Durumu: yeni, Unladen weight: 120,000 kg Cargo compartment volume: 160,000 l STANDARD CONDITIONS The plant is designed for the production of 160 t/h of road mix with a finished product at an initial moisture content of 4% and 160°C under the following standard conditions: • Aggregate temperature at dryer inlet: 10°C. • Sea level altitude • Average density of the feed aggregates: 1,650 kg/m³ • Heavy fuel oil No. 6 calorific value ≥ 9,200 kCal/kg • Heavy fuel oil No. 4 calorific value ≥ 9,700 kCal/kg • Calorific value for diesel oil ≥ 10,200 kCal/kg • Natural gas calorific value ≥ 7,600 kCal/kg • Temperature rise of hot aggregates: 160 K • Residual moisture content in mix: 0.3% • Max. aggregate size: 40 mm • Material pass-through sieve 3 mm: 35% • Material is non-porous and non-hygroscopic with regular shape • Production tolerance rate as per environmental and parameter conditions: ±4% COLD AGGREGATE BUNKERS • Four cold aggregate hoppers made of 5 mm St 37-grade steel plate are required, each approximately 20 m³ in size and manufactured separately. • The hoppers must be fitted with 800 mm upper extensions made from 6 mm steel to prevent overflow of material. • Discharge of material from the hoppers must be achieved with a moving feeder assembly. • Material flow from each hopper must be optionally frequency-controlled (speed-controlled) and adjustable via the computer screen. • The discharge rate of each hopper can be set via manual gate levers, which must be available on every hopper. • A warning system must be present if the aggregate in the hopper runs out, with a warning sign displayed on the operator screen. • A vibrator motor, controlled from the operator screen, must be installed to facilitate material flow and prevent blockages in hoppers containing fine materials. • A conveyor belt system must be installed beneath each hopper to ensure safe material transfer. Guodpfx Aew Hzk Dod Reh • Each hopper must be equipped with modular grids made from 10x50 plates with a 10 mm bar diameter. • Silo loading width must be 3000x2400 mm. • An emergency pull-cord shutdown system must be in place. • Possible malfunctions of the belts must be displayed on the operator screen. 2. SUB-HOPPER COLD AGGREGATE COLLECTOR BELT • The horizontal belt must transfer material taken separately from each hopper in a controlled fashion to the inclined dryer feed belt, and be capable of supplying material to a plant with a capacity of 160 t/h. • The rubber belt must be 10 mm thick, 800 mm wide, 4-ply EP 125-grade fabric. • The belt's start/stop operation must be controllable via the operator screen. To empty hoppers at season’s end, the belt must be capable of reverse operation independently of the other units. • The horizontal conveyor frame must be constructed from structural steel, ensuring smooth operation and including a belt tensioning system. • The belt must be equipped with a stripping system at both ends. • The drive drum must be rubber-coated and have a 1-degree angle. • For emergencies...

Durumu: yeni, Üretim yılı: 2025, Stokta var Dünya çapında teslimat Dizel motor. Tambur kapasitesi (0,8 m3). 50 litrelik yakıt deposu (yakıt seviyesi göstergesi ile donatılmıştır). Göstergeli kontrol paneli. Tank içinde asfalt karıştırma. Önden yükleme/boşaltma. Gjdpfx Adod Swnvs Rouh Daha fazla seçenek: Kova + römork Fragman Römork yok, kova yok

Durumu: kullanılmış, güç: 43 kW (58,46 bg), yakıt türü: dizel, Üretim yılı: 2007, çalışma saatleri: 9.096 h, Kullanılabilir malzeme: Asfalt Gedpexmhv Defx Ad Reuh Boş ağırlık: 4.550 kg

Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2025, *Tüm ürünlerimiz özenle üretilmiş olup 1 yıl garanti kapsamındadır! *Kurulum ve Operatör Eğitimi ÜCRETSİZDİR COMPACT serisi Sabit Beton Santralleri, pratik ve etkili çözümlerle her seviyedeki ihtiyaca memnuniyetle cevap verir. Sabit beton santralleri, homojen beton karışımını yüksek kapasitede üretime kolayca ve verimli bir şekilde ulaşabilir. COMPACT serisi, kolay kullanım sistemi ve en düşük yatırım maliyetlerine sahiptir. Ayrıca, tesis işletme kaynaklarının doğru kullanılmasını sağlayarak, zaman tasarrufunu daha fazla kazanca dönüştürür. TEKNİK ÖZELLİKLER: Model: COMPACT 120 Üretim kapasitesi: 120 m³ Mikser tipi: Çift Milli – 3 m³ Agrega bunkeri: 4x20 m³ Çimento tartım: 1750 kg Katkı tartımı: 40 kg Gedpfowx E Htex Ad Reuh Su tartımı: 1000 lt Çimento silosu opsiyoneldir. COMPACT 120 aşağıdakilerden oluşur: • Agrega Stok Bunkeri • Agrega Tartım Bunkeri • Agrega Transfer Konveyörü veya Kova Sistemi • Çift Milli Mikser • Mikser Şasisi, Yürüyüş Platformları, Merdiven • Su Tartım Bunkeri • Çimento Tartım Bunkeri • Katkı Tartım Bunkeri • Hava Kompresörü • Çimento Vidalı Konveyörü • Cıvatalı Çimento Silosu • Üst Filtre, Emniyet Valfi ve Aksesuarlar • Kontrol Kabini • Bilgisayar ve Otomasyon Sistemi • Kontrol ve Güç Panosu DETAYLI BİLGİ İÇİN LÜTFEN BİZİ ARAMAKTAN ÇEKİNMEYİNİZ!

