Kullanılmış Sirch Unibox Abrolltrocknungscontainer satın al (22)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader (2+2) - nachlaufgelenkt
Çağrı
Koşul: yeni, azami yük ağırlığı: 51.780 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website.
The following is an excerpt from the equipment list. Full equipment details available on request.
GOOSENECK:
* Gooseneck in SNT design for optimized loading area length, approx. 3,700 mm long, with rear ramped section approx. 1,000 mm x 10°
* Suitable for tractor units: 4x2, 6x2, and 6x4
* Plug-in steel front wall, approx. 400 mm high
* ASPÖCK UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic power pack for controlling hydraulic functions (excluding hydraulic winches)
* Outer gooseneck beams with mounting holes for bolted lashing rings
* One mounting hole at the rear upper part of the outer beam for a bolted lashing ring
* 1 pair of screw-in lashing rings included (LC 10,000 daN)
* On the gooseneck: 1 pair of plug-in side aluminum drop sides, approx. 400 mm high, anodised finish
* On the gooseneck: 1 plug-in aluminum rear board, approx. 400 mm high, anodised finish
* Approx. 40 mm thick hardwood flooring above the gooseneck
* 2" kingpin
* 1 transverse stake pocket rail fitted in the gooseneck deck in front of the ramped section, for plug-in stakes approx. 100 x 50 mm
LOADING AREA:
* Extendable loading area, approx. 8,800 mm long, with rear ramped section approx. 500 mm x 10°
* Recessed well in the deck including the sloped section for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H)
* TPMS tire pressure monitoring system according to ECE R 141
* BPW axles and suspension, 1st and 2nd axles fixed, 3rd and 4th axles steering
* 3rd and 4th axles with electromagnetic reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each, air suspension with lift and lower valve
* Mechanical landing legs with 2-speed gearbox and crank
* Continuous hardwood flooring approx. 50 mm thick on deck and between axles (increases friction coefficient)
* 1 intermediate table with recessed platform, approx. 300 mm wide, for large cross-section sliding tube with sheet metal covering
* 1 pair of lashing rings on front cross-member (LC 10,000 daN)
* 6 pairs of recessed lashing rings in the outer frame, foldable outward (LC 10,000 daN)
* Additionally, 1 pair of external lashing rings on the front cross-member, oriented approx. 90° toward deck (LC 10,000 daN)
* Extendable galvanized side extensions, approx. 230 mm per side (without timber boards)
* 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in deck in front of 1st axle
* Between 2nd and 3rd axles: 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D)
* 1 pair mechanical rear supports
* 245/70 R 17.5 3PMSF dual tires, brand of our choice
HYDRAULIC LOADING RAMPS:
* DR-15/60-900-4350-HB-HV-M
Nwjdpfx Ajyhkrljknjg
* One pair of two-part steel ramps, approx. 4,350 mm long, 900 mm wide
* Hardwood decking
* Hydraulically folding ramp tips
* Each ramp hydraulically adjustable approx. 235 mm outward and 215 mm inward
* Hardwood decking on rear deck slope
* Ramp with hardwood surface
BRAKING SYSTEM:
* WABCO EBS-E braking system in accordance with EU regulations
SURFACE TREATMENT:
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% al...
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLESatteltieflader MAX100-N-3B-9.30-U
Çağrı
Koşul: yeni, azami yük ağırlığı: 38.953 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, MAX100-N-3B-9.30-U
Technical Data
Speed: 80 km/h
Gross vehicle weight: 49,500 kg
Fifth wheel load: 18,000 kg
Axle load: 31,500 kg
Unladen weight (+/- 3%): 10,547 kg
Payload approx.: 38,953 kg
Gooseneck length: 3,850 mm
Fifth wheel height loaded: 1,200 mm
Loading platform length: 9,300 mm
Extendable by: 0 mm
Axle spacing: 1,360 mm
Steering angle radius (rear): 2,300 mm
Loading height at max. load: 860 mm
Nwsdjg Sk Trspfx Aknjg
Overall width: 2,540 mm
Suspension travel: -55/+145 mm
Technical Description
Gooseneck:
Gooseneck with chamfered front corners at 45° and rear taper of approx. 750 mm x 10°.
3 pairs of lashing rings (LC 5,000 daN).
Hardwood flooring, 30 mm thick.
Loading platform:
Loading platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear slope of approx. 1,000 mm x 8°.
6 pairs of folding lashing rings facing outward (LC 5,000 daN).
2 pairs of folding lashing rings facing outward (LC 10,000 daN).
1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN).
Cut-outs in the outer frame of the loading platform for attaching tensioning straps. (LC 2,000 daN).
Hardwood flooring approx. 48 mm thick, above the axles fitted with chequer-plate covering.
Ramps:
Two-piece steel ramps: One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering.
Ramps with hydraulically foldable ramp sections, hydraulic lifting device and can be hydraulically adjusted laterally.
Maximum load per pair: 40,000 kg
Landing Legs:
JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load).
Tyres:
235/75 R 17.5 tyres as per manufacturer's selection.
Axles:
SAF axles, air-suspended, with drum brakes, featuring lift/lower function.
Last axle is force-steered with electro-magnetic reverse lock, activatable via reverse gear or manually.
Axle tools.
Brake System:
Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit.
Steel Construction:
Steel construction made from high-strength fine-grained steel.
Steel grades:
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)
Painting:
Premium and durable corrosion protection via sandblasted welded frame, primed with 2-component (2K) zinc dust primer. High-quality single-tone 2-component (2K) top coat in RAL colours of your choice. Rear metalized and painted in RAL 9010 (pure white). Metallic paint not possible.
Electrical System:
Electrical system compliant with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets. ISO-compliant connections.
24N ISO-1185
24S ISO-3731
15-pin ISO-12098
Accessories Included
2" king pin
One galvanized steel front bulkhead approx. 400 mm high.
At the galvanized front connection strip yellow/red airline couplings.
4 wheel chocks with holder on the front bulkhead (± 5kg).
Cable for supplying electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long, max. 250A) between semi-trailer and tractor unit, with plug connection (ANDERSON-ANDERSON).
Galvanized folding supports under the rear slope of the loading platform.
Bracket for a rotary beacon at the rear of the trailer.
Control valves for the ramps installed on right-hand side of trailer (± 4kg).
Yellow reflective tape according to EU regulations on the sides and rear of the trailer.
Electro-hydraulic unit mounted at the rear under the loading
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLEMAX TRAILER MAX100 4A 8.60 U
Çağrı
Koşul: yeni, toplam ağırlık: 58.000 kg, Üretim yılı: 2026, Low-bed semi-trailer MAX100 4 A 8.60 U
Technical Data
Speed: 80 km/h
Gross Vehicle Weight: 60,800 kg
Fifth Wheel Load: 18,000 kg
Axle Load: 42,800 kg
Tare Weight:
Payload:
Gooseneck Length: 3,850 mm
Loaded Fifth Wheel Height: 1,250 mm
Loading Platform Length: 8,600 mm
Extendable by: 5,400 mm
Axle Spacing: 1,360 mm
Steering Radius (rear): 2,300 mm
Loading Height at Max. Load: 860 mm
Overall Width: 2,540 mm
Suspension Stroke: -55/+145 mm
Technical Description
Gooseneck
With 45° chamfered front corners and rear chamfer approx. 760 mm x 10°
3 pairs of lashing rings (LC 5,000 daN)
30 mm thick hardwood floor
Extendable loading platform
With rear bevel approx. 1,000 mm x 8°
5 pairs of outward-folding lashing rings (LC 5,000 daN)
3 pairs of outward-folding lashing rings (LC 10,000 daN)
1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000)
Approx. 48 mm thick hardwood flooring, chequer plate above the axles
Ramps
Two-part steel ramps
One pair of galvanized, two-part steel ramps, approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm hardwood flooring
Ramp sections hydraulically lifted and folded in, hydraulic lift and hydraulically adjustable position
Max. load per pair: 40,000 kg
Tyres
235/75 R 17.5
Brake System compliant with EU regulations, with EBS-E (4S3M)
Without connection lines to the tractor unit
Paintwork
First-class, long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by 2-component zinc dust primer
High-quality 2-component (2K) top coat, single colour, in RAL shades of choice
Rear section metallized and painted in RAL 9010 (Pure White)
Landing Legs:
JOST mechanical landing legs with 2-speed gearbox for 24t
Lifting capacity (50t test load)
Steel construction made from high-strength fine-grained steels.
