Kullanılmış Faymonville Multimax Plus Satteltieflader Hebebett satın al (5.687)

Durum: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the specification list. Full equipment details available upon request. GOOSENECK: * Gooseneck in SNT design for optimized loading deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6° * For tractors: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX * Grating flooring with 5 mm steel reinforcement on gooseneck and rear chamfer * 2-inch king pin * Guide plate on the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Round NATO socket at the front terminal strip (Maeler & Kaege VG 96 917) * On the gooseneck, one pair of removable side alu drop sides, approx. 400 mm high, anodized finish * One LED work light each mounted left and right at the top of the front wall, operated by on/off switch (operation from tractor unit not possible in this configuration) LOADING PLATFORM: * Loading platform, approx. 9,600 mm long, rear chamfer approx. 900 mm x 6° * Loading platform after gooseneck hydraulically liftable/lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg * Continuous grating flooring with approx. 5 mm steel underlay on lift bed and loading platform for additional reinforcement, designed for point loads TYRES: 235/75 R 17.5 3PMSF twin wheel configuration. Brand at our discretion * TPMS tyre pressure monitoring system in accordance with ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle self-steering Bwodpfjy Auhhex Adtep * 3rd axle with electromagnetically operated reverse lock, activated via reverse gear and manually * 1st axle with traction help * Technical axle load: 12,000 kg each * Air suspension with lift-lower valve HYDRAULIC LOADING RAMPS: * 1 pair two-piece AXS steel ramps with grating surface, approx. 4,920 mm long, approx. 900 mm wide * Hydraulically folding ramp tips * Ramps hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward independently * Flashing lights on outer side of ramp tips, switch located next to ramp controls * Transport lock for ramps using quick-lock mechanism * On-outline sand coating finish on ramp outer frame and ramp tips * Mechanical drop-leg supports on the sides of the ramps for aligning with unloading docks * Control valves for hydraulic ramps located on the right side of the vehicle BRAKING SYSTEM: WABCO EBS-E braking system, meets current EU requirements SURFACE PROTECTION: * HRM-metallization of full vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimum corrosion protection PAINTWORK: * Trailer in carmine red (RAL 3002) * Rims in silver grey * Side panels: natural aluminum * Wheel hubs per axle manufacturer * Lamp panel in pure white (RAL 9010) EQUIPMENT: * Front wall made of steel, removable, approx. 1,600 mm high, incl. connector plate for supply lines to tractor mounted approx. 1,000 mm from the lower edge of the outer frame * Lash chain securing points at inside front wall (left and right), with aluminum troughs below left and right for chain or ratchet strap storage * Behind front wall: approx. 12 mm thick DELIGNIT board bolted on * Two additional pairs of bolted lashing rings (LC 5,000 daN) * Electric cable winch, pulling force approx. 5,400 kg, with radio remote control. Steel cable approx. 24 m long, cable diameter approx. 9.5 mm, incl. cable feed guide.

Durum: yeni, azami yük ağırlığı: 36.400 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment list available upon request. Gooseneck in SNT design to optimize loading deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic operations, excluding hydraulic winches. Without installation of supply connections on the tractor unit * Outer beams of the gooseneck with mounting holes for boltable lashing rings. The first hole approx. 200 mm from the front, then every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * One mounting hole in the upper rear area of the gooseneck's outer beams for a bolt-on lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * 3 pairs of recessed lashing rings inside on the gooseneck's outer beam (LC 5,000 daN) * 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) * 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) * On the gooseneck and rear chamfer, grating surface with 5 mm steel reinforcement * 2-inch king pin * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m in length) between trailer and tractor unit with NATO-NATO plugs * On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish LOADING AREA: * Loading area, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6° * Loading area behind gooseneck hydraulically height-adjustable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg Bodpfx Asyhkqujdtowp * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle steered. 3rd axle with electromagnetically controlled reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion, load index 143/141J (144/144F) * Mechanical landing legs with 2-speed gearbox and crank * Continuous grating surface with approx. 5 mm steel reinforcement underlay, designed for point loads: – on the lift bed – on the loading area * Painted sand coating on the deck plates of the gooseneck and in the transition areas between neck and lifting bed, between lifting bed and loading area, and between loading area and ramps * 1 spare wheel mounting bracket under loading area on right side in front of axles * Cut-outs in the outer frame of the loading area and lifting bed for securing straps (LC 2,000 daN) * 11 pairs of recessed lashing rings flush in the outer frame of the loading area, foldable outwards (LC 10,000 daN): – 3 pairs in the outer frame of the lifting bed – 8 pairs in the outer frame of the loading area * 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): – 3 pairs in the lifting bed – 8 pairs in the rear part of the loading area * Control valves for hydraulic ramps located on the right side of the vehicle * 1 pair of foldable mechanical rear supports with single-handed operation HYDRAULIC LOADING RAMPS: * 1 pair of two-part AXS steel ramps with a length of approx. 4,920 mm and a