Durumu: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2020, çalışma saatleri: 2.000 h, Motor: Üretici: Cummins Motor gücü: 149 kW Emisyon seviyesi: Stage V - Ağırlık: 20 ton - Finisher tablası: V6000 TV GAS SPS 2019 - Tamper / Titreşim - Isıtma: Gaz - Tabla çalışma genişliği: 3,0 - 6,0 m - Tabla ek parça ile çalışma genişliği: 7,5 m - Dengeleme sistemi - Yükseklik sensörleri - Ultrasonik: 2 adet - Helezon kontrolü ultrasonik Gedpfx Ajxnbaxed Rouh - Enine eğim sensörü - Merkezi yağlama - Çatı profili hidrolik - Yan plakalar hidrolik - Truck Assist Advanced - Setassist - Konforlu koltuk (ısıtmalı) - Egzoz gazı emişi - LED farlar

Durumu: kullanılmış, Üretim yılı: 2004, Bir asfalt plenti alt grubu - RC besleme ve kurutma tamburu -Brülörlü RC kurutma tamburu -Tam çelik konstrüksiyon/alt yapı -Elevatör -2 x RC besleme bunkeri ve konveyör bant -Karma kulesine aktarım Gujdpexmv Riefx Ad Rsh

Durumu: kullanılmış, Polygonmach PVB150 Mobil Beton Santrali | Soğuk asfalt plent, RCC karıştırma tesisi, zemin stabilizasyon karıştırma tesisi, emülsiyon karıştırma tesisi Polygonmach PVB150, modern inşaat projelerinin hız, esneklik ve maliyet etkinliği taleplerini karşılamak üzere tasarlanmış yeni nesil bir mobil beton santralidir. Hem Hacimsel hem de Betonerleme (Batch Tipi) üretimi aynı platformda sunar; bu sayede her tür projeye mükemmel uyum sağlar. ✅ Çift Modlu Esneklik: • Hacimsel Mod: Sahada anında, talebe göre 200 m³/saate kadar üretim • Betonerleme Modu: Hassas reçeteye dayalı 100 m³/saate kadar üretim ✅ Temel Özellikler: • Tam Otomatik veya Manuel Çalışma: Kullanıcı dostu kontrol paneli ile kolay yönetim • Hassas Tartım Sistemi: Doğru dozaj, minimum malzeme israfı • Çoklu Karışım Reçeteleri: Farklı karışım tipleri arasında kolayca geçiş • Ayrı Depolama Bunkerleri: 3x8 m³ agrega bunkerleri, 5 tonluk çimento silosu, su ve katkı tankları • Dolum Konveyörü: Hızlı ve verimli yükleme • Hızlı Kurulum: 10 dakika içinde kullanıma hazır • Tam Mobil: Şantiyeler arası maksimum taşıma kolaylığı • Düşük Lojistik & Nakliye Maliyeti: Yerinde üretim, hazır beton kayıplarını ortadan kaldırır • Sürdürülebilir Üretim: İhtiyacınız kadar, ihtiyacınız olduğunda üretim • Geri Dönüşüm Dostu: Gerekirse geri dönüştürülmüş malzeme kullanımına uygundur Guedsw Hztfjpfx Ad Rjh ⸻ ? Çok Amaçlı Kullanım – Tek Platformda Çoklu Çözümler: Beton üretimine ek olarak, PVB150 şu modlarda da kullanılabilir: • Mekanik Stabilizasyon Tesisi • Soğuk Asfalt Karıştırma Tesisi • Emülsiyon Karıştırma Tesisi • Zemin Stabilizasyon Karıştırma Tesisi Bu çok fonksiyonlu sistem, Polygonmach PVB150’yi yol yapım, altyapı geliştirme ve kısa süreli ya da küçük-orta ölçekli projeler için piyasadaki en çok yönlü çözüm haline getirir. ⸻ 🇹🇷 %100 Türkiye üretimi | Akıllı Teknoloji | Yüksek Performans | Çevre Dostu İşletim ✅ Sabit tesisleri daha akıllı bir çözümle değiştirin. ✅ Kurulum maliyetlerini azaltın, mobiliteyi artırın, şantiye verimliliğini yükseltin. ⸻ ? Şimdi bizimle iletişime geçin, şantiyenizi dönüştürün!

Durumu: yeni, Üretim yılı: 2025, Constmach olarak inşaat ve altyapı projelerinizde ihtiyaç duyduğunuz mobil çözümleri sunmaktan gurur duyuyoruz. Mobil asfalt plentlerimiz taşınabilirliği, hızlı kurulumu ve üstün performansı ile sektörde fark yaratıyor. Neden Constmach Mobil Asfalt Plenti? Yüksek Taşınabilirlik: Mobil asfalt plentlerimiz kolayca taşınabilir ve hızlı bir şekilde kurulabilir. Farklı sahalardaki projelerinizin kesintisiz ilerlemesini sağlar. Üstün Performans: İleri teknoloji ve kaliteli malzemelerle üretilen tesislerimiz, yüksek üretim kapasitesi ve verimlilik sunar. Çevre Dostu: Düşük emisyonlu ve çevre dostu üretim süreçleri ile doğayı korumanın bilincindeyiz. Kullanıcı Dostu: Kolay kullanım ve bakım özellikleri ile operatörlerin iş yükünü hafifletir. Teknik Destek: Satış öncesi ve sonrası sunduğumuz kapsamlı teknik destek ile her zaman yanınızdayız. Öne Çıkan Özellikler: Hızlı Kurulum ve Taşıma: Pratik kurulum ve taşıma özellikleri sayesinde sahalar arası geçişlerde zaman ve maliyet tasarrufu sağlar. Esnek Kapasite Seçenekleri: Farklı kapasitelerdeki modellerimiz ile her türlü proje için ideal çözümler sunuyoruz. Gsdeud T Dajpfx Ad Rouh Gelişmiş Otomasyon: Modern otomasyon ve kontrol sistemleri ile operasyonel verimliliği artırır. Dayanıklı Yapı: Zorlu çalışma koşullarına dayanıklı ve uzun ömürlü tasarım. Constmach mobil asfalt plentleri ile projelerinizde esneklik ve performansı bir arada yaşayın. Yüksek kaliteli, taşınabilir ve çevre dostu çözümlerimiz ile projelerinizi daha verimli ve hızlı bir şekilde tamamlayın. Mobil asfalt plentlerimizin avantajlarını keşfetmek ve projelerinizi bir üst seviyeye taşımak için bizimle iletişime geçin!

Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2025, *Tüm ürünlerimiz özenle üretilmiş olup 1 yıl garantilidir! *Kurulum ve Operatör Eğitimi ÜCRETSİZDİR COMPACT serisi Sabit Beton Santralleri, pratik ve etkili çözümler ile her seviyedeki ihtiyacı karşılayacak şekilde müşteri memnuniyeti sağlar. Sabit beton santralleri, homojen beton karışımının yüksek kapasitelerde kolay ve verimli bir şekilde üretilmesini sağlar. COMPACT serisi, kolay kullanım sistemi ve en düşük yatırım maliyetine sahiptir. Ayrıca tesis, işletme kaynaklarının doğru kullanılmasını sağlayarak zaman tasarrufunun daha fazla kazanca dönüşmesini mümkün kılar. TEKNİK ÖZELLİKLER: Model: COMPACT 110 Üretim kapasitesi: 100 m3 Mikser tipi: Çift milli – 2 m3 Agrega bunkeri: 4x20 m3 Çimento tartımı: 900 kg Katkı tartımı: 40 kg Su tartımı: 700 lt Çimento silosu opsiyoneldir. COMPACT 110'un bileşenleri: • Agrega Depolama Bunkeri • Agrega Tartım Bunkeri • Agrega Transfer Konveyörü veya Kova Sistemi • Çift Milli Mikser Gedswx Ixfepfx Ad Rsuh • Mikser Şasisi, Yürüme Yolları, Merdiven • Su Tartım Bunkeri • Çimento Tartım Bunkeri • Katkı Tartım Bunkeri • Hava Kompresörü • Çimento Vidalı Konveyör • Cıvatalı Çimento Silosu • Üst Filtre, Emniyet Valfi ve Aksesuarlar • Kontrol Kabini • PC ve Otomasyon Sistemi • Kontrol ve Güç Panosu DETAYLI BİLGİ İÇİN LÜTFEN BİZİ ARAMAKTAN ÇEKİNMEYİNİZ!!!

Durumu: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2017, çalışma saatleri: 1.500 h, - Çalışma genişliği: 1,20 - 2,40 m, uzatmalarla 3,10 m'ye kadar - Karışım haznesi, hazne duvarlarının bağımsız kontrolü ile - Vida odasında ultrasonik sensörler - Dört adet halojen çalışma farı (2 önde + 2 arkada) - Uzaktan kumanda - Mobamatic tesviye - Variobohle V 240 TV genişletilebilir tabla - Gazlı ısıtma Guodpexm S Hgsfx Ad Roh - 350 mm sol/sağ küçültme pabuçları - Deutz TD2.9 L4 dizel motor - 54 kW - EUIV (T4)

Durumu: yeni, Unladen weight: 240,000 kg Cargo area capacity: 3,000,000 l FULLY AUTOMATIC ASPHALT PLANT 1.1 AGGREGATE BUNKERS (6 x 12 m³) 6 pcs 1.2 Bunker and dosing belts 1+1 feed 1.3 Distributor and dryer mounted on conveyor belt 1 pc 1.4 STATIONARY CHASSIS 1 pc 1.5 ROTARY DRYER UNIT 1 pc 1.6 Dryer drum 1 pc 1.7 Common inlet 1 pc 1.8 Common outlet 1 pc 1.9 Burner unit (BALTUR) 1 set 1.10 Burner fuel pump 1 pc 1.11 Burner blower 1 pc 1.12 Elevator inlet 1 pc 2.1 MIXER CHASSIS UNIT 1 pc 2.2 Asphalt mixer + hot aggregate elevator 1 pc 2.3 Common weighing hopper 1 pc 2.4 Loading crane and weighing vessel 1 pc 2.5 Screw conveyor for loading 1 pc 2.6 Bitumen weighing vessel 1 pc 2.7 Bitumen pump mixer 1 pc 2.8 Hot silo (50 t) 3 pcs 2.9 Silo for stock filling 25 m³ 2 pcs 2.10 Vibrating screen 1 pc 3 DUST COLLECTION FILTER 3.1 Jet-pulse filter housing 1 set 3.2 Nomex filter bags and cartridges 1 set 3.3 V spiral dust collector and 1+1 bunker set 3.4 Filling silo (25 t) 2 sets 3.5 Set of screw conveyors for loading 2 pcs 3.6 Filter suction fan 1 set 3.7 Set 1 for contaminated gas duct Guedpow Hzbcsfx Ad Rsh 3.8 Housing group set 1 pc 4 BITUMEN TANK 4.1 Insulated bitumen tank for oil heating, 50 t capacity (one for PMB) with mixer (vertical), 3 sets 4.2 3-way pneumatic lining valve group 2 sets 4.3 Bitumen pump mixer 1 set 4.5 Metering line for the mixer's bitumen balance 1 set 4.6 Bitumen transfer pump 1 set 4.7 Double-walled bitumen pipe installation 1 set 4.8 Bitumen tank for heating oil, 50 t capacity for hot oil 1 set 4.9 Three-way valve group 2 with pneumatic lining set 5 CHASSIS FOR FUEL AND THERMAL OIL GROUPS 5.1 Thermal oil heater, capacity 1,000,000 kcal/h, 1 set 5.2 Oil boiler 1 set 5.3 Feed oil circulation pump 1 set 5.4 Fuel pump 1 set 5.5 Fuel pump 1 set 5.6 Automation compressor for cabin control software 1 set 6 Granulate feeding system (fractional feed with fan drive) 1 set 7. Cold asphalt recycling system (5 m³ hopper, 500x22,000 mm belt conveyor, 800x4,000 mm belt conveyor with weighing system) 1 set 8. Lining (3 mm layer on 50x50 profile sheeting) for aggregate tank and mixer floor 1 set 9. Real-time gas emission measurement and monitoring system (integrated in PLC and plant automation) (available via internet connection) 1 set 10. Dust monitoring PCE-PQC 23US incl. calibration certificate 1 set