Steel Qualities:
Steel construction made from high-strength fine-grained steel
Nwodpfx Asg Sk T Deknsg
S355J2+N/S355MC (Yield Strength 355MPa)
S690QL/S700MC (Yield Strength 690MPa)
Electrical System according to EU regulations, lighting: LED 24 Volt ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets
Connection as per ISO.
24N IS0-1185
24S IS0-3731
15-pin IS0-12098
Accessories included:
One galvanized steel headboard approx. 400 mm high
2" king pin
4 wheel chocks with holders on the headboard
One holder for revolving beacon at rear of trailer
SAF axles, two rigid axles, one self-steering axle, air suspension, with drum brakes, with raise/lower function
The self-steering axle with electromagnetic reverse lock, can be activated by reverse gear or manually
Axle tools included
Support for ALU approach ramps at the rear of the gooseneck
Galvanized folding supports under the loading platform chamfer
Mechanical safety lock for the loading platform extension
One spare wheel with holder in front of the headboard
Yellow reflective tape as per EU regulations on sides, extension, and rear of trailer
At the front galvanized connector strip, yellow-red air couplings
On gooseneck and rear apron left and right, mounts for warning plates, including sockets
A mudflap at the rear of the trailer
Manual and description
On the gooseneck: Plug-in aluminium sideboards and rear wall, approx. 2,440 x 400 mm (LxH)
Rear galvanized stanchions are removable
Body length approx. 2,560 mm, +/- 46 kg
3 pairs of WADER container locks in the loading platform for a 20', 30', or 40' container (±30 kg)
6 pairs of pockets for plug-in stanchions
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLEMAX510-Z-2H-ATX-A-6.85-PA
Çağrı
Koşul: yeni, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, Technical Data MAX510-Z-2H-ATX-A-6.85-PA
Speed: 80 km/h
Gross weight: 47,000 kg
Fifth wheel load: 23,000 kg
Axle load: 24,000 kg
Gooseneck length: 3,750 mm
Loaded saddle height: 1,200 mm
Rear steering radius: 2,300 mm
Loading platform length: 6,850 mm
Extendable by: 5,500 mm
Loading height at maximum load: 350 mm
Chassis length: 2,600 mm
Rear chassis loading height at max. load approx: 1,005 mm
Suspension travel: -150/+450 mm
Axle spacing: 1,360 mm
Overall width: 2,540 mm
Gross weight depends on fifth wheel load.
Lowbed: Lowbed with external beams, extendable version "SUPER LOW" design, length approx. 6,850 mm.
Lowbed with fixed hardwood floor approximately 40 mm thick and mechanical locking device. Supply lines are protected inside the extendable beams and automatically adjust to the respective lowbed length.
5 pairs of lashing rings, foldable outward (LC 10,000 daN).
6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings.
Rear chassis: Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at rear.
2 pairs of lashing rings, foldable outward (LC 10,000 daN).
1 pair of lashing rings, flat in the trough (LC 8,000 daN + 5,300 daN).
2 pairs of pocket sockets for stanchions 100 x 50 mm in the external frame.
Gooseneck: Gooseneck in SNT design to optimize usable platform length, length approx. 3,785 mm.
Gooseneck hydraulically lift/lowerable and detachable.
Technical fifth wheel load: 23,000 kg
For tractor units: 4x2, 6x2, and 6x4
PENDLE-AXLE: “PENDLE-AXLE”, all axles hydro-mechanically forced steered. Hose rupture valve on the axle compensation cylinder with automatic RESET function. Hydraulic cylinders with shut-off valves and plug pins for securing in raised position. Axles finished with two coats of 2-component paint, single color "FAY-Grey-34-0260".
Technical axle load: 12,000 kg
Nwedeizu Nwjpfx Akneg
Hydraulic axle compensation. Axle tools.
Brake system: Brake system in accordance with EU regulations, with EBS-E (2S2M) without connecting lines to the tractor unit.
Electrical system: Electrical system according to EU regulations, 24V lighting ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection strip with 24N, 24S, and 15-pin sockets. Connection according to ISO:
- 24N ISO-1185
- 24S ISO-3731
- 15-pin ISO-12098
Steel construction: Steel construction made of high tensile fine-grained steels. Steel grades:
- S355J2+N/S355MC (yield strength 355MPa)
- S690QL/S700MC (yield strength 690MPa)
Painting: Premium, long-lasting corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer. Premium two-component (2K) topcoat in one RAL color of your choice. Rear section metallized and painted in RAL 9010 (Pure White). No metallic paint possible.
Tyres: Tyres 245/70 R 17.5 3PMSF
Manufacturer’s choice. Load index (146/146F).
Prepared for fitting of bolt-on container positions for 1x 20' or 1x 40' container on the external beams. Without container locks.
• 2” king pin
• Galvanized steel front wall approx. 400 mm high
• 1 spare wheel with holder in front of the front wall
• 2 wheel chocks with holder on the front wall
• Yellow-red air couplings on the galvanized connection strip at the front.
Remote steering from front and rear via cable remote control with pushbuttons, with single-track axle monitoring (without installation in the tractor unit).
Hydraulic connections from the gooseneck to the lowbed
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLEMAX100-N-3B-9.30-(CS)-U
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.461 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.480 mm, toplam yükseklik: 860 mm, Üretim yılı: 2026, Technical Description
Gooseneck:
Gooseneck with rear taper approx. 750 mm x 10°.
3 pairs of lashing rings (LC 5,000 daN).
30 mm thick hardwood flooring.
Loading Area:
Hydraulically liftable and lowerable platform after the gooseneck, approx. 2,800 mm in length, with rear taper approx. 1,000 mm x 8°.
6 pairs of fold-out lashing rings to the outside (LC 5,000 daN).
2 pairs of fold-out lashing rings to the outside (LC 10,000 daN).
1 pair of foldable lashing rings to the inside on the front central beam (LC 10,000 daN).
Grating floor covering C40/4 (point load 2.3 t on an area of 20 x 20 cm), over the axles tread plate covering.
Two-Piece Steel Ramps:
One pair of galvanized two-part steel ramps approx. 3,185 + 1,420 x 1,250 mm with grating covering C40/5 (point load 8 t on an area of 20 x 20 cm).
Ramps with hydraulically folding ramp sections and hydraulic lifting mechanism.
Maximum load per pair: 40,000 kg
In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm in driving position are not included in the overall vehicle length of 16,500 mm.
Landing Legs:
JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load).
Tyres:
235/75 R17.5 3PMSF tyres at the manufacturer’s discretion.
TPMS:
TPMS tyre pressure monitoring system according to ECE R 141.
Data transmission to the towing vehicle via the standardized EBS interface according to ISO 11992. For proper display, the towing vehicle must be capable of transmitting and displaying this data.
Axles:
BPW axles and suspension, 2 rigid axles, 1 trailing steering axle.
Technical axle load: 12,000 kg
Electromagnetic reverse lock, activated by reverse gear and manually.
Air suspension with lift and lower valve.
Axle tools.
Brake System:
WABCO brake system in accordance with EU regulations with EBS-E (2S2M) without connection lines to the tractor unit.
Electrical System:
Electrical system complying with EU regulations, 24-volt LED lighting ASPÖCK-NORDIK (ASS3).
All LED side marker lights flash with the indicators.
ASPÖCK-UNIBOX at the front connection strip with sockets 24N, 24S & 15-pin.
Connections in accordance with ISO:
24N ISO-1185
24S ISO-3731
15-pin ISO-12098
Steel Structure:
Manufactured from high-strength fine-grained steels.
Steel grades:
– S355J2+N / S355MC (yield strength 355 MPa)
– S690QL / S700MC (yield strength 690 MPa)
Curtain Body:
Curtain body ??? 3,960 mm ???
– Galvanized front wall with tensioning system for sliding curtains.
– "EDSCHA" brand roof, forward-sliding on ALU roof bow profiles (bolted to front and rear wall).
– 3 pairs of sliding stakes in the loading area.
– Rear of the body hydraulically extendable to left and right by approx. 750 mm.
– Sliding roof with upwards foldable portal beam.
– Sliding curtain with 700 mm length reserve, lashing straps approx. every 600 mm.