Durum: mükemmel (kullanılmış), Üretim yılı: 2026, Yük kapasitesi: 38.370 kg Maksimum toplam ağırlık: 49.500 kg Boş ağırlık: +/- 11.130 kg Teknik durumu: çok iyi Görsel durumu: çok iyi Bsdpfxezdizio Adtewp Daha fazla bilgi için Christian Theißen ile iletişime geçiniz. Üretici: Faymonville Model: Multimax Plus Üretim yılı: 2026 Ürün durumu: Yeni Teknik Bilgiler: Boyun uzunluk x genişlik: 3,70 x 2,48 m Yükleme alanı uzunluk x genişlik: 9,60 x 2,54 m Eksensayısı: 3 Kullanılabilir Yük: 38.370 kg Boş Ağırlık: +/- 11.130 kg Azami Toplam Ağırlık: 49.500 kg Donanım: BPW akslar ve süspansiyon, 1. ve 2. aks sabit, 3. aks yönlendirme uzaktan kumandalı. 3. aks geri viteste ve manuel olarak devreye alınabilen elektromanyetik geri sürüş kilidi ile donatılmıştır. Teknik aks yükü: 12.000 kg. Boyun ve kaldırma yatağı ile kaldırma yatağı ve yükleme alanı arasındaki geçişlerde ve rampa ile yükleme alanı arasındaki geçiş bölgelerinde boyalı kum kaplama. Sağda, eksenlerin önünde yükleme alanının altında bir yedek lastik, montaj adaptörüyle birlikte. Yükleme alanı ve kaldırma yatağı dış çerçevesinde germe kayışları (LC 2.000 daN) için yuvalar. Özel Donanım: Elektrikli vinç, yaklaşık 5.400 kg çekme gücü, uzaktan kumandalı. Yaklaşık 24 m çelik halat, halat çapı yaklaşık 9,5 mm, baskı makarası dahil. Vinç montajı, boyunun iç tarafında önde. Elektrikli vinç için 1 adet düz INOX koruma kutusu, yaklaşık ölçüler: 825 x 340 x 390 mm (U x G x Y), üstte kapaklı ve vinç kablosu için yer ile birlikte. Sol ve sağda, eksenlerin önünde yükleme alanının altında, arkaya eğimli şekilde monte edilmiş yaklaşık 620 x 300/180 x 950 mm (U x Y x D) boyutlarında 1 INOX alet kutusu. WABCO Smart Board Sistemi. Aks yük bilgileri, araç nominal sürüş yüksekliğinde ise geçerlidir, aksi halde farklılıklar olabilir. Smart Board kilometre sayacı ile donatılmıştır. 1. aks başlatma desteğine sahip. Havalı körüklerin yükünü azaltma: 30 km/s'ye kadar ve yasal aks yükünün %130'una kadar kalan eksenler üzerinde. Kullanım, çekici ünitesinin fren pedalı üzerinden sağlanır. Rampaların köprüleme parçaları için eksenlerin önünde bir raf bulunmaktadır. Bilgi: Temsilî görsellerdir. Not: Konum: Essen, hemen teslim.

Durum: ikinci el, azami yük ağırlığı: 51.870 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2025, bir sonraki muayene (TÜV): 03/2026, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment – full specification available on request. GOOSENECK Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, rear end tapered approx. 1,000 mm x 10° * For tractor units: 4x2, 6x2, and 6x4 * Detachable steel front wall, approx. 400 mm high * At the front connector strip, yellow-red air couplings * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets Bedextc Uhopfx Adtjwp * 3 kW electro-hydraulic unit for hydraulic operations control * Outer beams of the gooseneck with mounting holes for bolted lashing rings * One mounting hole at the upper rear area of the gooseneck outer beams for a bolted lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in aluminum rear board, approx. 400 mm high, anodized finish * On the gooseneck, approx. 40 mm thick hardwood flooring * 2-inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Rear section of the gooseneck prepared for aluminum loading ramps * Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. 8,800 mm long, rear end tapered approx. 500 mm x 10° * Recess in the platform and in the tapered area for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension * 1st and 2nd axle rigid; 3rd and 4th axles steering trailing axles * 3rd and 4th axles with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear, 2-speed gearbox with crank handle, JOST Modul B – static test load approx. 50,000 kg * Continuous hardwood flooring approx. 50 mm thick on platform, interrupted between axles (increases coefficient of friction) * Platform locking with conically welded locking profiles at approx. every 250 mm * Long holes at the front of the platform for attachable and repositionable bridging elements * Intermediate table with stepped platform, approx. 300 mm wide, for the extension tube with large cross-section, sheet metal cover – front and rear long holes for attachable and repositionable bridging elements – detachable cover level with platform * 1 pair of lashing rings on the front cross beam (LC 10,000 daN) * 6 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN) * Additionally, 1 pair of lashing rings outside on the front cross member of the platform, rotated approx. 90° inwards towards the platform (LC 10,000 daN) * Extensions (galvanized) extendable by approx. 230 mm per side * 1 pair of fixed, open wheel recesses up to the extension, approx. 700 x 410 mm (W x D), on the platform in front of the 1st axle, wheel recesses with sheet metal cover and square climbing strips approx. 15 x 15 mm every approx. 200 mm * Between the 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D). Covers for the wheel recesses split lengthwise, with wooden inlay, outer sections with insert position (cut-off text).

Durum: yeni, azami yük ağırlığı: 36.410 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire stock of vehicles, including those available for immediate or short-term delivery, on our website. Partial list of features. Full specification available on request. NECK: * SNT-design gooseneck for optimized loading platform length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front bulkhead, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches) * Approx. 40 mm hardwood decking above gooseneck * 2-inch kingpin * Gooseneck guide plate for fifth wheel, approx. 500 mm wide * Rear of gooseneck equipped for ALU approach ramps * Round NATO socket on front connection strip (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders ahead of the front bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inside the chassis beam) Bwodey Auh Iopfx Adtep EQUIPMENT: * Loading platform approx. 8,800 mm long, extendable version approx. 4,100 mm, rear with taper approx. 500 mm x 10° * Recess in the loading area and into the taper for excavator dipper stick accommodation, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are routed protected inside the extendable beams and automatically adjust to the platform length * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle steered trailing * 3rd axle with electro-magnetic reverse lock, can be activated by reverse gear and manually * Technical axle load: 12,000 kg per axle, air suspension with lift and lowering valve * 235/75 R 17.5 3PMSF twin tires. Brand of our choice * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load approx. 50,000 kg * Hardwood floor (approx. 50 mm thick) throughout the load area and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the large cross-section extension tube. Intermediate table with recessed platform and extendable mountings for aluminium bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses ahead of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm, with widenings at the bottom (if vehicle equipped with extendable outriggers) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load area between the 1st and 2nd axle * Wheel recesses with square climbing strips approx. 15 x 15 mm and bottom widenings * Aluminium covers for wheel recesses ahead of the axles and between the 1st and 2nd axle, which can also serve as extension planks (if vehicle equipped with extendable outriggers) * Lockable aluminium elements fitted onto the extension pipes of the outriggers * 1 pair of mechanical rear supports * 1st axle with traction aid * Painted sand...