Durumu: kullanılmış, Die stationäre Heißmischasphaltanlage von Polygonmach ist eine fest installierte Asphaltmischanlage, die kontinuierlich Heißmischasphalt produziert. Sie ist nicht mobil und kommt typischerweise bei groß angelegten Asphaltproduktionsprojekten zum Einsatz. Die Kapazität variiert zwischen 60 und 400 Tonnen pro Stunde. Funktionen der stationären Asphaltmischanlagen von Polygonmach: Gujdpsw Hzqwjfx Ad Rsh 1. Zuschlagstofflagerung und -handling: Die Anlage verfügt über Vorratsbunker oder Silos zur Lagerung unterschiedlicher Korngrößen der Zuschlagstoffe. Diese Zuschlagstoffe werden sortiert und dem Produktionsprozess zugeführt. 2. Trocknung und Erhitzung: Die Zuschlagstoffe werden in einer Trommel oder einem Trockner getrocknet und auf die optimale Temperatur erhitzt, um ein einwandfreies Mischergebnis zu gewährleisten. 3. Lagerung und Erhitzung des Bitumenbindemittels: Die Anlage verfügt über Lagertanks für das Asphaltbindemittel, das auf die erforderliche Temperatur erhitzt wird, bevor es mit den Zuschlagstoffen vermischt wird. 4. Mischen: Die erhitzten Zuschlagstoffe werden zusammen mit dem Bitumenbindemittel in einem kontinuierlichen oder chargenweisen Prozess vermischt, abhängig vom Anlagentyp. 5. Lagerung und Verladung: Das fertige Heißmischgut wird in Silos oder Lagerbehältern zwischengelagert, bevor es zur Baustelle transportiert wird. Einsatzgebiete für stationäre Asphaltmischanlagen von Polygonmach sind unter anderem Straßenbau, Autobahnprojekte, Flughafenrollbahnen, Parkplätze sowie andere großflächige Asphaltierungsarbeiten. Der Betrieb einer stationären Asphaltmischanlage von Polygonmach umfasst typischerweise folgende Schritte: - Die Zuschlagstoffe werden in den vorgesehenen Bunkern/Silos gelagert. - Anschließend gelangen sie in den Trocknungstrommel, wo sie getrocknet und erhitzt werden. - Die erhitzten Zuschlagstoffe werden der Mischanlage zugeführt. Optionen: stationär, kontinuierlich Kapazität: Max.: 400 t/h (245 lb/s), Min.: 60 t/h (37 lb/s)

Durumu: kullanılmış, Üretim yılı: 2024, Die stationäre Heißmischasphaltanlage von Polygonmach ist eine fest installierte Asphaltmischanlage, die kontinuierlich Heißmischasphalt produziert. Sie ist nicht mobil und kommt typischerweise bei groß angelegten Asphaltproduktionsprojekten zum Einsatz. Die Kapazität variiert zwischen 60 und 400 Tonnen pro Stunde. Funktionen der stationären Asphaltmischanlagen von Polygonmach: 1. Zuschlagstofflagerung und -handling: Die Anlage verfügt über Vorratsbunker oder Silos zur Lagerung unterschiedlicher Korngrößen der Zuschlagstoffe. Diese Zuschlagstoffe werden sortiert und dem Produktionsprozess zugeführt. 2. Trocknung und Erhitzung: Die Zuschlagstoffe werden in einer Trommel oder einem Trockner getrocknet und auf die optimale Temperatur erhitzt, um ein einwandfreies Mischergebnis zu gewährleisten. 3. Lagerung und Erhitzung des Bitumenbindemittels: Die Anlage verfügt über Lagertanks für das Asphaltbindemittel, das auf die erforderliche Temperatur erhitzt wird, bevor es mit den Zuschlagstoffen vermischt wird. 4. Mischen: Die erhitzten Zuschlagstoffe werden zusammen mit dem Bitumenbindemittel in einem kontinuierlichen oder chargenweisen Prozess vermischt, abhängig vom Anlagentyp. 5. Lagerung und Verladung: Das fertige Heißmischgut wird in Silos oder Lagerbehältern zwischengelagert, bevor es zur Baustelle transportiert wird. Einsatzgebiete für stationäre Asphaltmischanlagen von Polygonmach sind unter anderem Straßenbau, Autobahnprojekte, Flughafenrollbahnen, Parkplätze sowie andere großflächige Asphaltierungsarbeiten. Der Betrieb einer stationären Asphaltmischanlage von Polygonmach umfasst typischerweise folgende Schritte: - Die Zuschlagstoffe werden in den vorgesehenen Bunkern/Silos gelagert. - Anschließend gelangen sie in den Trocknungstrommel, wo sie getrocknet und erhitzt werden. - Die erhitzten Zuschlagstoffe werden der Mischanlage zugeführt. Gujdsw Hzp Hjpfx Ad Rsh Optionen: stationär, kontinuierlich Kapazität: Max.: 400 t/h (245 lb/s), Min.: 60 t/h (37 lb/s)