– Height to upper edge of body approx. 3,960 mm (loaded).
Nsdjw Dl Hwopfx Aknewg
– Driving with open sliding roof is prohibited and will damage the curtain.
Paintwork:
Entire steel structure is automatically blast-cleaned with a wheel blasting machine after welding. Second blast treatment with corundum for optimal coating adhesion.
HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection.
Final painting with 2 coats of 2K topcoat, single colour, shade of choice according to RAL system 841GL.
Rear section metallized and painted in RAL 9010 (pure white). No metallic paint.
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLEPlateauauflieger MAX200-N-3A-13.60-19.5-2.54
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.156 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, MAX200-N-3A-13.60-19.5-2.54
Technical Data
Speed: 80 km/h
Gross vehicle weight: 45,000 kg
Fifth wheel load: 18,000 kg
Axle load: 27,000 kg
Tare weight (+/- 3%): 8,844 kg
Payload approx.: 36,156 kg
Platform length: 13,600 mm
Loaded fifth wheel height: 950–1,050 mm
Swing clearance at rear: 2,300 mm
Extendable by: 3,400 mm
Axle spacing: 1,360 / 1,405 mm
Overall width: 2,540 mm
Technical Description
Load platform:
Load platform in extendable design with pneumatically operated locking mechanism.
2 pairs of lashing rings (LC 5,000 daN).
1 pair of lashing rings (LC 10,000 daN).
6 pairs of fold-out lashing rings (LC 5,000 daN).
2 pairs of fold-out lashing rings (LC 10,000 daN).
Cut-outs in the outer frame of the platform for attaching tension straps (LC 2,000 daN).
Landing legs:
JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load).
Axles:
SAF axles: SAF CD axles, air-suspended, with disc brakes (377 mm), with lift/lower function (ET 120).
Trailing steering axles with electro-magnetic reversing lock, activated via reverse gear or manually.
Axle tools (± 80 kg).
Brake system:
Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit.
Steel construction:
Steel structure made of high-strength fine-grain steels.
Steel grades:
Nodpfx Aeg Sk Tvsknowg
S355J2+N / S355MC (yield strength 355 MPa)
S690QL / S700MC (yield strength 690 MPa)
Paintwork:
Premium, long-lasting corrosion protection for the standard shot-blasted welded frame ensured by a two-component (2K) zinc-rich primer. High-quality two-component (2K) topcoat, single-colour, in RAL tones of your choice.
Rear section metallised and painted in RAL 9010 (pure white).
Metallic paint not available.
Electrical system:
Electrical system according to EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3).
ASPÖCK-UNIBOX on the front connector panel with sockets 24N, 24S & 15-pin.
Connections according to ISO:
24N ISO-1185
24S ISO-3731
15-pin ISO-12098
Standard accessories included:
Yellow-red air couplings on the galvanised front connector panel.
2 wheel chocks with holders.
2" kingpin.
Galvanised steel front wall, approx. 2,200 mm high (± 105 kg), EN12642-XL compliant.
Yellow reflector tape according to EU regulations; fitted along the sides, on the extension, and the rear of the trailer.
European reflective warning plates (red-yellow) at the rear of the trailer.
Platform with approx. 38 mm hardwood floor (± 320 kg).
10 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the platform (± 30 kg).
1 spare wheel holder under the platform, right-hand side in direction of travel.
Tyres 435/50 R 19.5, manufacturer’s choice.
One mud flap at the rear of the trailer.
Manual and documentation on USB stick.
Bracket for rotating beacon at the rear of the trailer.
At the gooseneck and rear panel, left and right, brackets for warning signs, incl. socket.
One transverse INOX toolbox under the platform (1,000 x 400 x 250 mm) (± 135 kg).
6 pairs of WADER container locks in the platform for 1 x 20’ container, 2 x 20’ containers or 1 x 40’ container; an additional locking position provided in the extension for a 45’ container (± 90 kg).
4 pairs of WADER container locks (± 60 kg).
10 pairs of galvanised plug-in stakes approx. 100 x 50 mm, 1,000 mm high (± 220 kg).
3 pairs of crosswise stake pocket bars mounted in the platform for plug-in stakes 100 x 50 mm (± 95 kg).
Storage for 1,000 mm plug-in stakes (± 45 kg).
1 spare wh
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLEMAX100-N-4X-9.30-(CS)
Çağrı
Koşul: yeni, azami yük ağırlığı: 40.017 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Technical Description
Gooseneck:
Gooseneck with rear chamfer approx. 750 mm x 10°.
3 pairs of lashing rings (LC 5,000 daN).
Hardwood flooring, 30 mm thick.
Loading Area:
5 pairs of fold-out lashing rings (LC 5,000 daN).
3 pairs of fold-out lashing rings (LC 10,000 daN).
1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN).
Hardwood flooring approx. 48 mm thick, tread-plate covering over the axles.
Landing Legs:
JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load).
Tyres:
Tyres 205/65 R17.5, manufacturer’s choice.
TPMS:
TPMS tyre pressure monitoring system in accordance with ECE R 141.
Data transmission to the tractor unit is via the standardised EBS interface as per ISO 11992. For correct display, the tractor unit must be capable of transmitting and displaying this data.
Axles:
BPW axles: two fixed axles, two self-steering axles, air suspension, drum brakes, lifting/lowering function.
The self-steering axles have electro-magnetic reverse lock, activated via reverse gear or manually.
Axle tool included.
Brake System:
WABCO brake system compliant with EU regulations with EBS-E (4S3M), no connecting lines to the tractor unit.
Electrical System:
Electrical system as per EU regulations, 24 Volt LED lighting ASPÖCK-NORDIK (ASS3).
All LED side marker lights synchronise with the indicator.
ASPÖCK-UNIBOX on the front connection rail with 24N, 24S & 15-pin sockets.
Connections in accordance with ISOs:
Nedpfsw Dl Hqox Aknjwg
24N ISO-1185
24S ISO-3731
15-pin ISO-12098
Steel Construction:
Steel structure made from high-strength fine-grained steels.
Steel grades:
– S355J2+N/S355MC (yield strength 355 MPa)
– S690QL/S700MC (yield strength 690 MPa)
Paintwork:
Entire steel structure automatically shot blasted after welding using a shot blasting system. Second blasting treatment with corundum for optimum adhesion of the coating system.
HRM metallisation of the complete chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection.
Final painting: two coats of 2-pack topcoat, single-colour in a shade of choice according to the RAL 841GL system.
Rear section metallised and painted in RAL 9010 (pure white). Metallic finishes not available. Paint specification tested according to salt spray test ISO 9227-NSS.
Cavity sealing with special wax.
Options Included:
2'' kingpin
One galvanised steel front wall.
Yellow-red air couplings fitted to the galvanised front connection rail.
2 wheel chocks with holders on the front wall.
Mountings at the rear of the gooseneck for ALU ramps.
Further options available.
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLEMultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR
Çağrı
Koşul: yeni, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, 3-axle MULTIMAX PLUS low-loader semi-trailer, air-suspended and hydraulically forced-steered axles.
Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR
Speed: 80 km/h legal
Gross weight: 49,500 kg or 31,500 kg
Fifth wheel load: 18,000 kg
Axle load: 31,500 kg
Gooseneck length approx.: 3,900 mm
Gooseneck width approx.: 2,480 mm
Kingpin turning radius to rear approx.: 2,100 mm
Coupling height when loaded approx.: 1,205 mm
Loading area length approx.: 9,600 mm
Extendable by approx.: (value not specified)
Loading area width approx.: 2,540 mm
Loading height at max load approx.: 890 mm
Suspension travel approx.: -55/+145 mm
Axle distance: 1,360 mm
Gross weight dependent on fifth wheel load: Yes
Special permit required if country-specific legal limits are exceeded.
Nwedjizu Ntspfx Aknjg
Technical Description
Gooseneck: SNT design gooseneck to optimize loading platform length, approx. 3,900 mm length, with rear chamfer approx. 1,000 mm x 6°.
Technical fifth wheel load: 18,000 kg. For tractor units: 4x2 and 6x2.
Loading area: Loading platform approx. 9,600 mm length with rear chamfer approx. 900 mm x 6°. Section after the gooseneck is hydraulically raisable/lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg.