Durum: yeni, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Additional vehicles available – extract from equipment list. Full equipment details upon request. GOOSENECK: * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10° Bedpfxsxarmas Adtowp * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front wall, detachable, approx. 400 mm high * ASPÖCK-UNIBOX on the front control panel with 24N, 24S & 15-pin sockets * 3 kW electric-hydraulic power pack for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolted lashing rings: first hole approx. 200 mm from the front, then every approx. 400 mm; 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear of the gooseneck (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring over the gooseneck, over king pin checker plate covering * 3.5 inch king pin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO plug socket on the front control panel (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retaining spring suspended on the outer beams of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, approx. 8,800 mm long with rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the platform length * BPW axles and suspension, 1st axle with steering, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tyres – brand at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg * On the platform, continuous and between axles interrupted approx. 50 mm thick hardwood flooring (thereby increasing the coefficient of friction). – Slotted holes for hook-in and repositionable bridging elements * At front of platform – 1 adjustable intermediate table, approx. 300 mm wide, for the extension tube with large cross-section, with checker plate covering. – Front and rear with slotted holes for hook-in and repositionable bridging elements * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 7 pairs of recessed, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * Extensions (galvanized) extendable by approx. 230 mm on each side (without wooden planks) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation in tractor unit * TPMS tire pressure monitoring sensors installed in all wheels * Platform locking with conically welded locking profiles every 500 mm * Locking control left and right on the trailer * For the intermediate table, approx. 300 mm wide, a mechanical lock to secure the table to the extension * 5 pairs of threaded blocks on the extendable beam for mounting bolt-on rings M20 (LC 5,000 daN) BRAKE SYSTEM

Durum: yeni, azami yük ağırlığı: 67.200 kg, toplam ağırlık: 85.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website. Extract from the specification. Full equipment details available on request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10° * For tractor units: 6 x 2, 6 x 4, and 8 x 4 short * Detachable steel front bulkhead, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flush-mount lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish * 1 plug-in ALU tailboard, approx. 400 mm high, anodized finish * Approx. 40 mm strong hardwood flooring above the gooseneck, checker plate flooring above the kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, incl. overhead gallows for securing supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed in the gooseneck for plug-in stakes approx. 100 x 50 mm LOADING PLATFORM * Extendable loading platform, length approx. 11,000 mm, rear bevel approx. 500 mm x 10° * Pneumatic locking system with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the respective platform length * BPW axles and suspension, 1st axle self-steering, 2nd axle rigid, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve * Tyres: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous hardwood flooring, approx. 50 mm thick, on the loading platform and interrupted between the axles (providing increased friction coefficient) * Slotted holes for suspended and repositionable bridging elements: - on the fixed section behind the gooseneck - at the front of the platform * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate covering, slotted holes front and rear for suspended and repositionable bridging elements * 1 pair of flush-mounted lashing rings, lying, in the fixed front section of the loading platform (LC 10,000 daN) Bwodsrgzv Nepfx Adtjp * 9 pairs of flush fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle alignment monitoring, without installation in the tractor * 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535 * Below the gooseneck and at the rear cross member, left and right, a 7-pin socket each with bracket for warning signs * Painted-on sand coating on the outer frame of the platform, the checker plates, and the transition area between the loading platform and...

Durum: yeni, azami yük ağırlığı: 50.400 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our complete range of vehicles with immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK * Gooseneck in SNT design to optimize the loading platform length, approx. 3,700 mm long, rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK UNIBOX at the front connection rail with sockets * 3 kW electric-hydraulic power unit for controlling hydraulic functions (except hydraulic winches) * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized * One removable aluminum rear board, approx. 400 mm high, anodized Bwsdpfxstx Nwno Adtep * Approx. 40 mm solid hardwood floor above the gooseneck, over the kingpin with checker plate covering * 2" kingpin * Socket at the rear of the gooseneck for aluminum loading ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOADING AREA * Extendable loading area design, approx. 8,800 mm long, with rear taper approx. 500 mm x 10° * A recess in the loading platform and into the taper for accepting the excavator bucket arm, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st axle steering, all other axles hydro-mechanically forced-steered * 1st axle with electric-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF, twin mounting * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B – static test load: approx. 50,000 kg * Continuous hardwood flooring approx. 50 mm thick on the loading area and interrupted between axles (increases friction coefficient) * 1 intermediate platform, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanised widenings, approx. 230 mm per side (without wooden planks) * Wheel recesses with 15 x 15 mm square climbing bars in front of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts * Aluminum elements lockable on the extension tubes of the widenings * Widenable U-profiles for inserting the aluminum covers: - on the fixed section behind the gooseneck - on the intermediate platform - on the extendable loading area * Wheel recesses with 15 x 15 mm square climbing bars between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts * Aluminum elements lockable on the extension tubes of the widenings * 1 pair of mechanical rear supports * Remote steering from both the front and rear via cable remote control, with axle single-track control, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm long, approx. 900 mm wide * Hydraulically foldable ramp tips * Ramps can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber flooring approx. 25 mm and steel deck approx. 5 mm as additional

Durum: ikinci el, Üretim yılı: 2014, Daha fazla bilgi için Theo Lelie ile iletişime geçin. Bsdpfx Adoxtqkwetswp