Durumu: yeni, renk: mavi, Üretim yılı: 2022, Unladen weight: 300,000 kg Loading compartment capacity: 3,000,000 l Warranty: 24 months 1.1 Coled Aggregate Feeding Chassis 5 pcs 1.2 Supply of Feed Hoppers and Dosing Conveyors 1 + 1 pcs 1.3 Collector and Dryer mounted on Conveyor 1 1.4 Stationary Chassis 1 1.5 Rotary Dryer Group 1 1.6 Dryer Body 1 1.7 Aggregate Inlet Head 1 1.8 Aggregate Outlet Head 1 1.9 Burner Group (BALTUR) 1 set 1.10 Burner Fuel Pump 1 1.11 Burner Blower 1 1.12 Elevator Inlet 1 2.1 Mixer Chassis Group 1 2.2 Asphalt Mixer + Hot Aggregate Elevator 1 2.3 Aggregate Weighing Hopper 1 Gedpew Hzbijfx Ad Rouh 2.4 Filler Elevator and Weighing Hopper 1 2.5 Filler Screw Conveyor 1 2.6 Bitumen Weighing Hopper 1 2.7 Mixing Bitumen Pump 1 2.8 Hot Aggregate Silo (50t) Undersized 1 2.9 Filler Material Silo 25 m³ 1 2.10 Vibrating Screen 1 3 Dust Collection Filter Set 3.1 Jet-Pulse Filter Body 1 set 3.2 Nomex Filter Bags and Cartridges 1 set 3.3 Dust Collector V Spiral and Hopper 1 + 1 set 3.4 Filler Silo (25 tons) 1 set 3.5 Filler Screw Conveyor 1 set 3.6 Filter Suction Fan 1 set 3.7 Dirty Gas Duct 1 set 3.8 Housing Group 1 set 4 Bitumen Storage Tank 4.1 40 Tons Capacity Bitumen Tank with Thermal Oil Heating and Insulation 4 sets 4.2 3-Way Pneumatic Jacketed Valve Group 2 sets 4.3 Bitumen Delivery Pump 1 set 4.5 Mixing Bitumen Scale Feed Line 1 set 4.6 Bitumen Transfer Pump 1 set 4.7 Double-walled Bitumen Pipe Installations 1 set 4.8 30 Tons Capacity Bitumen Tank for Thermal Oil Heating 3 sets 4.9 3-Way Pneumatic Jacketed Valve Group 2 sets 5 Chassis Group for Fuel and Thermal Generators 5.1 1,500,000 kcal/h Capacity Thermal Oil Generator 1 set 5.2 Thermal Oil Boiler 1 set 5.3 Circulation Pump for Thermal Oil 1 set 5.4 Fuel Refill Pump 1 set 5.5 Fuel Pump 1 set 5.6 Automation-Control Cabin-Software-Compressor 1 set

Durumu: kullanılmış, renk: turuncu, Garanti: 24 ay Guedpfx Asw Hzgxsd Rjh

Durumu: kullanılmış, Die stationäre Heißmischasphaltanlage von Polygonmach ist eine fest installierte Asphaltmischanlage, die kontinuierlich Heißmischasphalt produziert. Sie ist nicht mobil und kommt typischerweise bei groß angelegten Asphaltproduktionsprojekten zum Einsatz. Die Kapazität variiert zwischen 60 und 400 Tonnen pro Stunde. Funktionen der stationären Asphaltmischanlagen von Polygonmach: 1. Zuschlagstofflagerung und -handling: Die Anlage verfügt über Vorratsbunker oder Silos zur Lagerung unterschiedlicher Korngrößen der Zuschlagstoffe. Diese Zuschlagstoffe werden sortiert und dem Produktionsprozess zugeführt. 2. Trocknung und Erhitzung: Die Zuschlagstoffe werden in einer Trommel oder einem Trockner getrocknet und auf die optimale Temperatur erhitzt, um ein einwandfreies Mischergebnis zu gewährleisten. 3. Lagerung und Erhitzung des Bitumenbindemittels: Die Anlage verfügt über Lagertanks für das Asphaltbindemittel, das auf die erforderliche Temperatur erhitzt wird, bevor es mit den Zuschlagstoffen vermischt wird. 4. Mischen: Die erhitzten Zuschlagstoffe werden zusammen mit dem Bitumenbindemittel in einem kontinuierlichen oder chargenweisen Prozess vermischt, abhängig vom Anlagentyp. Gjdpfjw Hzqqox Ad Reuh 5. Lagerung und Verladung: Das fertige Heißmischgut wird in Silos oder Lagerbehältern zwischengelagert, bevor es zur Baustelle transportiert wird. Einsatzgebiete für stationäre Asphaltmischanlagen von Polygonmach sind unter anderem Straßenbau, Autobahnprojekte, Flughafenrollbahnen, Parkplätze sowie andere großflächige Asphaltierungsarbeiten. Der Betrieb einer stationären Asphaltmischanlage von Polygonmach umfasst typischerweise folgende Schritte: - Die Zuschlagstoffe werden in den vorgesehenen Bunkern/Silos gelagert. - Anschließend gelangen sie in den Trocknungstrommel, wo sie getrocknet und erhitzt werden. - Die erhitzten Zuschlagstoffe werden der Mischanlage zugeführt. Optionen: stationär, kontinuierlich Kapazität: Max.: 400 t/h (245 lb/s), Min.: 60 t/h (37 lb/s)