Ramps: DR-10-900-4920-GR-HV-AXS
Pair of two-section AXS steel ramps, approx. 4,920 mm long and 900 mm wide. Open grating surface. Hydraulically folding ramp tips. Each ramp hydraulically shiftable approx. 235 mm outward and approx. 365 mm inward. Maximum load and ramp angle as per technical datasheet: C470319. Maximum gradient at lowered loading area: 9°
Axles and Suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg. Air suspension with lift/lower valve. Axle tools included.
Tyres: 235/75 R 17.5 3PMSF twin tyres. Brand at our discretion. Load index 143/141J (144/144F).
Braking system: WABCO EBS-E braking system per EU regulations. No cables to the tractor unit.
Lighting system: 24V "ASPÖCK-NORDIK full LED" lighting per EU regulations (ASS 3).
Metallisation: Complete HRM (High Resistance Metallisation). Full steel structure shot-blasted, then hot-coated with ZINACOR 850 (85% zinc / 15% aluminium).
Painting – 6-stage finish:
- Complete steel structure shot-blasted after welding
- 1 coat zinc-based primer, 1 coat adhesion primer
- Top coat with 2 coats 2K acrylic paint, single colour in RAL shade of choice
- Cavity sealing with special wax
- Rims in silver
- Multicolour & special paint available at extra cost
Steel structure: High-tensile fine-grain steels
Types: S355J2+N/S355MC (yield stress 355 MPa), S690QL/S700MC (yield stress 690 MPa)
Welders certified to DIN-EN 287-1, MAG welding per EN ISO 4063, M21 shielding gas as per EN ISO 14175.
Front wall: Removable steel front wall, approx. 400 mm high.
Supply connection strip for connections to tractor unit, fitted at outer frame profile height.
ASPÖCK-UNIBOX at the front supply strip with 24N, 24S & 15-pin sockets.
- 24N connection per ISO-1185
- 24S connection per ISO-3731
- 15-pin connection per ISO-12098
If your pin assignment deviates from the ISO standard, please inform us.
"Anderson" socket on front supply strip: Rema 78051-00 & Amp. 150 V.
Cable for the supply of the electro-hydraulic power pack and/or electric winch (35 mm²,
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX510 Tiefbett 2x10 t
Çağrı
Koşul: yeni, azami yük ağırlığı: 30.190 kg, toplam ağırlık: 43.000 kg, dingil konfigürasyonu: 2 dingil, Donanım: ABS, You can find our full range of vehicles, including immediately and short-term available units, on our website.
Excerpt from the Equipment List. Complete equipment details available upon request.
Loading Platform:
- Low bed with external beams, designed as extendable SUPER LOW version, approx. 6,850 mm in length
- Low bed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking
- Service lines routed securely inside the extendable beams, automatically adjusting to the respective bed length
- 5 pairs of lashing rings, foldable to the outside (LC 10,000 daN)
- 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings
Gooseneck:
- Gooseneck in SNT design for optimized loading length, approx. 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and detachable
- Technical fifth wheel load: 23,000 kg
- For tractor units: 4x2, 6x2
Rear Chassis:
- Rear chassis in short version with closed outer frame and checker plate cover
- Chassis with excavator recess, closed in the rear half to accommodate air tanks
- 2 pairs of lashing rings, foldable to the outside (LC 5,000 daN)
Nwsdpfxsxarl No Aknjg
- 1 pair of lashing rings, foldable to the outside (LC 10,000 daN)
- 1 pair of lashing rings, horizontal, mounted at the front & rear of the chassis (LC 10,000 daN)
Axles:
- BPW axles with hydro-mechanical forced steering
- Technical axle load: 12,000 kg each
- Air suspension with lift and lower valve
Tyres:
- 245/70 R 17.5 3PMSF tyres
- Manufacturer of our choice
- Load index (146/146F)
- TPMS tyre pressure monitoring system per ECE R 141
- Data transfer to the tractor via standardized EBS interface (ISO 11992)
- The tractor must be capable of transmitting and displaying these data for correct indication
Brake System:
- Brake system compliant with EU regulations, with EBS-E (2S2M)
Electrical System:
- Electrical system compliant with EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3)
- All LED side marker lights flash with the turn signal
- ASPÖCK-UNIBOX on the front connection panel with 24N, 24S, and 15-pin sockets according to ISO:
- 24N ISO-1185
- 24S ISO-3731
- 15-pin ISO-12098
Steel Structure:
- Made from high-strength fine-grained steels
- Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa)
Coating:
- Complete steel frame automatically shot-blasted after welding
- Second blasting treatment with corundum for optimal coating adhesion
- HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for superior corrosion protection
- Final topcoat: 2 layers of 2K paint, single color, RAL 3002 carmine red, in accordance with RAL system 841GL
- Rims in silver
- Rear section metallized and painted in RAL 9010 (pure white)
- Metallic paint not available
- Paint build-up tested in salt spray fog test according to ISO 9227-NSS
- Cavity sealing with special wax
Including the following additional equipment:
- 2-inch king pin
- One galvanized steel front wall, approx. 400 mm high
- Remote steering from front and rear, cable remote controlled via push buttons, with single-track steering alignment (installation in the tractor unit not included)
- Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings
- Electro-hydraulic power unit
- Preparation for mounting of bolt-on container positions for 1x 20' or 1x 40' container on the external beams
- Without container locks
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX110 Semi-Tieflader
Çağrı
Koşul: yeni, azami yük ağırlığı: 45.820 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Excerpt from the equipment. Full specifications available upon request.
Gooseneck:
* Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Loading platform, extendable design:
* Loading platform with extendable section and rear chamfer approx. 1,000 mm x 8°
* 5 pairs of outward folding lashing rings (LC 5,000 daN)
* 3 pairs of outward folding lashing rings (LC 10,000 daN)
* 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN)
* Cutouts in the outer frame for attaching tension belts (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, checker plate over axles
Axles:
* BPW axles and suspension
* 1st axle rigid, all other axles hydro-mechanically forced steered
* Technical axle load: 12,000 kg per axle
* Air suspension with raise/lower valve
* Axle tools included
Tyres:
* Tyres 245/70 R 17.5 3PMSF, load index (146/146 F)
* Manufacturer at our discretion
* TPMS tyre pressure monitoring system according to ECE R 141
* Data transmission to tractor unit via standardised EBS interface per ISO 11992
* For correct display, the tractor unit must support transmitting and displaying these data
Landing legs:
* JOST landing legs (mechanical), 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
Brake system:
* Wabco brake system according to EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit
Paintwork:
* Complete steel structure shot-blasted automatically after welding
* Second blasting using corundum for optimum coating adhesion
* Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red as per RAL System 841GL
* Rims in silver-grey
* Rear section metalized and painted in RAL 9010 (pure white)
* Metallic paint not available
* Coating tested in salt spray test according to ISO 9227-NSS
* Cavities sealed with special wax
Steel structure:
* Steel construction made from high-strength fine-grain steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical system:
* Electrical system according to EU regulations
* Lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with indicators
* ASPÖCK-UNIBOX located on the front connection strip, with 24N, 24S & 15-pin sockets according to ISO
* 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Nedjxbmpfopfx Aknowg
Including the following additional equipment:
* 2-inch kingpin
* Galvanized steel front wall, approx. 400 mm high
* Yellow-red air couplings on front galvanized connection strip
* Electro-hydraulic unit
* Forced steering front/rear via cable remote control (push buttons), with single-track control of the axles (no installation in the tractor unit)
* Galvanized folding supports under the rear chamfer of the platform
* 1 pair of recessed lashing rings along the rear central member in the chamfer (LC 10,000 daN)
* Plug-in aluminium side and rear walls on the gooseneck, approx. 2,440 x 400 mm (L x H)
* Rear galvanized plug-in stanchions removable (superstructure length approx. 2,560 mm)
* Galvanised toolbox integrated into the chamfered gooseneck
* 3 pairs of WADER container pockets in the platform for one 20' (30?) or
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEGigamax Tiefbett 1+3
Çağrı
Koşul: yeni, azami yük ağırlığı: 48.300 kg, toplam ağırlık: 71.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website.
Excerpt from the equipment list. Complete specifications available upon request.