Durum: ikinci el, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2017, * SAF akslar * Tekerlek yuvaları * Genişliği ayarlanabilir hidrolik yükleme rampaları * Havalı süspansiyon * Genişletilebilir * Boş ağırlık: 11.020 kg ----Dahili Araç Numarası: 11010----Hatalar ve ara satışlar saklıdır. Bsdpjwta Alofx Adtswp WhatsApp desteği mevcut! Araç hakkında sorunuz varsa veya ek bilgi için bize rahatça WhatsApp üzerinden yazabilirsiniz WhatsApp Almanca, İngilizce -- WhatsApp Almanca, İngilizce, Arapça

Durum: ikinci el, azami yük ağırlığı: 50.400 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2021, toplam genişlik: 3.000 mm, toplam yükseklik: 3.760 mm, Donanım: ABS, * Own hydraulic unit * Hydraulically movable loading ramps * 4 hydraulic auxiliary supports * Hydraulically extendable low-bed (3000 mm) * Extendable loading platform (500 mm) * AXION radio system with remote control * Gooseneck with side walls & storage box * Hydraulically steered axles ----* Wabco Trailer EBS-E * SAF axles with drum brakes * Wabco SmartBoard unit * Height-adjustable low-bed * Reversing camera Bsdozbw N Ropfx Adtjwp * Telematics ----The following work was carried out by ES-GE Nutzfahrzeuge in February: * Brake drums, brake shoes & linings, brake cams, bushings & slack adjusters renewed on all 4 axles * Tie rod ends replaced * Suspension of the steering knuckles on TwinAxle II replaced * Electrical lighting system serviced * Hydraulic accumulator replaced * EBS repaired * Electric pump checked * High-pressure oil and filter replaced * Checked axle play * Central lubrication system checked * Suspension levers serviced * Sensors for height adjustment serviced * Distribution box at the front serviced * Wooden floor repaired * Protective covers repaired * Air reservoir newly fastened * Wheel bearings checked ----* Tire size: 245/70R17.5 * Gross vehicle weight: 73,000 kg * Unladen weight: 14,600 kg * Total length: 13,200 - 16,200 mm * Total width: 2,540 - 3,000 mm * Mileage: 194,000 km * Next SP inspection due: 09.2026 ----Vehicle number: 12154----Subject to errors and prior sale----Advertising and various lettering digitally removed.----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of the rest. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle TÜV/SP inspection Complete export processing Financing arrangements Application for export license plates Vehicle transfer Vehicle registration Recovery and vehicle transport---- YOUR VTS TEAM

Durum: yeni, azami yük ağırlığı: 38.953 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Gross vehicle weight: 49,500 kg Fifth wheel load: 18,000 kg Axle load: 31,500 kg Unladen weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck length: 3,850 mm Fifth wheel height loaded: 1,200 mm Loading platform length: 9,300 mm Extendable by: 0 mm Axle spacing: 1,360 mm Steering angle radius (rear): 2,300 mm Loading height at max. load: 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical Description Gooseneck: Gooseneck with chamfered front corners at 45° and rear taper of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, 30 mm thick. Loading platform: Bwodpfjg Sk Trjx Adtjp Loading platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear slope of approx. 1,000 mm x 8°. 6 pairs of folding lashing rings facing outward (LC 5,000 daN). 2 pairs of folding lashing rings facing outward (LC 10,000 daN). 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN). Cut-outs in the outer frame of the loading platform for attaching tensioning straps. (LC 2,000 daN). Hardwood flooring approx. 48 mm thick, above the axles fitted with chequer-plate covering. Ramps: Two-piece steel ramps: One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically foldable ramp sections, hydraulic lifting device and can be hydraulically adjusted laterally. Maximum load per pair: 40,000 kg Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: 235/75 R 17.5 tyres as per manufacturer's selection. Axles: SAF axles, air-suspended, with drum brakes, featuring lift/lower function. Last axle is force-steered with electro-magnetic reverse lock, activatable via reverse gear or manually. Axle tools. Brake System: Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit. Steel Construction: Steel construction made from high-strength fine-grained steel. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: Premium and durable corrosion protection via sandblasted welded frame, primed with 2-component (2K) zinc dust primer. High-quality single-tone 2-component (2K) top coat in RAL colours of your choice. Rear metalized and painted in RAL 9010 (pure white). Metallic paint not possible. Electrical System: Electrical system compliant with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets. ISO-compliant connections. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories Included 2" king pin One galvanized steel front bulkhead approx. 400 mm high. At the galvanized front connection strip yellow/red airline couplings. 4 wheel chocks with holder on the front bulkhead (± 5kg). Cable for supplying electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long, max. 250A) between semi-trailer and tractor unit, with plug connection (ANDERSON-ANDERSON). Galvanized folding supports under the rear slope of the loading platform. Bracket for a rotary beacon at the rear of the trailer. Control valves for the ramps installed on right-hand side of trailer (± 4kg). Yellow reflective tape according to EU regulations on the sides and rear of the trailer. Electro-hydraulic unit mounted at the rear under the loading

Durum: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full specifications available on request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Loading Platform: * Platform behind the gooseneck hydraulically liftable and lowerable, approx. 2,800 mm long, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of fold-in lashing rings on the central beam at the front (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding and unfolding ramp sections. Hydraulic lifting, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Gear: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Brake System: * WABCO braking system in accordance with EU regulations, with EBS-E (2S2M) Tires: * Tires 235/75 R 17.5 3PMSF – brand at our discretion TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) ensuring optimal corrosion protection * Final paint with 2 layers of 2K top coat, single color in RAL 3002 carmine red, in accordance with RAL System 841GL * Wheels in silver-gray Accessories included: * 2-inch kingpin * Galvanized steel front wall approx. 400 mm high * Grating surface in the gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating surface in the loading platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Painted sand layer as anti-slip on the checker plates above the kingpin and platform * Electro-hydraulic unit at rear beneath the loading platform * On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H). The rear galvanized stakes are removable. (Body length approx. 2,560 mm) * Electric cable winch with radio remote control, lifting force approx. 5,400 kg, incl. approx. 9.5 mm thick wire cable, approx. 24 m long, with cable guiding roller * Bolted approx. 5 t ring for redirecting the winch cable on the gooseneck without guide pulley * One galvanized toolbox integrated in the chamfered gooseneck with an opening for a cable winch * Grating surface on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) Bedoyhkqzopfx Adtewp * 7 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading platform * Lift axle on the front axle, controlled via TEBS E based on current axle load and loading status * 7 pairs inst...

