makine, aşağıdakileri içeren kapsamlı aksesuarlarla donatılmıştır: ✅ Kağıt bant filtreli soğutma suyu temizleme sistemi (tank kapasitesi: 450 litre) Bljdpfxev Tnhwe Alijh ✅ Esnek işleme seçenekleri için 6 taşlama tekerleği tutucusu ✅ Uzun bileşenler için istikrarlı iş parçası kılavuzu sağlayan 8 sabit yatak ✅ Taşlama çarkının hassas bir şekilde işlenmesi için kuyruk mili üzerine yerleştirilmiş düzeltme cihazı Hemen kullanıma hazır – Stuttgart’ta görüntüleme mümkün! Bu makine şu anda hala çalışır durumda olup, gösterilebilir. Daha fazla bilgi: Merkez yüksekliği 300 mm Merkez mesafesi 5000 mm Maksimum. iş parçası çapı 580 mm Maksimum. sabit yataklama ile iş parçası çapı 30 – 400 mm Maksimum. merkezler arası iş parçası ağırlığı 4000 kg MK 6 iş kafasında montaj konikliği MK 6 kuyruk milindeki konik Çalışma voltajı 400V/ 50 Hz Makine ağırlığı yaklaşık. 20.000 kilo Yaklaşık olarak gereken alan. 13x3,5m Taşlama tekerleği başlığı Taşlama mili tahriki 20 kW Hidrostatik taşlama mili yatağı Taşlama taşı, maks. 750x100x305 mm Taşlama taşı çevresel hızı, max. 1 – 34 m/sn. (Ø 750 mm diskler için) Çalışma kafası Hız aralığı, sürekli ayarlanabilir 10 -180 dak-1 Montaj konisi MK 6 Dönme aralığı +/- 45 derece çalışma masası Hidrolik masa tahriki – sürekli ayarlanabilir 0,05 – 4,0 m/dak Döner aralıklı çalışma masası +/- 4 derece kuyruk mili Hidrolik olarak çalıştırılan tüy vuruşu Tüy vuruşu 90 mm Merkezleme merkez tutucu MK 6 Kuyruk mili üzerine yerleştirilmiş giydirme cihazı Soğutma suyu temizleme sistemi Basınç pompası ve kağıt bant filtreli soğutma tankı Tank kapasitesi 450 litre 📍 Teslimat: Konumdan ücretsiz yüklenen kamyon 📅 Ağustos 2025'ten itibaren mevcut ⚙ Garanti: Yok, kullanılmış makine olarak Üretiminizde kullanacağınız kaliteli silindirik taşlama makinesini satın almak için bu fırsattan yararlanın. Büyük ve ağır iş parçaları için mükemmel – en üst düzeyde hassas taşlama için bu makineyi hemen güvenceye alın!

Koşul: mükemmel (kullanılmış), Üretim yılı: 2013, hacim debisi: 2 m³/saat, basınç (min.): 8 bar, Vida tipi kompresör MARK MSA 15 Motor gücü: 15 kW Bljdpfx Alsy Uwi Eeish Kapasite: 2,00 m3/dak Basınç: 8 bar Üretim yılı: 2013 Net fiyat: 8.500,- Brüt fiyat: 10.455,- Kompresör tamamen çalışır durumda

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 1981, Fonksiyonellik: tamamen fonksiyonel, taşlama uzunluğu: 2.500 mm, taşlama taşı çapı: 600 mm, taşlama çapı: 450 mm, merkezler arası iş parçası uzunluğu: 2.500 mm, taşlama taşı genişliği: 80 mm, No reserve price – guaranteed sale to the highest bidder! The machine was overhauled in 2025. The following work was carried out: - Inspection of the lubrication and hydraulic systems - Geometric alignment of all axes by grinding the table and scraping the guideways - Replacement of bearings - Inspection of the workpiece headstock - Inspection of the grinding wheel headstock - Inspection of the electrical system (conversion from fuse links to modern circuit breakers) - Installation of a central emergency stop button in the operating console - Installation of work area lighting - Thorough cleaning of the machine - Replacement of way covers - Installation of a digital axis display for the X-axis - Overhaul of the cooling system - Honing and replacement of cylinder seals - Repair of the valve block TECHNICAL DETAILS Grinding length: 2,500 mm Grinding wheel diameter: 600 mm Maximum grinding diameter: 450 mm Centre distance: 2,500 mm Workpiece diameter between centres: 450 mm Workpiece length between centres: 2,500 mm Blodpsy Sx Iqsfx Alioh Grinding wheel width: 80 mm Y-axis feed travel: 450 mm Z-axis feed travel: 2,700 mm Mounting diameter: 305 mm EQUIPMENT - Wheel balancing device - 2 travelling steady rests - Dressing device - Complete DTR documentation - 2 grinding wheels: T1 600x80x305 A98 46K 9V/40 34527331