GOOSENECK:
* Gooseneck with integrated single-axle running gear (pendulum axle), removable design
* Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked to the hydraulic axle compensation of the first axles
* Length: approx. 5,200 mm, with front chamfer approx. 60°
* Fifth-wheel load according to data sheet: W25-DSR2700-12/22.7
Nedpfxeyhkqnj Aknowg
* For tractor units: 6x4 or 8x4
* Detachable steel front wall, approx. 400 mm high, with chamfered design
* 1 pair of mechanical supports at the front of the gooseneck
* ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets
* 1 spare wheel mount inside on the front wall of the gooseneck with bracket
* 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN)
* 2 pairs of recessed folding lashing rings in the outer frame of the front undercarriage (LC 10,000 daN)
* 1 pair of lashing rings at the transition from running gear to loading area (LC 10,600 daN)
* On the gooseneck, 1 pair of removable aluminium side walls, approx. 400 mm high, anodized finish
* On the gooseneck, one removable aluminium rear wall, approx. 400 mm high, anodized finish
* 3.5 inch kingpin
* TPMS tyre pressure monitoring system according to ECE R 141
* Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917)
* 1 INOX toolbox with single lid, mounted on the right in the direction of travel on the gooseneck next to the aluminium side wall, approx. 1,350 x 400 x 400 mm (L x W x H)
LOADING DECK:
* Low-bed with external beams, designed as a telescopic loading deck in low-profile design with a front extension, includes solid hardwood floor approx. 50 mm thick
* Length x width approx. 8,000 mm x 2,740 mm
* Mechanical bolt-lug coupling between low-bed and running gear for swapping loading decks or installing extension beams
* One locking position approx. every 500 mm in the extension
* 4 pairs of recessed lashing rings lying within the loading area, distributed along the outer frame/beams (LC 10,000 daN)
* 1 lashing ring each on the left and right of the rear cross member (LC 10,000 daN)
* Folding extensions, approx. 230 mm per side (WITHOUT wooden planks)
* Extension planks, loose, framed in steel
* Prepared for the installation of bolt-on container positions for 1x 20’ or 1x 40’ container on the outer beams. Container locks not included
* 6 pairs of threaded blocks between the lashing rings under the upper flange on the outer beam for mounting screw-on rings M24 (LC 8,000 daN)
* 2 pairs of screw rings M24 (LC 8,000 daN) included
REAR RUNNING GEAR:
* Rear undercarriage with closed outer frame, checker plate decking and continuous prism-shaped excavator recess, approx. 1,450 x 900 x 505 mm, open at rear
* PENDULUM AXLE, all axles hydro-mechanically force-steered
* Hose rupture valve on axle compensation cylinder with automatic reset function
* Hydraulic cylinder with shut-off valves and pre-locking pins for securing in raised position
* Final paint of axles in 2 coats of single-color 2K paint, DB 7350 Nova grey
* Technical axle load: 12,000 kg each
* Hydraulic axle compensation
* 245/70 R 17.5 3PMSF. Brand at our discretion
* Remote steering from front and rear via cable remote control, with single-track axle control, without installation in the tractor unit
* 4 pairs
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Plus Satteltieflader Hebebett
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.400 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website.
Excerpt from the equipment. Full equipment list available upon request.
Gooseneck in SNT design to optimize loading deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6°
* For tractor units: 4 x 2 and 6 x 2
* ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic power unit for controlling hydraulic operations, excluding hydraulic winches. Without installation of supply connections on the tractor unit
* Outer beams of the gooseneck with mounting holes for boltable lashing rings. The first hole approx. 200 mm from the front, then every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* One mounting hole in the upper rear area of the gooseneck's outer beams for a bolt-on lashing ring
Nsdpsyhkqusfx Aknowg
* 1 pair of screw-in lashing rings included (LC 10,000 daN)
* 3 pairs of recessed lashing rings inside on the gooseneck's outer beam (LC 5,000 daN)
* 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN)
* 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN)
* On the gooseneck and rear chamfer, grating surface with 5 mm steel reinforcement
* 2-inch king pin
* Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917)
* Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m in length) between trailer and tractor unit with NATO-NATO plugs
* On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish
LOADING AREA:
* Loading area, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6°
* Loading area behind gooseneck hydraulically height-adjustable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg
* TPMS tire pressure monitoring system in accordance with ECE R 141
* BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle steered. 3rd axle with electromagnetically controlled reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
* 235/75 R 17.5 3PMSF twin tires. Make at our discretion, load index 143/141J (144/144F)
* Mechanical landing legs with 2-speed gearbox and crank
* Continuous grating surface with approx. 5 mm steel reinforcement underlay, designed for point loads: – on the lift bed – on the loading area
* Painted sand coating on the deck plates of the gooseneck and in the transition areas between neck and lifting bed, between lifting bed and loading area, and between loading area and ramps
* 1 spare wheel mounting bracket under loading area on right side in front of axles
* Cut-outs in the outer frame of the loading area and lifting bed for securing straps (LC 2,000 daN)
* 11 pairs of recessed lashing rings flush in the outer frame of the loading area, foldable outwards (LC 10,000 daN): – 3 pairs in the outer frame of the lifting bed – 8 pairs in the outer frame of the loading area
* 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): – 3 pairs in the lifting bed – 8 pairs in the rear part of the loading area
* Control valves for hydraulic ramps located on the right side of the vehicle
* 1 pair of foldable mechanical rear supports with single-handed operation
HYDRAULIC LOADING RAMPS:
* 1 pair of two-part AXS steel ramps with a length of approx. 4,920 mm and a
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX510 Tiefbett 2x12 t PA
Çağrı
Koşul: yeni, azami yük ağırlığı: 33.750 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete vehicle inventory, including units immediately and short-term available, on our website.
Extract from the equipment list. Full specification available upon request.
Gooseneck:
- Gooseneck in SNT design to optimize loading platform length, approx. 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and detachable
- Technical fifth wheel load: 23,000 kg
- Compatible with tractor units: 4x2, 6x2, and 6x4
Lowbed:
- Lowbed with external beams, extendable SUPER LOW design, approx. 6,850 mm length
- Lowbed with fixed hardwood floor (approx. 40 mm thick) and mechanical locking
- Supply lines protected within the extendable beams, automatically adapting to the lowbed length
- 5 pairs of lashing rings, foldable to the outside (LC 10,000 daN)
- 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings
Rear Chassis:
- Rear chassis with closed outer frame, checker plate covering, and continuous prism-shaped excavator recess, approx. 1,250/700 x 505 mm, open at the rear
- 2 pairs of lashing rings, foldable to the outside (LC 10,000 daN)
- 1 pair of lashing rings recessed in the trough, LC 16,000 daN
- 1 pair of lashing rings recessed in the trough, LC 10,600 daN
- 2 pairs of stake pockets for removable stakes, approx. 100 x 50 mm in the outer frame
Pendel Axles:
- Pendel axles, all axles forced steered by hydro-mechanical linkage
- Hose rupture valve on axle leveling cylinder with automatic reset function
- Hydraulic cylinders with shut-off valves and pre-insert for securing in the lifted position
- Axles painted with 2 layers of single-color 2-component paint in FAY Grey 34-0260
- Technical axle load: 12,000 kg each, with hydraulic axle compensation
- Axle tools
- Tyres: 245/70 R 17.5 3PMSF (brand at our discretion), load index (146/146F)
TPMS:
- TPMS tyre pressure monitoring system compliant with ECE R 141
Brake System:
- Wabco braking system in accordance with EU regulations, EBS-E (2S2M) without connecting lines to the tractor unit
Electrical System:
- Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK lighting (ASS3)
- All LED side marker lights flash with the indicator
- ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets, according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Steel Construction:
- Steel structure made of high-strength fine-grained steels
- Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa)
Coating:
- Complete steel structure is automatically shot-blasted after welding using a turbine blasting machine
- Second blasting treatment with corundum for optimum coating adhesion
- Full chassis metallized by HRM process with ZINACOR 850 (85% Zinc/15% Aluminium) for superior corrosion protection
- Final coating: two layers of 2K topcoat, single-color in RAL 3002 carmine red, according to RAL system 841GL
Nwodjxbmn Uepfx Aknog
Including the following additional features:
- 2-inch king pin
- One galvanized steel headboard, approx. 400 mm high
- Remote steering from front and rear via cable remote with pushbuttons, axle alignment control (without installation in the tractor unit)
- Electro-hydraulic power unit
- 2 pairs of bolted container locks on external beams, including 2 pairs of container locks for 1 x 20' or 1 x 40' container
- On the gooseneck: detachable aluminium drop sides and rear wall, approx. 2,440 x 400 mm (LxH)
- Rear galvanized removable stakes
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader 205er
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 39.780 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2023, bir sonraki muayene (TÜV): 01/2027, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire stock of vehicles, including those available for immediate or short-term delivery, on our website.