Durum: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment details. Complete specification available upon request. Bjdpfxsyhkrrs Adtswp Gooseneck: * Gooseneck with front corners chamfered approx. 45°, with rear bevel approx. 750 mm x 10° * 3 pairs lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading platform: * Loading area aft of the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs outward-folding lashing rings (LC 5,000 daN) * 2 pairs outward-folding lashing rings (LC 10,000 daN) * 1 pair inward-folding lashing rings at the central beam front (LC 10,000 daN) * Cutouts in the external frame of the loading area for securing strap hooks (LC 2,000 daN) * Grating floor covering C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), checker plate floor covering above the axles Two-piece steel ramps: * One pair galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections * Hydraulic lifting unit, hydraulically adjustable * Maximum load capacity per pair: approx. 40,000 kg Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steered axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * Tire Pressure Monitoring System (TPMS) according to ECE R 141 Paintwork: * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with two layers of 2K top coat, single color in RAL 3002 Carmine Red in accordance with RAL System 841GL * Wheels in silver grey Accessories included: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating floor covering in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating floor covering in the loading platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electro-hydraulic unit at the rear beneath the loading area * On the gooseneck – plug-in aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stake pockets are removable (body length approx. 2,560 mm) * One electric cable winch with remote control, approx. 5,400 kg pulling force, incl. wire rope approx. 9.5 mm thick, approx. 24 m long, with guide roller * Bolted approx. 5t ring for winch cable insertion on the gooseneck without deflection roller * One galvanized toolbox, integrated in the gooseneck bevel with an opening for a winch * Grating floor covering on the gooseneck C30/3 (point load approx. 2t over an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the external frame of the loading area * Lift axle on the front axle, controlled via TEBS E in accordance with current axle load and loading condition * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs at the r

Durum: yeni, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, 3-axle MULTIMAX PLUS low-loader semi-trailer, air-suspended and hydraulically forced-steered axles. Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h legal Gross weight: 49,500 kg or 31,500 kg Fifth wheel load: 18,000 kg Axle load: 31,500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Bwjdpfxjizu Nto Adtsp Kingpin turning radius to rear approx.: 2,100 mm Coupling height when loaded approx.: 1,205 mm Loading area length approx.: 9,600 mm Extendable by approx.: (value not specified) Loading area width approx.: 2,540 mm Loading height at max load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle distance: 1,360 mm Gross weight dependent on fifth wheel load: Yes Special permit required if country-specific legal limits are exceeded. Technical Description Gooseneck: SNT design gooseneck to optimize loading platform length, approx. 3,900 mm length, with rear chamfer approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor units: 4x2 and 6x2. Loading area: Loading platform approx. 9,600 mm length with rear chamfer approx. 900 mm x 6°. Section after the gooseneck is hydraulically raisable/lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS Pair of two-section AXS steel ramps, approx. 4,920 mm long and 900 mm wide. Open grating surface. Hydraulically folding ramp tips. Each ramp hydraulically shiftable approx. 235 mm outward and approx. 365 mm inward. Maximum load and ramp angle as per technical datasheet: C470319. Maximum gradient at lowered loading area: 9° Axles and Suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg. Air suspension with lift/lower valve. Axle tools included. Tyres: 235/75 R 17.5 3PMSF twin tyres. Brand at our discretion. Load index 143/141J (144/144F). Braking system: WABCO EBS-E braking system per EU regulations. No cables to the tractor unit. Lighting system: 24V "ASPÖCK-NORDIK full LED" lighting per EU regulations (ASS 3). Metallisation: Complete HRM (High Resistance Metallisation). Full steel structure shot-blasted, then hot-coated with ZINACOR 850 (85% zinc / 15% aluminium). Painting – 6-stage finish: - Complete steel structure shot-blasted after welding - 1 coat zinc-based primer, 1 coat adhesion primer - Top coat with 2 coats 2K acrylic paint, single colour in RAL shade of choice - Cavity sealing with special wax - Rims in silver - Multicolour & special paint available at extra cost Steel structure: High-tensile fine-grain steels Types: S355J2+N/S355MC (yield stress 355 MPa), S690QL/S700MC (yield stress 690 MPa) Welders certified to DIN-EN 287-1, MAG welding per EN ISO 4063, M21 shielding gas as per EN ISO 14175. Front wall: Removable steel front wall, approx. 400 mm high. Supply connection strip for connections to tractor unit, fitted at outer frame profile height. ASPÖCK-UNIBOX at the front supply strip with 24N, 24S & 15-pin sockets. - 24N connection per ISO-1185 - 24S connection per ISO-3731 - 15-pin connection per ISO-12098 If your pin assignment deviates from the ISO standard, please inform us. "Anderson" socket on front supply strip: Rema 78051-00 & Amp. 150 V. Cable for the supply of the electro-hydraulic power pack and/or electric winch (35 mm²,