Durumu: kullanılmış, Die Polygonmach Trommelmischanlage bzw. kontinuierliche Heißmisch-Asphaltmischanlage ist eine Art Asphaltmischanlage, bei der die Erhitzungs- und Mischvorgänge kontinuierlich innerhalb einer rotierenden Trommel ablaufen. Die Funktionen einer Trommelmisch-/kontinuierlichen Polygonmach Asphaltmischanlage umfassen: - Zuschlagstofflagerung und -handling: Die Anlage verfügt über Vorratsbunker oder Silos zur Lagerung verschiedener Zuschlagstoffgrößen. Diese Zuschlagstoffe werden sortiert und der Anlage zur Weiterverarbeitung zugeführt. - Trocknung und Erhitzung: Die Zuschlagstoffe werden in die rotierende Trommel eingebracht, wo sie durch heiße Gase erhitzt und getrocknet werden. Dieser Prozess entzieht den Zuschlagstoffen die Feuchtigkeit. - Lagerung und Erhitzung des Asphaltbindemittels: Die Anlage verfügt über Lagertanks zur Bevorratung des Asphaltbindemittels, welches vor der Zugabe in die Trommel auf die erforderliche Temperatur erhitzt wird. - Mischen: Während die Zuschlagstoffe die Trommel durchlaufen, kommen sie mit dem heißen Asphaltbindemittel in Kontakt, wodurch die Materialien zu Heißmischasphalt verarbeitet werden. - Lagerung und Austrag: Der fertige Heißmischasphalt wird vorübergehend in Silos oder Vorratsbunkern zwischengelagert, bis er zur Verladung auf Lkw und zum Transport zur Baustelle bereitsteht. Guedpow Hzqkefx Ad Reh Polygonmach Trommelmisch-/kontinuierliche Asphaltmischanlagen werden in unterschiedlichsten Anwendungen eingesetzt, z. B. im Straßenbau, bei Autobahnprojekten, auf Flughafenrollbahnen und für großflächige Asphaltierarbeiten. Option: kontinuierlich Leistungskapazität: Max.: 400 t/h (245 lb/s) Min.: 40 t/h (24 lb/s)

Durumu: kullanılmış, Die mobile oder tragbare Heißmisch-Asphaltmischanlage von Polygonmach ist eine Art von Asphaltmischanlage, die für einen einfachen Transport und schnellen Aufbau an verschiedenen Einsatzorten konzipiert ist. Im Gegensatz zu stationären Anlagen können Polygonmach-Mobilanlagen schnell montiert, demontiert und bei Bedarf an andere Standorte versetzt werden. Die Kapazität variiert abhängig vom Design zwischen 40 und 200 t/h. Die Funktionen der Polygonmach mobilen/tragbaren Asphaltmischanlage entsprechen im Wesentlichen denen einer stationären Anlage und umfassen: Gedpfx Aew Hzqded Rjuh - Aufbewahrung und Handhabung von Zuschlagstoffen: Polygonmach-Mobilanlagen sind mit Vorratsbunkern oder Silos zur Lagerung von Gesteinskörnungen unterschiedlicher Korngrößen ausgestattet. Diese Zuschlagstoffe werden sortiert und der Anlage zur Weiterverarbeitung zugeführt. - Trocknung und Erwärmung: Die Zuschlagstoffe werden in einem Trockner oder einer Trommel getrocknet und auf die erforderliche Temperatur gebracht, um eine optimale Mischung mit dem Asphalt zu gewährleisten. - Aufbewahrung und Erwärmung des Bitumenbindemittels: Polygonmach-Mobilanlagen verfügen über Lagertanks für das Bindemittel (Bitumen), das vor dem Mischen mit den Zuschlagstoffen auf eine definierte Temperatur erhitzt wird. - Mischen: Die erhitzten Zuschlagstoffe und das Bindemittel werden in der Anlage vermischt, um Heißmischasphalt zu erzeugen. Je nach Anlagentyp kann das Mischen im Chargenbetrieb oder kontinuierlich erfolgen. - Zwischenlagerung und Verladung: Der produzierte Heißmischasphalt wird temporär in Silos oder Bunkern zwischengelagert, bis er für den Abtransport zur Baustelle auf LKW verladen wird. Optionen: mobil, kontinuierlich Kapazität: max.: 200 t/h, min.: 40 t/h

Durumu: kullanılmış, New: Yes Color: Silver Usable Material: Bitumen Unladen Weight: 9,500 kg Cargo Space Capacity: 50,000 l BITUMEN TANK (50 TONS) • The tank capacity must be 50 tons. • The tanks must be manufactured in accordance with TSE practices and Highway Commission standards. • The tank must be equipped with a thermal oil heating system. • Seamless coil pipe system for heating • Bitumen temperature up to mixing temperature Gedpfxew Hzkws Ad Rjuh • The fuel tank must include a level and temperature indicator, suction nozzle, filler opening, and ventilation system, inspection hatch, and drain. • Support legs must be provided under the tank, and its surface must be insulated with 50 mm rock wool and covered with 0.80 mm galvanized sheet metal. 1. THERMAL OIL GENERATOR • The generator capacity must be 2,000,000 kcal/h. • The system must be designed for diesel fuel operation. • The generator must include a 1,500 l filling tank. • The generator must be horizontal, equipped with a seamless steel-drawn hot oil pipe, double-walled and of circulation type. • The generator body must be insulated with 100 mm rock wool and covered with aluminum sheet metal. • The generator system must be manufactured to production standards and must include a compensating tank, degasser, oil filter, valves and a fully automatic ignition-controlled burner, control panel, pump, and necessary safety equipment. • The coil consists of at least 30 m² of seamless steel tubing. • The generator must be equipped with an integrated warning system to protect the entire system against hazardous situations caused by hot oil level or low heat transfer oil. • The burner system must be automatically activated depending on the set operating temperature of the heat transfer oil. • The system must be supplied as a complete package.