Extract from the equipment list. Complete specification upon request.
Gooseneck:
* Gooseneck with approx. 45° chamfered front corners and a rear chamfer of approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Loading area:
* Extendable loading bed
* 5 pairs of outward-folding lashing rings (LC 5,000 daN)
* 3 pairs of outward-folding lashing rings (LC 10,000 daN)
* 1 pair of flat lashing rings at the front of the loading bed (LC 10,000 daN)
* Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles
Landing legs:
* JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Tyres:
* Tyre size 205/65 R 17.5, twin-mounted
Axles:
* BPW axles, two fixed axles, two air-suspended self-steering axles, with drum brakes and lift/lower function
* The self-steering axles have an electromagnetically controlled reverse lock, operable via reverse gear or manually
Brake system:
* Brake system compliant with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit
Steel structure:
* High-strength fine-grained steel construction
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Paintwork:
* Premium and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer
* High-quality single-colour 2-component (2K) top coat in RAL 3002 Carmine Red
* Rear section metallised and painted in RAL 9010 Pure White
* Rims in silver
Electrical system:
* Electrical system according to EU regulations
Lighting:
* 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with sockets 24N, 24S & 15-pin connection per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098
Included accessories:
* 2-inch kingpin
* Galvanised steel front wall approx. 400 mm high
* Spare wheel carrier in front of the front wall
* Yellow-red air couplings mounted on the galvanised connection rail at the front
* 4 wheel chocks with holders on the front wall
* Mountings at the rear of the gooseneck for aluminium loading ramps
* Galvanised folding supports under the rear slope of the loading area
* Bracket for a beacon at the rear of the trailer
* Yellow reflective tape as per EU regulations at sides, extension, and rear
Nodpjx Uvlrefx Aknjwg
* Mounts for warning plates, left and right on the gooseneck and rear panel, including socket
* Mudflap at the rear of the trailer
* Manual and documentation on USB stick
* European reflective plates (Red-Yellow) at the rear
* 80 km/h speed stickers at the rear and both sides
* Audible reverse warning signal
* Load pressure gauge for axle load determination, including load chart
Küçük ilan
Essen
2.594 km
Çalışma platformlu yarı römork
FAYMONVILLEMAX210 Telesattel Megatrailer
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 36.650 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2021, bir sonraki muayene (TÜV): 11/2025, Donanım: ABS, Extract from Equipment Specifications
Nedpfxex Epzno Aknjwg
Loading Platform:
• Telescopic loading platform with pneumatically operated locking mechanism.
• 2 pairs of recessed lashing rings (LC 5,000 daN).
• 1 pair of lashing rings in the gooseneck area (LC 10,000 daN).
• 6 pairs of fold-out outer lashing rings (LC 5,000 daN).
• 3 pairs of fold-out outer lashing rings (LC 10,000 daN).
• Cutouts in the outer frame of the platform for attaching tensioning straps (LC 2,000 daN).
Landing Legs:
• JOST landing legs (mechanical) with two-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load).
Tyres:
• Tyres 245/70 R 17.5 – brand of our choice.
• Load index (146/146F).
Axles:
• BPW axles with hydro-mechanical forced steering.
• Air suspension with lift and lower valve.
• Axle tools.
Brake System:
• Brake system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit.
Steel Construction:
• Steel structure made from high-strength fine-grained steel.
• Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa).
Paintwork:
• Premium and durable corrosion protection of the standard shot-blasted welded frame through a 2-component (2C) zinc dust primer.
• High-quality single-colour 2-component (2C) topcoat in RAL 3002 Carmine Red.
• Rear section metallised and painted RAL 9010 (Pure White).
• Rims silver.
• Metallic paint not possible.
Electrical System:
• Electrical system according to EU regulations, 24 Volt lighting ASPÖCK-NORDIK (ASS3).
• ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets.
• Connections as per ISO:
- 24N ISO-1185
- 24S ISO-3731
- 15-pin ISO-12098
Warning Panels:
• Brackets for warning panels with socket on both the gooseneck and the rear plate, left and right.
Including the following additional equipment:
- Rear axle steering from the front and rear via cable remote control with pushbuttons, axle tracking control included (without installation in the tractor unit).
- Electro-hydraulic unit (± 45kg).
- 4 wheel chocks with holder on the front wall (± 5kg).
- 2-inch king pin.
- Galvanized steel front wall (EN12642-XL), approx. 1,600 mm high (± 35kg).
- Yellow-red air couplings on the galvanized front connection bar.
- Yellow reflective tape as per EU regulations on the sides, extension, and rear of the trailer.
- European reflective plates (red-yellow) on the rear of the trailer.
- One mud flap at the rear of the trailer.
- Operating manual and description on USB stick.
- Bracket for a beacon light at the rear of the trailer.
- Heavy-duty hardwood flooring on the loading platform.
- 9 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading platform (± 27kg).
- Galvanized extensible side extensions of approx. 230 mm per side (± 230kg).
- Spiral cable for the supply of the electro-hydraulic unit and/or the electric winch (approx. 35 mm², approx. 3.5 m length, max. 250A) between trailer and tractor unit with connector (NATO-NATO).
- Galvanized supports under the sloped section of the loading platform.
- Central beam with sand-coated paint finish for anti-slip protection.
- 6 pairs of WADER container pockets in the loading platform for 1x20' container, 2x20' containers or 1x40' container; an additional locking position is provided in the extension for a 45' container (± 90kg).
- 4 pairs of transverse stake pocket strips mounted on the loading platform for plug-in stakes approx. 100 x 50 mm (± 145
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Radmulden
Çağrı
Koşul: yeni, azami yük ağırlığı: 38.140 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website.
Partial equipment list. Full specifications available on request.
Gooseneck:
- Gooseneck with approx. 45° chamfered front corners and a rear bevel of approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- Hardwood flooring, approx. 30 mm thick
Loading area:
- Telescopic loading area with rear bevel approx. 1,000 mm x 8°
- Between the 1st and 2nd axle, one pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D)
- Incl. 3-piece removable, galvanized wheel recess covers (approx. 670 mm wide - max. point load 5 t each)
- 1 pair of recessed lashing rings at the front of the loading deck (LC 10,000 daN)
- 4 pairs of outward folding lashing rings (LC 5,000 daN)
- 3 pairs of outward folding lashing rings (LC 10,000 daN)
- Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN)
Landing legs:
- JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Tyres:
Tyres 235/75 R17.5 3PMSF, brand at our discretion
- TPMS tyre pressure monitoring system according to ECE R 141
- Data transmission to the truck via the standardised EBS interface per ISO 11992
- For correct display, the truck must be capable of transmitting and displaying this data.
Axles:
- BPW axles and suspension, 2 fixed axles, 3rd axle self-steering
- Technical axle load: 12,000 kg
- Electromagnetic reversing lock, activatable via reverse gear and manually
- Air suspension with lift and lower valve. Axle tools
Brake system:
- WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit
Nsdpfxsw Tpq Do Aknjwg
Electrical system:
- Electrical system in accordance with EU regulations
- LED lighting 24 Volt ASPÖCK-NORDIK (ASS3)
- All LED side marker lights flash with the indicator
- ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098
Steel structure:
Steel frame made of high-strength fine-grain steels.
- Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Paintwork:
- Entire steel structure is automatically blasted after welding using a turbine blasting system
- Second blasting with corundum for optimal coating adhesion
- HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure top corrosion protection
- Final painting with two coats of 2K paint, solid colour in RAL 3002 Carmine Red, rear section metallised and painted in RAL 9010 Pure White
- No metallic paint possible
- Paint finish tested in salt spray test per ISO 9227-NSS
- Sealing of cavities with special wax
Including the following accessories:
- Mounts for warning signs on both sides at the gooseneck and at the rear, including socket
- Spare wheel holder in front of the front wall (without spare wheel)
- 2-inch kingpin
- Galvanized steel front bulkhead, approx. 400 mm high
- Yellow-red air couplings on the galvanized front connection panel
- Galvanized folding supports under the loading area bevel
- Hardwood impact protection on the rear wall from gooseneck to loading platform
- 1 pair of recessed lashing rings along the central frame at the rear on the bevel (LC 10,000 daN)
- Aluminium side walls and tailboard on the gooseneck
Küçük ilan
Essen
2.594 km
Çalışma platformlu yarı römork
FAYMONVILLEMAX Trailer MAX210 Telesattel
Çağrı
Koşul: yeni, azami yük ağırlığı: 38.400 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle stock with immediately and short-term available vehicles on our website.