Durum: iyi (kullanılmış), Profesyonel Dräger Oxylog 3000 Plus transport ventilatörü / respiratörü satıyorum – cihaz, acil tıp hizmetlerinde, ambulanslarda ve sağlık kuruluşlarında kullanılmaktadır. Durumu: Cihaz açılıyor ve çalışıyor. Ekran net, tuşlar ve düğmeler düzgün çalışıyor. Görsel olarak normal kullanım izleri mevcut. Gövdesinde yerel kozmetik hasarlar var ancak cihazın işlevselliğini veya çalışmasını etkilemiyor. Özellikler: Yetişkin ve çocuklar için transport ventilasyonu. Oxylog 3000 Plus modeliyle uyumlu ventilasyon modları. Solunum parametrelerinin ayarlanması. Uyarı sistemli okunaklı ekran. Donanım: Dräger Oxylog 3000 Plus respiratör, taşıma çantası, fotoğraflarda görünen kablo ve bağlantılar. Ek bilgiler: Kullanılmış tıbbi ekipman. Satış, fotoğraflarda görülen mevcut durumla sınırlıdır. Ambulans, hastane ya da teknik birim için ideal yedek transport respiratörü. Bedpfxox Tuyxo Adtowp

Durum: mükemmel (kullanılmış), For sale: Dräger Oxylog 2000 Plus transport ventilator – a professional device for mechanical ventilation used in ambulances, medical transport, emergency departments (ED), intensive care units (ICU), and by rescue services. Bwodsx N Icxjpfx Adtop The device powers up and operates correctly, the display is clear with visible menu and parameters. Visual condition is good, with normal signs of use consistent with age (see photos). The equipment originates from the German market. Specifications & equipment: • Model: Oxylog 2000 Plus • Manufacturer: Dräger • Year of manufacture: 2015 • Version: Transport • Module: LDS RD 228 • Gas supply (O₂ / air) • Complete with transport bags • Includes hoses and mounting bracket • CE marked, Made in Germany Features: • Adult and pediatric ventilation • Ventilation modes used in emergency medicine • Adjustable settings: Vt, frequency, FiO₂, PEEP, etc. • Clear display of operating parameters • Safety alarms Technical condition: • Used device • Fully functional – powers on and responds to settings • No current calibration certificate (to be arranged by the buyer if required) Legal notice: Medical equipment – intended for use by qualified personnel only. Ideal for private ambulances, medical transport companies, training purposes, armed forces, offshore use, or as backup equipment.

Durum: ikinci el, boş ağırlık: 11.800 kg, azami yük ağırlığı: 36.200 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2022, toplam uzunluk: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R17,5, Donanım: ABS, Faymonville Telemax F-S43 low loader | 3 axles steered via remote control | Heavy-duty lashing points | SAF axles | extendable | stake pockets | Tyres: 245/70 R17.5 | Gross weight: 48,000 kg, payload: 36,200 kg | Dimensions: 13,500 mm + 7,900 mm + 8,100 mm | Errors, input mistakes and prior sale reserved. Bjdewm I Ipspfx Adtjwp

Durum: iyi (kullanılmış), Cyklos RPM 350 Plus Otomatik Döner Perforaj Makinesi Makine çok iyi durumda, üretime hazır. Açıklama: 350 mm çalışma genişliğine sahip otomatik perforaj cihazı. Sürtünmeli kâğıt beslemesi. Her bir kâğıtta 1-5 arasında perforaj hattı üretebilir. Besleyici ve çıkış tepsisi A3 ve daha küçük formatlara uygun. Kullanımı kolay. Kıvrım diski ile yükseltme seçeneği mevcut. Kâğıt sayacı. Dakikada 70-130 arası ayarlanabilir besleme hızı. Bwodpfxsy Sd Upo Adtsp 230V enerji beslemesi. Ağırlık: 20 kg. Çekya üretimi.

Durum: mükemmel (kullanılmış), Catalog number 7316 TECHNICAL DATA - track width: 350 mm - working width of the shaft with saw blades: 355 mm - max. saw blade diameter: 450 mm - max. cutting height: 170 mm - saw blade bore diameter: 70 mm Bsdpszab A Sjfx Adtswp - table dimensions: 1850 x 790 mm from above: - detents - 2 smooth metal feed rollers - shaft with saw blades - 3 smooth metal feed rollers from below: - guide rail - detents - track - metal toothed feed roller - central electric lubrication - stepless feed speed adjustment - electric lifting/lowering of machine body, approx. 1 kW - feed motor: 2.2 kW - main motor: 75 kW - overall dimensions (L/W/H): 2600 x 1800 x 1700 mm - weight: 2700 kg – Used multi-blade saw – Condition: very good Net price: 68,900 PLN Net price: 16,400 EUR (depending on rate of 4.2 EUR) (Prices may change due to greater fluctuations)

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2019, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 245/70R17.5, renk: gri, Üretim yılı: 2019, Faymonville F-S43-1AAF 660 cm Uzatılabilir Hidrolik rampalar Vinç Zorunlu yönlendirmeli = Ek Bilgiler = Lastik ölçüsü: 245/70R17.5 Süspansiyon: Havalı süspansiyon Ön aks: Çift teker; Yönlendirmeli; Sol iç lastik diş derinliği: %50; Sol dış lastik diş derinliği: %50; Sağ iç lastik diş derinliği: %50; Sağ dış lastik diş derinliği: %50 Orta aks: Çift teker; Yönlendirmeli; Sol iç lastik diş derinliği: %50; Sol dış lastik diş derinliği: %50; Sağ iç lastik diş derinliği: %50; Sağ dış lastik diş derinliği: %50 Arka aks: Çift teker; Yönlendirmeli; Sol iç lastik diş derinliği: %50; Sol dış lastik diş derinliği: %50; Sağ iç lastik diş derinliği: %50; Sağ dış lastik diş derinliği: %50 Boş ağırlık: 13.500 kg Taşıma kapasitesi: 47.500 kg Azami toplam ağırlık: 61.000 kg Model numarası: F-S43-1AAF / UZATILABİLİR / HİDROLİK Bsdezinblspfx Adtowp = Firma Bilgileri = TÜM FİYATLAR İHRACAT İÇİN NETTİR. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Rusça konuşuyoruz. Bilgileri mümkün olduğunca doğru sağlamak için çaba gösteriyoruz fakat yayınlanan metinlerden herhangi bir hak iddia edilemez.