Durumu: yeni, güç: 450 kW (611,83 bg), yakıt türü: gaz, renk: mavi, Üretim yılı: 2021, Year of manufacture: 2021 Unladen weight: 215,000 kg Engine brand: Perkins Loading compartment capacity: 4,000 l Robust asphalt plant base, 240 tons/hour 1.1 Cold aggregate feeding chassis 5 1.2 Aggregate hopper and dosing conveyor belts 1 + 1 1.3 Collector and dryer mounted on the conveyor belt 1 1.4 Stationary chassis 1 1.5 Rotary dryer assembly 1 1.6 Dryer drum 1 1.7 Aggregate inlet head 1 1.8 Aggregate outlet head 1 1.9 Burner unit (BALTUR) 1 set 1.10 Burner fuel pump 1 1.11 Burner blower 1 1.12 Elevator inlet 1 2.1 Mixer chassis assembly 1 2.2 Asphalt mixer + hot aggregate elevator 1 2.3 Total weighing bunker 1 2.4 Filler elevator and weighing bunker 1 2.5 Filler screw conveyor 1 2.6 Bitumen weighing bunker 1 2.7 Mixed bitumen pump 1 2.8 Hot aggregate silo (50T) undersize 1 2.9 Filler material silo 25 m³ 1 2.10 Vibrating screen 1 3 DUST COLLECTION FILTER SET 3.1 Jet-pulse filter body 1 set 3.2 Nomex filter bags and cartridges 1 set 3.3 Dust collector V spiral and hopper 1 + 1 set 3.4 Filler silo (25 tons) 1 set 3.5 Filler screw conveyor 1 set 3.6 Filter extraction fan 1 set Gujdpfxsw Hzi Ho Ad Rsh 3.7 Dirty gas duct 1 set 3.8 Casing assembly 1 set 4 BITUMEN STORAGE TANK 4.1 40 ton capacity bitumen tank with thermal oil heating and insulation 4 sets 4.2 3-way pneumatic jacketed valve assembly 2 sets 4.3 Bitumen feed pump 1 set 4.5 Mixed bitumen weighing supply line 1 set 4.6 Bitumen transfer pump 1 set 4.7 Double-walled bitumen piping installation 1 set 4.8 30 ton capacity bitumen tank for thermal oil heating 3 sets 4.9 3-way pneumatic jacketed valve assembly 2 sets 5 FUEL AND THERMAL GENERATOR CHASSIS ASSEMBLY 5.1 1,500,000 kcal/h thermal oil generator 1 set 5.2 Thermal oil boiler 1 set 5.3 Thermal oil circulation pump 1 set 5.4 Fuel refill pump 1 set 5.5 Fuel pump 1 set 5.6 Automation-control cabin-software-compressor 1 set

Durumu: kullanılmış, New: Yes Color: Silver Usable Material: Bitumen Unladen Weight: 9,500 kg Cargo Space Capacity: 50,000 l BITUMEN TANK (50 TONS) • The tank capacity must be 50 tons. • The tanks must be manufactured in accordance with TSE practices and Highway Commission standards. • The tank must be equipped with a thermal oil heating system. • Seamless coil pipe system for heating • Bitumen temperature up to mixing temperature • The fuel tank must include a level and temperature indicator, suction nozzle, filler opening, and ventilation system, inspection hatch, and drain. • Support legs must be provided under the tank, and its surface must be insulated with 50 mm rock wool and covered with 0.80 mm galvanized sheet metal. 1. THERMAL OIL GENERATOR • The generator capacity must be 2,000,000 kcal/h. • The system must be designed for diesel fuel operation. • The generator must include a 1,500 l filling tank. • The generator must be horizontal, equipped with a seamless steel-drawn hot oil pipe, double-walled and of circulation type. • The generator body must be insulated with 100 mm rock wool and covered with aluminum sheet metal. • The generator system must be manufactured to production standards and must include a compensating tank, degasser, oil filter, valves and a fully automatic ignition-controlled burner, control panel, pump, and necessary safety equipment. • The coil consists of at least 30 m² of seamless steel tubing. • The generator must be equipped with an integrated warning system to protect the entire system against hazardous situations caused by hot oil level or low heat transfer oil. • The burner system must be automatically activated depending on the set operating temperature of the heat transfer oil. • The system must be supplied as a complete package. Godsw Hzfnepfx Ad Rouh

Durumu: kullanılmış, New: Yes Usable Material: Bitumen Unladen Weight: 16,000 kg Fully automatic bitumen emulsion system 1. COLLOID MILL (10 m³/hour) 1 2. FOAM TANK (5 m³) 1 3. BITUMEN FEED PUMP 1 4. FOAM GENERATION SYSTEM 1 5. PIPEWORK AND FITTINGS 1 6. CONTROL PANEL 1 7. CHASSIS 1 FOAM TANK (1 unit) - Frame - Box section profile - Capacity: 5 m³ - The tank body is made from 3 mm AISI 304 stainless steel plate - All welds are performed using appropriate stainless steel TIG welding b) Heating - 2-inch stainless steel pipe - Oil inlet and outlet pipes are 1 inch, DN50, PN16, DIN 2633 - Pressure test is performed at 6 bar c) Mixing system - 3 kW, 60 rpm agitator motor - Drive is by chain and sprocket - Sealing is achieved with packings - Bearings are SKF or FAG - Fixed baffles on the outer walls are installed to improve dispersion and ensure a homogeneous structure d) Temperature indicators are both digital and analogue, with two outputs provided - The bitumen pump capacity is max. 8 m³/h - Fitted with a 7.5 kW, 400 rpm gear motor - The bitumen meter is designed for a capacity of 10 m³/h a) Pipes - Manufactured from steel pipes in accordance with DIN 171175 (DN200, DN150, DN100, DN80, DN65, DN25) - The mill line consists of 1.5-inch inner pipe and 2-inch outer jacket pipe - Jacket pipes are welded to TSE standards - Bypass pipes are made at suitable locations in 0.5-inch diameter b) Expansion joints - DN 50, DN 80, PN 16, rated for 200°C c) 3-way and 2-way valves with heating Guedew Hzfzspfx Ad Roh - Compliant with TSE standards - Designed for operation under high pressure (16 bar) and temperature (230°C) d) Hot oil valves - Hot oil valves by KLINGER or THERMO, heat-resistant - DN25 PN16, DN65 PN16, DN50 PN16 e) Filter - Features an inner container made with 3 mm wire, designed for easy and frequent cleaning - - The panel is assembled in accordance with IC standard