Excerpt of the equipment. Complete equipment list available upon request.
Loading platform:
* Extendable loading platform with pneumatically operated locking mechanism
* Loading platform with approx. 30 mm thick wooden planks
* 7 pairs of folding lashing rings to the outside (LC 5,000 daN)
* 3 pairs of folding lashing rings to the outside (LC 10,000 daN)
* Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN)
Landing legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Tyres:
* Tyres 385/65 R 22.5, brand of our choice
* TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. The tractor unit must be capable of receiving and displaying this data for accurate monitoring.
Axle:
* BPW axles and suspension
* All axles hydro-mechanically forced-steered
* Disc brakes
* Technical axle load: 10,000 kg each (ET 0)
* Air suspension with lifting and lowering valve
* Axle tools
Brake system:
* WABCO braking system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit
Steel construction:
* Steel construction made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa)
Electrical system:
* Electrical system in accordance with EU regulations
* 24 Volt LED lighting ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicator
* ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098
Painting:
* Complete steel construction automatically blast-cleaned by shot blasting machine after welding
* Second blasting with corundum for optimal coating adhesion
* Final coating with 2 layers of 2K top coat, single-colour in RAL 3002 Carmine Red according to RAL System 841GL
Nwsdpfx Akow Tpr Ionog
* Rims in silver grey
* Rear section metallized and painted in RAL 9010 (Pure White)
* Metallic paint not possible
* Coating structure tested in salt spray test according to ISO 9227-NSS
* Cavity sealing with special wax
Accessories:
* Remote steering from the front and rear via cable remote control with push buttons, with axle tracking control (installation in the tractor unit not included)
* Electro-hydraulic unit
* 4 wheel chocks with holders at the front wall
* 2 inch king pin
* At the galvanized connection rail in front, yellow-red air couplings
* Mountings for warning boards left and right on neck and rear, including socket
* 10 pairs of stanchion pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the platform
* One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
* 6 pairs of WADER container locks in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; an additional locking point provided in the extension for a 45' container
* 4 pairs of transverse stanchion pockets mounted across the platform for plug-in stakes approx. 100 x 50 mm
* Storage for up to 9 pairs of plug-in stakes bolted to the front wall on the inside
* Climbing ladder mounted left and right in the direction of travel
* One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted at the front under the loading platform on the l
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader (2+2) - nachlaufgelenkt
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 51.870 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2025, bir sonraki muayene (TÜV): 03/2026, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of immediately and short-term available vehicles on our website.
Excerpt from the equipment – full specification available on request.
GOOSENECK
Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, rear end tapered approx. 1,000 mm x 10°
* For tractor units: 4x2, 6x2, and 6x4
* Detachable steel front wall, approx. 400 mm high
* At the front connector strip, yellow-red air couplings
* ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic unit for hydraulic operations control
* Outer beams of the gooseneck with mounting holes for bolted lashing rings
* One mounting hole at the upper rear area of the gooseneck outer beams for a bolted lashing ring
* 1 pair of screw-in lashing rings included (LC 10,000 daN)
* On the gooseneck, 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized finish
* On the gooseneck, 1 plug-in aluminum rear board, approx. 400 mm high, anodized finish
* On the gooseneck, approx. 40 mm thick hardwood flooring
* 2-inch king pin
* Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide
* Rear section of the gooseneck prepared for aluminum loading ramps
* Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917)
LOAD PLATFORM
* Extendable load platform, approx. 8,800 mm long, rear end tapered approx. 500 mm x 10°
* Recess in the platform and in the tapered area for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H)
Nwedpfsxtc Uhox Akneg
* TPMS tire pressure monitoring system per ECE R 141
* BPW axles and suspension
* 1st and 2nd axle rigid; 3rd and 4th axles steering trailing axles
* 3rd and 4th axles with electro-magnetic reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
* 235/75 R 17.5 3PMSF twin tires
* Mechanical landing gear, 2-speed gearbox with crank handle, JOST Modul B – static test load approx. 50,000 kg
* Continuous hardwood flooring approx. 50 mm thick on platform, interrupted between axles (increases coefficient of friction)
* Platform locking with conically welded locking profiles at approx. every 250 mm
* Long holes at the front of the platform for attachable and repositionable bridging elements
* Intermediate table with stepped platform, approx. 300 mm wide, for the extension tube with large cross-section, sheet metal cover – front and rear long holes for attachable and repositionable bridging elements – detachable cover level with platform
* 1 pair of lashing rings on the front cross beam (LC 10,000 daN)
* 6 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN)
* Additionally, 1 pair of lashing rings outside on the front cross member of the platform, rotated approx. 90° inwards towards the platform (LC 10,000 daN)
* Extensions (galvanized) extendable by approx. 230 mm per side
* 1 pair of fixed, open wheel recesses up to the extension, approx. 700 x 410 mm (W x D), on the platform in front of the 1st axle, wheel recesses with sheet metal cover and square climbing strips approx. 15 x 15 mm every approx. 200 mm
* Between the 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D). Covers for the wheel recesses split lengthwise, with wooden inlay, outer sections with insert position (cut-off text).
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader (1+3) - hydr. gelenkt
Çağrı
Koşul: yeni, azami yük ağırlığı: 50.400 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our complete range of vehicles with immediately and short-term available vehicles on our website.
Excerpt from the equipment. Full equipment details available on request.
GOOSENECK
* Gooseneck in SNT design to optimize the loading platform length, approx. 3,700 mm long, rear taper approx. 1,000 mm x 10°
* For tractor units: 4 x 2, 6 x 2, and 6 x 4
* Removable steel front wall, approx. 400 mm high
* ASPÖCK UNIBOX at the front connection rail with sockets
* 3 kW electric-hydraulic power unit for controlling hydraulic functions (except hydraulic winches)
* 1 pair of removable aluminum side boards, approx. 400 mm high, anodized
* One removable aluminum rear board, approx. 400 mm high, anodized
* Approx. 40 mm solid hardwood floor above the gooseneck, over the kingpin with checker plate covering
* 2" kingpin
* Socket at the rear of the gooseneck for aluminum loading ramps
* Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917)
LOADING AREA
* Extendable loading area design, approx. 8,800 mm long, with rear taper approx. 500 mm x 10°
Nwsdpfx Aketx Nwnsnjg
* A recess in the loading platform and into the taper for accepting the excavator bucket arm, approx. 3,850 x 750 x 210/290 mm (L x W x H)
* TPMS tire pressure monitoring system according to ECE R 141
* BPW axles and suspension, 1st axle steering, all other axles hydro-mechanically forced-steered
* 1st axle with electric-magnetic reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each, air suspension with lifting and lowering valve
* Tires: 235/75 R 17.5 3PMSF, twin mounting
* Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B – static test load: approx. 50,000 kg
* Continuous hardwood flooring approx. 50 mm thick on the loading area and interrupted between axles (increases friction coefficient)
* 1 intermediate platform, approx. 300 mm wide, for the extension tube with large cross-section
* Extendable galvanised widenings, approx. 230 mm per side (without wooden planks)
* Wheel recesses with 15 x 15 mm square climbing bars in front of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D)
* Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts
* Aluminum elements lockable on the extension tubes of the widenings
* Widenable U-profiles for inserting the aluminum covers:
- on the fixed section behind the gooseneck
- on the intermediate platform
- on the extendable loading area
* Wheel recesses with 15 x 15 mm square climbing bars between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D)
* Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts
* Aluminum elements lockable on the extension tubes of the widenings
* 1 pair of mechanical rear supports
* Remote steering from both the front and rear via cable remote control, with axle single-track control, without installation in the tractor unit
HYDRAULIC LOADING RAMPS
* One pair of two-part steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm long, approx. 900 mm wide
* Hydraulically foldable ramp tips
* Ramps can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward individually
* Super Grip rubber flooring approx. 25 mm and steel deck approx. 5 mm as additional
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX110 Semi-Tieflader
Çağrı
Koşul: yeni, azami yük ağırlığı: 33.865 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website.