Durum: yeni, azami yük ağırlığı: 45.115 kg, toplam ağırlık: 53.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, Diğer araçlar için lütfen iletişime geçiniz. Donanımın tamamı talep üzerine verilir. Yükleme alanı: - Yaklaşık 30 mm kalınlığında sert ağaç döşemeli yükleme alanı - Dışa doğru katlanabilir 8 çift yük sabitleme halkası (LC 10.000 daN) Yarı römork ayakları: - JOST marka mekanik yarı römork ayakları, iki kademeli şanzıman ile yaklaşık 24 ton kaldırma kapasitesi (yaklaşık 50 ton test kapasitesi) Bwodpfx Adjzhd Nijtop Lastikler: - 385/65 R 22.5 - TPMS lastik basıncı izleme sistemi, ECE R 141’e uygun. Motor aracı ile veri iletişimi ISO 11992’ye göre standartlaştırılmış EBS arayüzü üzerinden yapılır. Doğru gösterim için motorlu araç bu verileri aktarabilmeli ve gösterebilmelidir. Akslar ve süspansiyon: - BPW akslar, teknik olarak her biri 10.000 kg - 1. ve 3. aks hidromekanik zorunlu yönlendirmeli, döner tabla üzerinde; 2. aks sabit - Havalı süspansiyon, kaldırma ve indirme valfi ile - Aks takımı ekipmanı Fren sistemi: - Wabco fren sistemi, AB yönetmeliklerine uygun, EBS-E (4S3M), çekici araca bağlantı hatları olmadan Elektrik sistemi: - AB yönetmeliklerine uygun elektrik sistemi, 24 volt aydınlatma ASPÖCK-NORDIK (ASS3) - Ön bağlantı barasında ASPÖCK-UNIBOX, 24N, 24S & 15 pinli prizler ISO’ya uygun - 24N ISO-1185 - 24S ISO-3731 - 15 pin ISO-12098 Çelik konstrüksiyon: - Yüksek mukavemetli ince taneli çeliklerden üretilmiş çelik yapı - Çelik kaliteleri: S355J2+N/S355MC (akma dayanımı 355MPa), S690QL/S700MC (akma dayanımı 690MPa) Boya: - Tüm çelik yapı, kaynak işlemi sonrası otomatik türbinli makine ile kumlanır - Mükemmel kaplama yapışması için ikinci kez korund ile kumlama - Son kat boyama: iki kat 2K son kat boya, tek renk RAL 3002 Karmin Kırmızı (RAL sistemi 841GL'ye uygun) - Arka kısım metallize ve RAL 9010 (Saf Beyaz) renkte boyalı - Jantlar gümüş renkte - Tuz püskürtme testi (ISO 9227-NSS) ile boya sisteminin test edilmesi - Boşluklarda özel mum ile sızdırmazlık Aksesuarlar: - Yaklaşık 30 mm kalınlığında sert ağaç döşemeli yükleme alanı - 2” king pin - Galvanizli çelik ön panel (EN12642-XL), yaklaşık 1.200 mm yüksekliğinde - Ön bağlantı barasında sarı-kırmızı hava bağlantıları - Ön panelde yuvalarında 4 adet takoz - Merkez taşıyıcı arka kısmında yaklaşık 1.000 mm'lik yan destekler için raf - Kaz boynu ve arka sacda sağda ve solda uyarı tablaları için yuva ve prizler - Yanlarda ve römork arkasında AB yönetmeliklerine uygun sarı reflektör bantı - Yükleme alanı dış çerçevesinde yaklaşık 100 x 50 mm 10 çift yan destek yuvası - Römork arka kısmında Avrupa tipi reflektör plakaları (kırmızı-sarı) - Römork arka kısmında döner uyarı lamba yuvası - Römork arka kısmında bir çamurluk - Kullanım kılavuzu ve açıklama USB bellekte - Arka ve yanlarda 80 km/h hız etiketi - Elektro-hidrolik ünite - Takviye ile arka travers üzerine monte edilmiş 1 manevra bağlantısı - Aks yükünü belirlemek için yük manometresi, yük diyagramı dahil - BEKAMAX (Pico) merkezi yağlama sistemi, NLGI-2 normal gres ve pompa çevresinde çıkarılabilir koruma - Ön ve arka kısımdan, kablolu uzaktan kumanda ile yönlendirme; aksların tek izli kontrolü (çekiciye entegrasyon yapılmadan) - Yaklaşık 100 x 50 mm ve yaklaşık 1.000 mm yüksekliğinde 7 çift galvanizli yan destek - Yükleme alanına enlemesine monte edilmiş 4 çift yan destek rayı, yaklaşık 100 x 50 mm ölçülerinde yan destekler için - Elektro-hidrolik ünite ve/veya elektrikli vinç beslemesi için spiral kablo (yaklaşık 35 mm², yaklaşık 3,5 m uzunluğunda, max. 250A), çekici ve römork arasında NATO-NATO bağlantılı - Yükselme merdiveni