Durumu: yeni, Boş ağırlık: 290.000 kg Yük bölmesi kapasitesi: 3.000.000 l Gujdpfjw Hzdkex Ad Rsh

Durumu: yeni, Curb weight: 16,000 kg Fully automatic bitumen emulsion system 1. COLLOID MILL (10 m3 / hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEED PUMP 1 4. FOAM SYSTEM 1 5. PIPEWORK AND EQUIPMENT 1 6. CONTROL PANEL 1 7. CHASSIS 1 FOAM TANK (1 unit) Frame: - Box section - Capacity: 5 m3 - The tank body is made from 3 mm stainless steel plate, AISI 304 - Weld seams are made using appropriate WIG stainless steel welding b) Heating: - 2-inch stainless steel pipe - The oil inlet and outlet pipes are 1 inch DN50, PN16, DIN 2633 - Leak test is conducted at 6 bar pressure. c) Mixing system: - 3 kW, 60 rpm mixing motor - Drive is outfitted with sprockets - Leak-tightness is ensured at the seals. - Bearings are SKF or FAG. - The fixed paddles on the outer walls are mounted to provide increased dispersion and a homogeneous structure. d) Temperature indicators are both digital and analog, and two outputs are provided. - The capacity of the bitumen pump is max. 8 m3/h - Driven by a 7.5 kW, 400 rpm gearmotor. - The bitumen meter is a system with a capacity of 10 m3/h. a) Pipes: - Made of steel according to DIN 171175 (DN200, DN150, DN100, DN80, DN65, DN25). - The mill line consists of an internal 1.5-inch pipe and an external 2-inch jacket pipe. Gedpfx Adsw Hzcaj Rouh - Jacket pipes are welded according to TSE standards. - Bypass pipes are made as 0.5 inch at appropriate points. b) Expansion joints: - DN 50, DN 80, PN 16 to 200 °C. c) 3-way and 2-way heated valves: - Conforming to TSE standards. - Suitable for working conditions under high pressure (16 bar) and temperature (230 °C) d) Hot oil valves: - Hot oil valves by KLINGER or THERMO brand. Heat resistant. - Sizes: DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter: - Made with a 3 mm wire inner container; designed for frequent and easy cleaning. - The panel is compiled in an IC-standard design.

Durumu: kullanılmış, New: Yes Usable Material: Bitumen Unladen weight: 18,000 kg Fully automatic polymer modification plant TECHNICAL SPECIFICATIONS Guedpew Hza Ssfx Ad Roh Grinding and homogenizing of polymer (SBS, APP, KRATON, etc.) and bitumen. Feed: bitumen-polymer premix Flow rate: max. 15 t/h Density: 1.1 g/cm³ Viscosity: max. 20,000 mPa s (cP) Temperature: 190 °C. Solid material: Machine inlet: max. 3–6 mm Machine outlet: max. 0.2 mm MOTOR 130 kW Speed 3,000 min-1 Voltage 400 V, 50 Hz, 3 phases Start method Y / Δ 2. VERTICAL MIXING TANK Frame: - Manufactured as a vertical rectangular profile. - Built to dimensions with a capacity of 11 m³. - The tank body is made from 5 mm St37-grade steel plate. - The bitumen fill pipe consists of 3" DN80, PN16, DIN2633 1 unit; the discharge pipe consists of 3" DN150, PN16, DIN2633 and 3" DN80, PN16, DIN2633 2 units. - The inspection cover measures 500 x 500 mm. b) Heating - Heated externally with diathermic hot oil. - Leak test conducted at not less than 6 bar. c) Insulation - 100 mm rapid wire mesh rock wool in compliance with Turkish Standards Institute (TSE). - External surface is made of stainless steel sheet, custom produced to tank dimensions. d) Mixing system - 2 x 7.5 kW agitator motors, 60 rpm - Chain-driven - Sealed at the drive unit for leak tightness - Bearings by SKF or FAG - Fixed blades mounted on the tank interior walls to enhance dispersion and achieve a homogeneous mixture e) Temperature indicators are digital and analogue with two outputs each. f) Integrated connection paddles, ladders, and platform included. 3. BITUMEN PUMPS - 2 ½ XLA type with oil heating - Pump capacity: 25 t/h bitumen pumps - Coupled with a 7.5 kW, 400 rpm gearmotor 4. SBS FEED UNIT (POLYMER MODIFIED GRANULES) a) Feed hopper - Slot width of 500 x 500 mm - Manufactured from 4 mm plate - Mounted with granule feed, 30 m³/h capacity, in the feed helix - Frame with 5 mm wall thickness, pipe diameter 220 mm - Leak tightness at the drive end - Bearings by SKF or FAG - 5.5 kW, 80 rpm gear motor with coupling drive 5. PIPEWORK AND EQUIPMENT a) Pipes - Steel pipes according to DIN 171175 (DN200, DN150, DN100, DN80, DN65, DN25) - Mill line built with 3" internal pipe and 4" outer jacket pipe - Jacket pipes welded to TSE standards - Bypass pipes at appropriate locations in 1" diameter b) Compensators - DN 50, DN 80, PN 16, for 400°C c) 3-way and 2-way heated valves - Conforms to TSE standards - Pneumatic control - For operation under high pressure (16 bar) and temperature (230°C) d) Hot oil valves - KLINGER or THERMO brand piston hot oil valves used - Dimensions: DN 25 PN16, DN65 PN16, DN50 PN16, etc.