Excerpt from the equipment list. Full equipment details available on request.
Gooseneck
* Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Load Platform
* Double extendable version with rear chamfer approx. 500 mm x 8°
* 6 pairs of outward folding lashing rings (LC 5,000 daN)
* 4 pairs of outward folding lashing rings (LC 10,000 daN)
* 1 pair of recess-mounted lashing rings at the front of the loading area (LC 10,000 daN)
* 1 cross table approx. 250 mm
* Hardwood flooring approx. 48 mm thick, with checker plate coverage over the axles
* Cutouts in the outer frame of the loading area for inserting tensioning straps (LC 2,000 daN)
Axles
* BPW axles and suspension, all axles hydro-mechanically forced steered
* Technical axle load: 12,000 kg per axle
* Air suspension with lift and lower valve
* Axle tool kit
Njdpfsw Tprzox Aknowg
Tyres:
* Tyres 245/70 R 17.5, load index (146/146 F)
* Brand of our choice
Landing Legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Brake System:
* Brake system compliant with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit
Paintwork:
High-quality, durable corrosion protection
* High-quality 2-component (2K) topcoat painted in RAL 3002 carmine red
* Rear section metallized and painted in RAL 9010 (pure white)
Steel Construction:
Steel construction made of high-strength fine-grain steels
* Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa)
Electrical System:
* Electrical system according to EU regulations
* Lighting 24 volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098
Including the following additional equipment:
* 2-inch king pin
* Galvanized steel front wall, approx. 400 mm high
* Yellow-red air couplings at the galvanized front wiring panel
* Spare wheel carrier in front of the front wall
* Electro-hydraulic power unit
* Remote steering from the front and rear via cable remote control with push buttons, with single-track axle alignment (without installation in the tractor unit)
* Rear gooseneck mounting point for aluminum loading ramps
* Rear hanging rail for aluminum loading ramps
* Galvanized folding supports under the rear chamfer of the load platform
* On the gooseneck: removable aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H)
* Removable galvanized rear stanchions (body length approx. 2,560 mm)
* Tool box, galvanized, integrated in the chamfered gooseneck
* 4 pairs of WADER container pockets in the load area for 1x 20', 2x 20', 40', or 45' containers
* 8 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the cargo area
* Galvanized wideners, extendable by approx. 230 mm per side
* Movable hanging rails for aluminum loading ramps at the rear of the vehicle
* 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear
* Central lubrication system with 2 BEKAMAX (Pico) pumps using NLGI-2 standard grease and removable protection around the pump
* 2 LED reversing lamps mounted on the rear panel
* HRM Metallization (High Resistance Metallisation). Complete steel structure sh
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Radmulden
Çağrı
Koşul: yeni, azami yük ağırlığı: 37.820 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately or short-term available vehicles on our website.
Excerpt from the equipment list. Full equipment details available on request.
Gooseneck: Gooseneck with front corners beveled at approx. 45° and rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Load platform:
* 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D)
* Wheel recesses with square climbing strips approx. 15 x 15 mm and widenings at the lower section
* Between the 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D)
* Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) - max. point load approx. 5 t/each
* Recess in the beveled area and extending into the load platform for accommodating the excavator dipper stick (approx. 2,900 x 750 x 210/290 mm (L x W x H))
* 1 pair of horizontally mounted lashing rings at the front of the loading area (LC 10,000 daN)
* 5 pairs of outward foldable lashing rings (LC 5,000 daN)
* 3 pairs of outward foldable lashing rings (LC 10,000 daN)
* 2 pairs of lashing rings in the excavator boom recess (LC 5,000 daN)
* Cut-outs in the outer frame of the load platform for attaching tensioning straps (LC 2,000 daN)
One-piece steel ramps:
* 1 pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering
* Ramp with hydraulic lifting system, hydraulically adjustable
* Maximum load per pair: 40,000 kg
* In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not have to be included in the vehicle length when in driving position
Landing legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Nwodpfxew Tpqwj Akneg
Axles:
* BPW axles and suspension, 2 axles rigid, 1 axle self-steering
* Technical axle load: 12,000 kg each
* Electromagnetic reversing lock, can be engaged via reverse gear and manually
* Air suspension with lift and lower valve
* Axle tools
Tyres:
* Tyres 235/75 R 17.5 3PMSF – Brand of our choice
* TPMS tyre pressure monitoring system as per ECE R 141. Data transfer to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be capable of both receiving and displaying this data
Brake system:
* WABCO brake system in compliance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit
Steel construction:
* Steel construction made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical system:
* Electrical system as per EU regulations
* Lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicator
* ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Coating:
* Complete steel structure automatically shot-blasted with turbine system after welding
* Second sandblasting with corundum for optimum adhesion of the coating system
* HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection
* Final coating with two layers of 2K topcoat, plain color RAL 3002 Carmine Red in accordance with RAL system 841GL
* Rims in silver
* Rear section metalliz
Güven mührü
Machineseeker tarafından sertifikalandırılmış bayiler

Küçük ilan
Essen
2.594 km
Çalışma platformlu yarı römork
FAYMONVILLEMAX Trailer MAX410 Ballastauflieger
Çağrı
Koşul: yeni, azami yük ağırlığı: 52.810 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website.
Excerpt from the equipment. Full equipment details available upon request.
Cargo Area:
* Cargo area fitted with approx. 30 mm thick hardwood flooring
* 10 pairs of folding lashing rings (LC 10,000 daN)
Landing Legs:
* Hydraulic landing legs
TPMS:
* TPMS tire pressure monitoring system in accordance with ECE R 141. Data transfer to the truck is via the standardized EBS interface per ISO 11992. The truck must be capable of transmitting and displaying this data for correct read-out.
Axles and Suspension:
* BPW axles, technical capacity 12,000 kg each; first axle fixed, all other axles hydro-mechanically steered, mounted on turntable
* Air suspension with raise/lower valve
* Axle tools
Tyres:
Nsdpfxsxttc As Aknewg
* Tyres 445/65 R 22.5 169 K
Electrical System:
* Electrical system per EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting
* ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets
* Connectors per ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Braking System:
* Wabco braking system per EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit
Steel Structure:
* Structure made from high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Painting:
* Entire steel structure automatically shot-blasted after welding
* Second abrasive blasting with corundum for optimal coating adhesion
* Final painting in 2 layers of 2K top coat, single color RAL 1007 Narcissus Yellow, per RAL System 841GL
* Rear section metallized and painted RAL 9010 (Pure White)
* Rims in silver grey
* Paint structure tested in salt spray test per ISO 9227-NSS
* Cavity sealing with special wax
Including Accessories:
* Cargo area with approx. 30 mm thick hardwood flooring
* 2 inch kingpin
* One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high
* Yellow-red air couplings on the galvanized front connector strip
* One bracket each for warning signs, left and right at the gooseneck and at the rear panel, including socket
* Remote axle steering control from front and rear using cable remote and push buttons, with single-track axle monitoring (no installation in tractor unit)
* Electro-hydraulic power unit
* 12 pairs of stake pockets for removable stakes, approx. 100 x 50 mm, in the outer frame of the cargo area
* Load gauge for axle load determination including load chart
* Lift axle on the front axle with control by TEBS E
* 5 pairs of crosswise stake pocket strips, for removable stakes approx. 100 x 50 mm
* One INOX toolbox 1,200 x 460 x 550 mm, front left under cargo area (in driving direction)
* One shunting coupling with reinforcement attached to the rear crossmember
* BEKAMAX central lubrication system (Pico) with standard grease NLGI-2 and removable cover for the pump
* 2 LED reversing lights mounted on the rear panel
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)
Sizin için aramayı kolaylaştırıyoruz: "sirch unibox abrolltrocknungscontainer"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.
















































































































































































