Durum: yeni, azami yük ağırlığı: 36.245 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, toplam genişlik: 2.540 mm, Donanım: ABS, Anında ve kısa sürede teslim edilebilen tüm araç stokumuzu web sitemizde bulabilirsiniz. Donanımın özetidir. Tam donanım bilgisi talep üzerine sunulmaktadır. Yükleme Alanı: * Yükleme alanı, arkada yaklaşık 1.000 mm x 8° eğimli sert ağaç zemin * 2 çift yük sabitleme halkası (LC 5.000 daN) * 1 çift yük sabitleme halkası (LC 10.000 daN) * Dışa doğru katlanabilen 6 çift yük sabitleme halkası (LC 5.000 daN) * Dışa doğru katlanabilen 2 çift yük sabitleme halkası (LC 10.000 daN) * Dış şasede, gergi kayışlarının asılması için kesitler (LC 2.000 daN) Bwjdeyvnfajpfx Adtsp Yarı Römork Destek Ayakları: * JOST mekanik destek ayakları, 2 vitesli şanzıman ile yaklaşık 24 ton kaldırma kapasitesi (yaklaşık 50 ton test yükü) Akslar: * BPW akslar, havalı süspansiyonlu, disk frenli (yaklaşık 377 mm), kaldırma/indirme fonksiyonu (ET 120) * Aks takımları Lastik Donanımı: * 435/50 R 19.5 lastikler - marka tercihi bize aittir * TPMS lastik basınç izleme sistemi ECE R 141’e uygun. Motor aracı ile veri aktarımı ISO 11992’ye göre standart EBS bağlantısı üzerinden sağlanır. Doğru gösterim için motor aracının bu verileri aktarıp gösterebilmesi gerekir. Fren Sistemi: * Wabco fren sistemi, EBS-E (2S2M), AB mevzuatına uygun, çekici araca bağlantı hatları olmadan Çelik Konstrüksiyon: * Yüksek dayanımlı ince taneli çeliklerden üretilmiş çelik konstrüksiyon. Çelik kaliteleri: S355J2+N/S355MC (akma dayanımı 355MPa), S690QL/S700MC (akma dayanımı 690MPa) Elektrik Tesisatı: * AB yönetmeliklerine uygun elektrik tesisatı, 24 Volt ASPÖCK-NORDIK (ASS3) aydınlatma * Tüm LED yan işaret lambaları sinyal ile birlikte yanar * Ön bağlantı panelinde ASPÖCK-UNIBOX, 24N, 24S & 15 pinli girişler (ISO'ya uygun). 24N ISO-1185, 24S ISO-3731, 15 pin ISO-12098 Boya İşlemi: * Tüm çelik konstrüksiyon, kaynak sonrası otomatik makinada kumlanır. En iyi yapışma için ikinci aşama korindon ile kumlama * Tüm şasiye ZINACOR 850 (%%85 Çinko/%%15 Alüminyum) ile HRM metal kaplama, maksimum korozyon koruması sağlar * Son kat boya: iki kat RAL 3002 Carmine Kırmızı (RAL sistemi 841GL'e uygun) uygulama * Arka bölüm metal kaplamalı ve RAL 9010 (Saf Beyaz) boyalı * Boya yapısı, ISO 9227-NSS tuzlu sis testine tabi tutulmuştur * Boşluklar, özel mum ile sızdırmazlık yapılmıştır Aşağıdaki ek donanımlar dahildir: * Galvanizli ön bağlantı panelinde sarı-kırmızı hava bağlantıları * 4 adet takozlu tekerlek tutucu * 2 inç king pin * Güçlü sert ağaç zeminli yükleme alanı * Yükleme alanının sağ tarafında bir stepne tutucu * Yükleme alanı eğiminde galvanizli katlanır destekler * Dış şasede, yaklaşık 100 x 50 mm ölçülerinde 9 çift dikme yuvası * Yaklaşık 1.600 mm yüksekliğinde, EN12642-XL standartında galvanizli çelik ön duvar * Merkez şasede, kaymayı önlemek için özel kum tabakası * Yükleme alanı altında, yaklaşık 1.000 x 400 x 2.500 mm ölçülerinde enlemesine yerleştirilmiş bir INOX alet kutusu * Yükleme alanında 6 çift WADER konteyner cebi (1x 20' konteyner, 2x 20' konteyner veya 1x 40' konteyner için) * Yükleme alanında, yaklaşık 100 x 50 mm'lik dikmeler için, enlemesine monte edilmiş 3 çift dikme cep paneli * İç ön duvara vidalanmış, maksimum 9 çift dikme için depo rafı * Yükleme alanının sol ve sağında, yaklaşık 600 x 350 x 600 mm ölçülerinde 2 adet INOX alet kutusu * Yükleme alanının arkasında, enlemesine alüminyum rampa tutucusu * Bir adet döner uyarı lambası (gevşek şekilde temin edilir) * Altında 2 çift feribot halkası

Durum: ikinci el, Konteyner ZETA artı filtreli Model: 12 ZPC 2 Malzeme: 316 L Bwedpfx Asb Tfw Nodtjp Max. Çalışma ağırlığı: 5 bar Sıcaklık: 90 C ° Ağırlık: 110 kg

Durum: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Extract from the equipment. Full specification available on request. - Gooseneck, length approx. 4,100 mm with central beam - Loading platform, double-extendable design, length approx. 9,400 mm - BPW axles and suspension - All axles hydro-mechanically forced steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R 17.5 3PMSF twin tyres - WABCO brand brake system, EBS-E - 3 kW electro-hydraulic power unit for hydraulic operations (without installation of supply connections on the tractor unit) - 4 pairs of stake pockets set into the external frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm - 2-inch king pin - 8 pairs of stake pockets set into the external frame of the loading platform, for plug-in stakes approx. 100 x 50 mm - 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the left in direction of travel - Rear and front axle steering controllable via cable remote control with push buttons, including axle alignment control, without installation in the tractor unit - 2 axle load gauges installed on the left side Bjdswvzg Rspfx Adtowp - Steel front wall, approx. 1,600 mm high - 3 transverse stake pocket rails mounted in the floor of the loading platform, for plug-in stakes approx. 100 x 50 mm - 1 transverse stake pocket rail mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm - 1 additional lockable INOX toolbox under the loading platform - WADER container pockets in the loading platform for transporting: 2x 20' containers or 1x 40' container - Central lubrication system with 2 pumps, BEKAMAX brand - Complete HRM metallisation (High Resistance Metallisation)